What: /sys/bus/iio/devices/iio:deviceX KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware chip or device accessed by one communication port. Corresponds to a grouping of sensor channels. X is the IIO index of the device. What: /sys/bus/iio/devices/triggerX KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: An event driven driver of data capture to an in kernel buffer. May be provided by a device driver that also has an IIO device based on hardware generated events (e.g. data ready) or provided by a separate driver for other hardware (e.g. periodic timer, GPIO or high resolution timer). Contains trigger type specific elements. These do not generalize well and hence are not documented in this file. X is the IIO index of the trigger. What: /sys/bus/iio/devices/iio:deviceX/buffer KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Directory of attributes relating to the buffer for the device. What: /sys/bus/iio/devices/iio:deviceX/name KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Description of the physical chip / device for device X. Typically a part number. What: /sys/bus/iio/devices/iio:deviceX/label KernelVersion: 5.8 Contact: linux-iio@vger.kernel.org Description: Optional symbolic label for a device. This is useful for userspace to be able to better identify an individual device. The contents of the label are free-form, but there are some standardized uses: For proximity sensors which give the proximity (of a person) to a certain wlan or wwan antenna the following standardized labels are used: * "proximity-wifi" * "proximity-lte" * "proximity-wifi-lte" * "proximity-wifi-left" * "proximity-wifi-right" These are used to indicate to userspace that these proximity sensors may be used to tune transmit power to ensure that Specific Absorption Rate (SAR) limits are honored. The "-left" and "-right" labels are for devices with multiple antennas. In some laptops/tablets the standardized proximity sensor labels instead indicate proximity to a specific part of the device: * "proximity-palmrest" indicates proximity to the keyboard's palmrest * "proximity-palmrest-left" indicates proximity to the left part of the palmrest * "proximity-palmrest-right" indicates proximity to the right part of the palmrest * "proximity-lap" indicates the device is being used on someone's lap Note "proximity-lap" is special in that its value may be calculated by firmware from other sensor readings, rather then being a raw sensor reading. For accelerometers used in 2-in-1s with 360° (yoga-style) hinges, which have an accelerometer in both their base and their display, the following standardized labels are used: * "accel-base" * "accel-display" For devices where an accelerometer is housed in the swivel camera subassembly (for AR application), the following standardized label is used: * "accel-camera" What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock KernelVersion: 4.5 Contact: linux-iio@vger.kernel.org Description: String identifying current posix clock used to timestamp buffered samples and events for device X. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency What: /sys/bus/iio/devices/triggerX/sampling_frequency KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Some devices have internal clocks. This parameter sets the resulting sampling frequency. In many devices this parameter has an effect on input filters etc. rather than simply controlling when the input is sampled. As this affects data ready triggers, hardware buffers and the sysfs direct access interfaces, it may be found in any of the relevant directories. If it affects all of the above then it is to be found in the base device directory. The stm32-timer-trigger has the additional characteristic that a sampling_frequency of 0 is defined to stop sampling. What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available What: /sys/.../iio:deviceX/buffer/sampling_frequency_available What: /sys/bus/iio/devices/triggerX/sampling_frequency_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: When the internal sampling clock can only take a specific set of frequencies, we can specify the available values with: - a small discrete set of values like "0 2 4 6 8" - a range with minimum, step and maximum frequencies like "[min step max]" What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Hardware dependent ADC oversampling. Controls the sampling ratio of the digital filter if available. What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Hardware dependent values supported by the oversampling filter. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) voltage measurement from channel Y. In special cases where the channel does not correspond to externally available input one of the named versions may be used. The number must always be specified and unique to allow association with event codes. Units after application of scale and offset are millivolts. Channels with 'i' and 'q' modifiers always exist in pairs and both channels refer to the same signal. The 'i' channel contains the in-phase component of the signal while the 'q' channel contains the quadrature component. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled) differential voltage measurement equivalent to channel Y - channel Z where these channel numbers apply to the physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application of scale and offset are millivolts. What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw KernelVersion: 3.17 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) current measurement from channel Y. In special cases where the channel does not correspond to externally available input one of the named versions may be used. The number must always be specified and unique to allow association with event codes. Units after application of scale and offset are milliamps. What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw KernelVersion: 4.5 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) power measurement from channel Y. The number must always be specified and unique to allow association with event codes. Units after application of scale and offset are milliwatts. What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: Raw capacitance measurement from channel Y. Units after application of scale and offset are nanofarads. What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: Raw differential capacitance measurement equivalent to channel Y - channel Z where these channel numbers apply to the physically equivalent inputs when non differential readings are separately available. In differential only parts, then all that is required is a consistent labeling. Units after application of scale and offset are nanofarads. What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_zeropoint KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: For differential channels, this an offset that is applied equally to both inputs. As the reading is of the difference between the two inputs, this should not be applied to the _raw reading by userspace (unlike _offset) and unlike calibbias it does not affect the differential value measured because the effect of _zeropoint cancels out across the two inputs that make up the differential pair. It's purpose is to bring the individual signals, before the differential is measured, within the measurement range of the device. The naming is chosen because if the separate inputs that make the differential pair are drawn on a graph in their _raw units, this is the value that the zero point on the measurement axis represents. It is expressed with the same scaling as _raw. What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no bias removal etc.) temperature measurement. If an axis is specified it generally means that the temperature sensor is associated with one part of a compound device (e.g. a gyroscope axis). The ambient and object modifiers distinguish between ambient (reference) and distant temperature for contact- less measurements. Units after application of scale and offset are milli degrees Celsius. What: /sys/bus/iio/devices/iio:deviceX/in_tempY_input What: /sys/bus/iio/devices/iio:deviceX/in_temp_input KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Scaled temperature measurement in milli degrees Celsius. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Acceleration in direction x, y or z (may be arbitrarily assigned but should match other such assignments on device). Has all of the equivalent parameters as per voltageY. Units after application of scale and offset are m/s^2. What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_linear_z_raw KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: As per in_accel_X_raw attributes, but minus the acceleration due to gravity. What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw KernelVersion: 4.11 Contact: linux-iio@vger.kernel.org Description: Gravity in direction x, y or z (may be arbitrarily assigned but should match other such assignments on device). Units after application of scale and offset are m/s^2. What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_z_raw KernelVersion: 6.5 Contact: linux-iio@vger.kernel.org Description: Angular displacement between two consecutive samples on x, y or z (may be arbitrarily assigned but should match other such assignments on device). In order to compute the total angular displacement during a desired period of time, the application should sum-up the delta angle samples acquired during that time. Units after application of scale and offset are radians. What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_z_raw KernelVersion: 6.5 Contact: linux-iio@vger.kernel.org Description: The linear velocity change between two consecutive samples on x, y or z (may be arbitrarily assigned but should match other such assignments on device). In order to compute the total linear velocity change during a desired period of time, the application should sum-up the delta velocity samples acquired during that time. Units after application of scale and offset are meters per second. What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglY_raw KernelVersion: 4.17 Contact: linux-iio@vger.kernel.org Description: Angle of rotation. Units after application of scale and offset are radians. What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw KernelVersion: 4.19 Contact: linux-iio@vger.kernel.org Description: Relative position in direction x or y on a pad (may be arbitrarily assigned but should match other such assignments on device). Units after application of scale and offset are milli percents from the pad's size in both directions. Should be calibrated by the consumer. What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Angular velocity about axis x, y or z (may be arbitrarily assigned). Has all the equivalent parameters as per voltageY. Units after application of scale and offset are radians per second. What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Inclination raw reading about axis x, y or z (may be arbitrarily assigned). Data converted by application of offset and scale to degrees. What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Magnetic field along axis x, y or z (may be arbitrarily assigned). Data converted by application of offset then scale to Gauss. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw KernelVersion: 2.6.36 Contact: linux-iio@vger.kernel.org Description: Highest value since some reset condition. These attributes allow access to this and are otherwise the direct equivalent of the Y[_name]_raw attributes. What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw What: /sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: Lowest value since some reset condition. These attributes allow access to this and are otherwise the direct equivalent of the Y[_name]_raw attributes. What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw KernelVersion: 2.6.36 Contact: linux-iio@vger.kernel.org Description: A computed peak value based on the sum squared magnitude of the underlying value in the specified directions. What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw KernelVersion: 3.8 Contact: linux-iio@vger.kernel.org Description: Raw pressure measurement from channel Y. Units after application of scale and offset are kilopascal. What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input KernelVersion: 3.8 Contact: linux-iio@vger.kernel.org Description: Scaled pressure measurement from channel Y, in kilopascal. What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw KernelVersion: 3.14 Contact: linux-iio@vger.kernel.org Description: Raw humidity measurement of air. Units after application of scale and offset are milli percent. What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input KernelVersion: 3.14 Contact: linux-iio@vger.kernel.org Description: Scaled humidity measurement in milli percent. What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw KernelVersion: 3.5 Contact: linux-iio@vger.kernel.org Description: Averaged raw measurement from channel X. The number of values used for averaging is device specific. The converting rules for normal raw values also applies to the averaged raw values. What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset What: /sys/bus/iio/devices/iio:deviceX/in_current_offset What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceX_offset KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If known for a device, offset to be added to [Y]_raw prior to scaling by [Y]_scale in order to obtain value in the units as specified in [Y]_raw documentation. Not present if the offset is always 0 or unknown. If Y or axis is not present, then the offset applies to all in channels of . May be writable if a variable offset can be applied on the device. Note that this is different to calibbias which is for devices (or drivers) that apply offsets to compensate for variation between different instances of the part, typically adjusted by using some hardware supported calibration procedure. Calibbias is applied internally, offset is applied in userspace to the _raw output. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale What: /sys/bus/iio/devices/iio:deviceX/in_deltaangl_scale What: /sys/bus/iio/devices/iio:deviceX/in_deltavelocity_scale What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If known for a device, scale to be applied to Y[_name]_raw post addition of [Y][_name]_offset in order to obtain the measured value in units as specified in [Y][_name]_raw documentation. If shared across all in channels then Y and are not present and the value is called [Y][_name]_scale. The peak modifier means this value is applied to Y[_name]_peak_raw values. What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied calibration offset (assumed to fix production inaccuracies). icm42600: For this device values are real physical offsets expressed in SI units (m/s^2 for accelerometers and rad/s for gyroscope)/ What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available What: /sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias_available What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available KernelVersion: 5.8 Contact: linux-iio@vger.kernel.org Description: Available values of calibbias. Maybe expressed as either of: - a small discrete set of values like "0 2 4 6 8" - a range specified as "[min step max]" What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_capacitance_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_both_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale What: /sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied calibration scale factor (assumed to fix production inaccuracies). If shared across all channels, _calibscale is used. What: /sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available What: /sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale_available KernelVersion: 4.8 Contact: linux-iio@vger.kernel.org Description: Available values of calibscale. Maybe expressed as either of: - a small discrete set of values like "1 8 16" - a range specified as "[min step max]" If shared across all channels, _calibscale_available is used. What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Gender of the user (e.g.: male, female) used by some pedometers to compute the stride length, distance, speed and activity type. What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Lists all available gender values (e.g.: male, female). What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Height of the user (in meters) used by some pedometers to compute the stride length, distance, speed and activity type. What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Weight of the user (in kg). It is needed by some pedometers to compute the calories burnt by the user. What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available What: /sys/.../iio:deviceX/in_anglvel_scale_available What: /sys/.../iio:deviceX/in_magn_scale_available What: /sys/.../iio:deviceX/in_illuminance_scale_available What: /sys/.../iio:deviceX/in_intensity_scale_available What: /sys/.../iio:deviceX/in_proximity_scale_available What: /sys/.../iio:deviceX/in_voltageX_scale_available What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available What: /sys/.../iio:deviceX/out_voltageX_scale_available What: /sys/.../iio:deviceX/out_altvoltageX_scale_available What: /sys/.../iio:deviceX/in_capacitance_scale_available What: /sys/.../iio:deviceX/in_pressure_scale_available What: /sys/.../iio:deviceX/in_pressureY_scale_available KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: If a discrete set of scale values is available, they are listed in this attribute. Unlike illumination, multiplying intensity by intensity_scale does not yield value with any standardized unit. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Hardware applied gain factor. If shared across all channels, _hardwaregain is used. What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available KernelVersion: 5.10 Contact: linux-iio@vger.kernel.org Description: Lists all available hardware applied gain factors. Shared across all channels. What: /sys/.../in_accel_filter_low_pass_3db_frequency What: /sys/.../in_magn_filter_low_pass_3db_frequency What: /sys/.../in_anglvel_filter_low_pass_3db_frequency KernelVersion: 3.2 Contact: linux-iio@vger.kernel.org Description: If a known or controllable low pass filter is applied to the underlying data channel, then this parameter gives the 3dB frequency of the filter in Hz. What: /sys/.../in_accel_filter_high_pass_3db_frequency What: /sys/.../in_anglvel_filter_high_pass_3db_frequency What: /sys/.../in_magn_filter_high_pass_3db_frequency KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: If a known or controllable high pass filter is applied to the underlying data channel, then this parameter gives the 3dB frequency of the filter in Hz. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for channel Y. The number must always be specified and unique if the output corresponds to a single channel. While DAC like devices typically use out_voltage, a continuous frequency generating device, such as a DDS or PLL should use out_altvoltage. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled, no bias etc.) output voltage for an aggregate of channel Y, channel Z, etc. This interface is available in cases where a single output sets the value for multiple channels simultaneously. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Specifies the output powerdown mode. DAC output stage is disconnected from the amplifier and 1kohm_to_gnd: connected to ground via an 1kOhm resistor, 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 42kohm_to_gnd: connected to ground via a 42kOhm resistor, 90kohm_to_gnd: connected to ground via a 90kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 500kohm_to_gnd: connected to ground via a 500kOhm resistor, 640kohm_to_gnd: connected to ground via a 640kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the mode is shared across all outputs. What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Lists all available output power down modes. If Y is not present the mode is shared across all outputs. What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: Writing 1 causes output Y to enter the power down mode specified by the corresponding outY_powerdown_mode. DAC output stage is disconnected from the amplifier. Clearing returns to normal operation. Y may be suppressed if all outputs are controlled together. What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Output frequency for channel Y in Hz. The number must always be specified and unique if the output corresponds to a single channel. Some drivers have additional constraints: ADF4371 has an integrated VCO with fundamendal output frequency ranging from 4000000000 Hz 8000000000 Hz. out_altvoltage0_frequency: A divide by 1, 2, 4, 8, 16, 32 or circuit generates frequencies from 62500000 Hz to 8000000000 Hz. out_altvoltage1_frequency: This channel duplicates the channel 0 frequency out_altvoltage2_frequency: A frequency doubler generates frequencies from 8000000000 Hz to 16000000000 Hz. out_altvoltage3_frequency: A frequency quadrupler generates frequencies from 16000000000 Hz to 32000000000 Hz. Note: writes to one of the channels will affect the frequency of all the other channels, since it involves changing the VCO fundamental output frequency. What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Phase in radians of one frequency/clock output Y (out_altvoltageY) relative to another frequency/clock output (out_altvoltageZ) of the device X. The number must always be specified and unique if the output corresponds to a single channel. What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw Date: May 2012 KernelVersion: 3.5 Contact: Johan Hovold Description: Set/get output current for channel Y. Units after application of scale and offset are milliamps. For some devices current channels are used to specify current supplied to elements used in taking a measurement of a different type. E.g. LED currents. What: /sys/bus/iio/devices/iio:deviceX/events KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: Configuration of which hardware generated events are passed up to user-space. What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold in the specified (_rising|_falling) direction. If the direction is not specified, then either the device will report an event which ever direction a single threshold value is passed in (e.g. [Y][_name]__thresh_value) or [Y][_name]__thresh_rising_value and [Y][_name]__thresh_falling_value may take different values, but the device can only enable both thresholds or neither. Note the driver will assume the last p events requested are to be enabled where p is how many it supports (which may vary depending on the exact set requested. So if you want to be sure you have set what you think you have, check the contents of these attributes after everything is configured. Drivers may have to buffer any parameters so that they are consistent when a given event type is enabled at a future point (and not those for whatever event was previously enabled). What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold on the rate of change (1st differential) in the specified (_rising|_falling) direction. If the direction is not specified, then either the device will report an event which ever direction a single threshold value is passed in (e.g. [Y][_name]__roc_value) or [Y][_name]__roc_rising_value and [Y][_name]__roc_falling_value may take different values, but the device can only enable both rate of change thresholds or neither. Note the driver will assume the last p events requested are to be enabled where p is however many it supports (which may vary depending on the exact set requested. So if you want to be sure you have set what you think you have, check the contents of these attributes after everything is configured. Drivers may have to buffer any parameters so that they are consistent when a given event type is enabled a future point (and not those for whatever event was previously enabled). What: /sys/.../events/in_capacitanceY_adaptive_thresh_rising_en What: /sys/.../events/in_capacitanceY_adaptive_thresh_falling_en KernelVersion: 5.13 Contact: linux-iio@vger.kernel.org Description: Adaptive thresholds are similar to normal fixed thresholds but the value is expressed as an offset from a value which provides a low frequency approximation of the channel itself. Thus these detect if a rapid change occurs in the specified direction which crosses tracking value + offset. Tracking value calculation is devices specific. What: /sys/.../in_capacitanceY_adaptive_thresh_rising_timeout What: /sys/.../in_capacitanceY_adaptive_thresh_falling_timeout KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: When adaptive thresholds are used, the tracking signal may adjust too slowly to step changes in the raw signal. Thus these specify the time in seconds for which the difference between the slow tracking signal and the raw signal is allowed to remain out-of-range before a reset event occurs in which the tracking signal is made equal to the raw signal, allowing slow tracking to resume and the adaptive threshold event detection to function as expected. What: /sys/.../events/in_accel_thresh_rising_value What: /sys/.../events/in_accel_thresh_falling_value What: /sys/.../events/in_accel_x_raw_thresh_rising_value What: /sys/.../events/in_accel_x_raw_thresh_falling_value What: /sys/.../events/in_accel_y_raw_thresh_rising_value What: /sys/.../events/in_accel_y_raw_thresh_falling_value What: /sys/.../events/in_accel_z_raw_thresh_rising_value What: /sys/.../events/in_accel_z_raw_thresh_falling_value What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value What: /sys/.../events/in_magn_x_raw_thresh_rising_value What: /sys/.../events/in_magn_x_raw_thresh_falling_value What: /sys/.../events/in_magn_y_raw_thresh_rising_value What: /sys/.../events/in_magn_y_raw_thresh_falling_value What: /sys/.../events/in_magn_z_raw_thresh_rising_value What: /sys/.../events/in_magn_z_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value What: /sys/.../events/in_voltageY_raw_thresh_rising_value What: /sys/.../events/in_voltageY_raw_thresh_falling_value What: /sys/.../events/in_tempY_raw_thresh_rising_value What: /sys/.../events/in_tempY_raw_thresh_falling_value What: /sys/.../events/in_illuminance0_thresh_falling_value What: /sys/.../events/in_illuminance0_thresh_rising_value What: /sys/.../events/in_proximity0_thresh_falling_value What: /sys/.../events/in_proximity0_thresh_rising_value What: /sys/.../events/in_illuminance_thresh_rising_value What: /sys/.../events/in_illuminance_thresh_falling_value What: /sys/.../events/in_capacitanceY_thresh_rising_value What: /sys/.../events/in_capacitanceY_thresh_falling_value What: /sys/.../events/in_capacitanceY_thresh_adaptive_rising_value What: /sys/.../events/in_capacitanceY_thresh_falling_rising_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the value of threshold that the device is comparing against for the events enabled by Y[_name]_thresh[_rising|falling]_en. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). What: /sys/.../events/in_accel_scale What: /sys/.../events/in_accel_peak_scale What: /sys/.../events/in_anglvel_scale What: /sys/.../events/in_magn_scale What: /sys/.../events/in_rot_from_north_magnetic_scale What: /sys/.../events/in_rot_from_north_true_scale What: /sys/.../events/in_voltage_scale What: /sys/.../events/in_voltage_supply_scale What: /sys/.../events/in_temp_scale What: /sys/.../events/in_illuminance_scale What: /sys/.../events/in_proximity_scale KernelVersion: 3.21 Contact: linux-iio@vger.kernel.org Description: Specifies the conversion factor from the standard units to device specific units used to set the event trigger threshold. What: /sys/.../events/in_accel_x_thresh_rising_hysteresis What: /sys/.../events/in_accel_x_thresh_falling_hysteresis What: /sys/.../events/in_accel_x_thresh_either_hysteresis What: /sys/.../events/in_accel_y_thresh_rising_hysteresis What: /sys/.../events/in_accel_y_thresh_falling_hysteresis What: /sys/.../events/in_accel_y_thresh_either_hysteresis What: /sys/.../events/in_accel_z_thresh_rising_hysteresis What: /sys/.../events/in_accel_z_thresh_falling_hysteresis What: /sys/.../events/in_accel_z_thresh_either_hysteresis What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis What: /sys/.../events/in_magn_x_thresh_rising_hysteresis What: /sys/.../events/in_magn_x_thresh_falling_hysteresis What: /sys/.../events/in_magn_x_thresh_either_hysteresis What: /sys/.../events/in_magn_y_thresh_rising_hysteresis What: /sys/.../events/in_magn_y_thresh_falling_hysteresis What: /sys/.../events/in_magn_y_thresh_either_hysteresis What: /sys/.../events/in_magn_z_thresh_rising_hysteresis What: /sys/.../events/in_magn_z_thresh_falling_hysteresis What: /sys/.../events/in_magn_z_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_voltageY_thresh_rising_hysteresis What: /sys/.../events/in_voltageY_thresh_falling_hysteresis What: /sys/.../events/in_voltageY_thresh_either_hysteresis What: /sys/.../events/in_tempY_thresh_rising_hysteresis What: /sys/.../events/in_tempY_thresh_falling_hysteresis What: /sys/.../events/in_tempY_thresh_either_hysteresis What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis What: /sys/.../events/in_illuminance0_thresh_either_hysteresis What: /sys/.../events/in_proximity0_thresh_falling_hysteresis What: /sys/.../events/in_proximity0_thresh_rising_hysteresis What: /sys/.../events/in_proximity0_thresh_either_hysteresis KernelVersion: 3.13 Contact: linux-iio@vger.kernel.org Description: Specifies the hysteresis of threshold that the device is comparing against for the events enabled by Y[_name]_thresh[_(rising|falling)]_hysteresis. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single hysteresis value applies to both directions. For falling events the hysteresis is added to the _value attribute for this event to get the upper threshold for when the event goes back to normal, for rising events the hysteresis is subtracted from the _value attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event will get activated once in_voltage0_raw goes above 1200 and will become deactivated again once the value falls below 1150. What: /sys/.../events/in_accel_x_raw_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_falling_value What: /sys/.../events/in_accel_y_raw_roc_rising_value What: /sys/.../events/in_accel_y_raw_roc_falling_value What: /sys/.../events/in_accel_z_raw_roc_rising_value What: /sys/.../events/in_accel_z_raw_roc_falling_value What: /sys/.../events/in_anglvel_x_raw_roc_rising_value What: /sys/.../events/in_anglvel_x_raw_roc_falling_value What: /sys/.../events/in_anglvel_y_raw_roc_rising_value What: /sys/.../events/in_anglvel_y_raw_roc_falling_value What: /sys/.../events/in_anglvel_z_raw_roc_rising_value What: /sys/.../events/in_anglvel_z_raw_roc_falling_value What: /sys/.../events/in_magn_x_raw_roc_rising_value What: /sys/.../events/in_magn_x_raw_roc_falling_value What: /sys/.../events/in_magn_y_raw_roc_rising_value What: /sys/.../events/in_magn_y_raw_roc_falling_value What: /sys/.../events/in_magn_z_raw_roc_rising_value What: /sys/.../events/in_magn_z_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value What: /sys/.../events/in_voltageY_raw_roc_rising_value What: /sys/.../events/in_voltageY_raw_roc_falling_value What: /sys/.../events/in_tempY_raw_roc_rising_value What: /sys/.../events/in_tempY_raw_roc_falling_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Specifies the value of rate of change threshold that the device is comparing against for the events enabled by [Y][_name]_roc[_rising|falling]_en. If separate attributes exist for the two directions, but direction is not specified for this attribute, then a single threshold value applies to both directions. The raw or input element of the name indicates whether the value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). What: /sys/.../events/in_accel_x_thresh_rising_period What: /sys/.../events/in_accel_x_thresh_falling_period What: /sys/.../events/in_accel_x_roc_rising_period What: /sys/.../events/in_accel_x_roc_falling_period What: /sys/.../events/in_accel_y_thresh_rising_period What: /sys/.../events/in_accel_y_thresh_falling_period What: /sys/.../events/in_accel_y_roc_rising_period What: /sys/.../events/in_accel_y_roc_falling_period What: /sys/.../events/in_accel_z_thresh_rising_period What: /sys/.../events/in_accel_z_thresh_falling_period What: /sys/.../events/in_accel_z_roc_rising_period What: /sys/.../events/in_accel_z_roc_falling_period What: /sys/.../events/in_anglvel_x_thresh_rising_period What: /sys/.../events/in_anglvel_x_thresh_falling_period What: /sys/.../events/in_anglvel_x_roc_rising_period What: /sys/.../events/in_anglvel_x_roc_falling_period What: /sys/.../events/in_anglvel_y_thresh_rising_period What: /sys/.../events/in_anglvel_y_thresh_falling_period What: /sys/.../events/in_anglvel_y_roc_rising_period What: /sys/.../events/in_anglvel_y_roc_falling_period What: /sys/.../events/in_anglvel_z_thresh_rising_period What: /sys/.../events/in_anglvel_z_thresh_falling_period What: /sys/.../events/in_anglvel_z_roc_rising_period What: /sys/.../events/in_anglvel_z_roc_falling_period What: /sys/.../events/in_magn_x_thresh_rising_period What: /sys/.../events/in_magn_x_thresh_falling_period What: /sys/.../events/in_magn_x_roc_rising_period What: /sys/.../events/in_magn_x_roc_falling_period What: /sys/.../events/in_magn_y_thresh_rising_period What: /sys/.../events/in_magn_y_thresh_falling_period What: /sys/.../events/in_magn_y_roc_rising_period What: /sys/.../events/in_magn_y_roc_falling_period What: /sys/.../events/in_magn_z_thresh_rising_period What: /sys/.../events/in_magn_z_thresh_falling_period What: /sys/.../events/in_magn_z_roc_rising_period What: /sys/.../events/in_magn_z_roc_falling_period What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period What: /sys/.../events/in_rot_from_north_true_thresh_rising_period What: /sys/.../events/in_rot_from_north_true_thresh_falling_period What: /sys/.../events/in_rot_from_north_true_roc_rising_period What: /sys/.../events/in_rot_from_north_true_roc_falling_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period What: /sys/.../events/in_voltageY_supply_thresh_rising_period What: /sys/.../events/in_voltageY_supply_thresh_falling_period What: /sys/.../events/in_voltageY_supply_roc_rising_period What: /sys/.../events/in_voltageY_supply_roc_falling_period What: /sys/.../events/in_voltageY_thresh_rising_period What: /sys/.../events/in_voltageY_thresh_falling_period What: /sys/.../events/in_voltageY_roc_rising_period What: /sys/.../events/in_voltageY_roc_falling_period What: /sys/.../events/in_tempY_thresh_rising_period What: /sys/.../events/in_tempY_thresh_falling_period What: /sys/.../events/in_tempY_roc_rising_period What: /sys/.../events/in_tempY_roc_falling_period What: /sys/.../events/in_accel_x&y&z_mag_falling_period What: /sys/.../events/in_intensity0_thresh_period What: /sys/.../events/in_proximity0_thresh_period What: /sys/.../events/in_activity_still_thresh_rising_period What: /sys/.../events/in_activity_still_thresh_falling_period What: /sys/.../events/in_activity_walking_thresh_rising_period What: /sys/.../events/in_activity_walking_thresh_falling_period What: /sys/.../events/in_activity_jogging_thresh_rising_period What: /sys/.../events/in_activity_jogging_thresh_falling_period What: /sys/.../events/in_activity_running_thresh_rising_period What: /sys/.../events/in_activity_running_thresh_falling_period What: /sys/.../events/in_illuminance_thresh_either_period KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Period of time (in seconds) for which the condition must be met before an event is generated. If direction is not specified then this period applies to both directions. What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: If a low pass filter can be applied to the event generation this property gives its 3db frequency in Hz. A value of zero disables the filter. What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: If a high pass filter can be applied to the event generation this property gives its 3db frequency in Hz. A value of zero disables the filter. What: /sys/.../events/in_activity_still_thresh_rising_en What: /sys/.../events/in_activity_still_thresh_falling_en What: /sys/.../events/in_activity_walking_thresh_rising_en What: /sys/.../events/in_activity_walking_thresh_falling_en What: /sys/.../events/in_activity_jogging_thresh_rising_en What: /sys/.../events/in_activity_jogging_thresh_falling_en What: /sys/.../events/in_activity_running_thresh_rising_en What: /sys/.../events/in_activity_running_thresh_falling_en KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Enables or disables activity events. Depending on direction an event is generated when sensor ENTERS or LEAVES a given state. What: /sys/.../events/in_activity_still_thresh_rising_value What: /sys/.../events/in_activity_still_thresh_falling_value What: /sys/.../events/in_activity_walking_thresh_rising_value What: /sys/.../events/in_activity_walking_thresh_falling_value What: /sys/.../events/in_activity_jogging_thresh_rising_value What: /sys/.../events/in_activity_jogging_thresh_falling_value What: /sys/.../events/in_activity_running_thresh_rising_value What: /sys/.../events/in_activity_running_thresh_falling_value KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Confidence value (in units as percentage) to be used for deciding when an event should be generated. E.g for running: If the confidence value reported by the sensor is greater than in_activity_running_thresh_rising_value then the sensor ENTERS running state. Conversely, if the confidence value reported by the sensor is lower than in_activity_running_thresh_falling_value then the sensor is LEAVING running state. What: /sys/.../iio:deviceX/events/in_accel_mag_en What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: Similar to in_accel_x_thresh[_rising|_falling]_en, but here the magnitude of the channel is compared to the threshold, not its signed value. What: /sys/.../events/in_accel_raw_mag_value What: /sys/.../events/in_accel_x_raw_mag_rising_value What: /sys/.../events/in_accel_y_raw_mag_rising_value What: /sys/.../events/in_accel_z_raw_mag_rising_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: The value to which the magnitude of the channel is compared. If number or direction is not specified, applies to all channels of this type. What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: Similar to in_accel_mag[_y][_rising|_falling]_en, but the event value is relative to a reference magnitude. The reference magnitude includes the graviational acceleration. What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_value What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value KernelVersion: 5.18 Contact: linux-iio@vger.kernel.org Description: The value to which the reference magnitude of the channel is compared. If the axis is not specified, it applies to all channels of this type. What: /sys/.../events/in_steps_change_en KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Event generated when channel passes a threshold on the absolute change in value. E.g. for steps: a step change event is generated each time the user takes N steps, where N is set using in_steps_change_value. What: /sys/.../events/in_steps_change_value KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Specifies the value of change threshold that the device is comparing against for the events enabled by [Y][_name]_roc[_rising|falling|]_en. E.g. for steps: if set to 3, a step change event will be generated every 3 steps. What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org Description: The name of the trigger source being used, as per string given in /sys/class/iio/triggerY/name. What: /sys/bus/iio/devices/iio:deviceX/bufferY/length KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Number of scans contained by the buffer. What: /sys/bus/iio/devices/iio:deviceX/bufferY/enable KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Actually start the buffer capture up. Will start trigger if first device and appropriate. Note that it might be impossible to configure other attributes, (e.g.: events, scale, sampling rate) if they impact the currently active buffer capture session. What: /sys/bus/iio/devices/iio:deviceX/bufferY KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Directory containing interfaces for elements that will be captured for a single triggered sample set in the buffer. Since kernel 5.11 the scan_elements attributes are merged into the bufferY directory, to be configurable per buffer. What: /sys/.../iio:deviceX/bufferY/in_accel_x_en What: /sys/.../iio:deviceX/bufferY/in_accel_y_en What: /sys/.../iio:deviceX/bufferY/in_accel_z_en What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_en What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_en What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_en What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_en What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_en What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_en What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_en What: /sys/.../iio:deviceX/bufferY/in_magn_x_en What: /sys/.../iio:deviceX/bufferY/in_magn_y_en What: /sys/.../iio:deviceX/bufferY/in_magn_z_en What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_en What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_en What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_en What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_en What: /sys/.../iio:deviceX/bufferY/in_timestamp_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_en What: /sys/.../iio:deviceX/bufferY/in_voltageY-voltageZ_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_en What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_en What: /sys/.../iio:deviceX/bufferY/in_voltage_i_en What: /sys/.../iio:deviceX/bufferY/in_voltage_q_en What: /sys/.../iio:deviceX/bufferY/in_incli_x_en What: /sys/.../iio:deviceX/bufferY/in_incli_y_en What: /sys/.../iio:deviceX/bufferY/in_pressureY_en What: /sys/.../iio:deviceX/bufferY/in_pressure_en What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_en What: /sys/.../iio:deviceX/bufferY/in_proximity_en KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Scan element control for triggered data capture. What: /sys/.../iio:deviceX/bufferY/in_accel_type What: /sys/.../iio:deviceX/bufferY/in_deltaangl_type What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_type What: /sys/.../iio:deviceX/bufferY/in_anglvel_type What: /sys/.../iio:deviceX/bufferY/in_magn_type What: /sys/.../iio:deviceX/bufferY/in_incli_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_type What: /sys/.../iio:deviceX/bufferY/in_voltage_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_type What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_type What: /sys/.../iio:deviceX/bufferY/in_voltage_i_type What: /sys/.../iio:deviceX/bufferY/in_voltage_q_type What: /sys/.../iio:deviceX/bufferY/in_timestamp_type What: /sys/.../iio:deviceX/bufferY/in_pressureY_type What: /sys/.../iio:deviceX/bufferY/in_pressure_type What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_type What: /sys/.../iio:deviceX/bufferY/in_proximity_type KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: Description of the scan element data storage within the buffer and hence the form in which it is read from user-space. Form is [be|le]:[s|u]bits/storagebits[>>shift]. be or le specifies big or little endian. s or u specifies if signed (2's complement) or unsigned. bits is the number of bits of data and storagebits is the space (after padding) that it occupies in the buffer. shift if specified, is the shift that needs to be applied prior to masking out unused bits. Some devices put their data in the middle of the transferred elements with additional information on both sides. Note that some devices will have additional information in the unused bits so to get a clean value, the bits value must be used to mask the buffer output value appropriately. The storagebits value also specifies the data alignment. So s48/64>>2 will be a signed 48 bit integer stored in a 64 bit location aligned to a 64 bit boundary. To obtain the clean value, shift right 2 and apply a mask to zero the top 16 bits of the result. For other storage combinations this attribute will be extended appropriately. What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: If the type parameter can take one of a small set of values, this attribute lists them. What: /sys/.../iio:deviceX/bufferY/in_voltageY_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_supply_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_i_index What: /sys/.../iio:deviceX/bufferY/in_voltageY_q_index What: /sys/.../iio:deviceX/bufferY/in_voltage_i_index What: /sys/.../iio:deviceX/bufferY/in_voltage_q_index What: /sys/.../iio:deviceX/bufferY/in_accel_x_index What: /sys/.../iio:deviceX/bufferY/in_accel_y_index What: /sys/.../iio:deviceX/bufferY/in_accel_z_index What: /sys/.../iio:deviceX/bufferY/in_deltaangl_x_index What: /sys/.../iio:deviceX/bufferY/in_deltaangl_y_index What: /sys/.../iio:deviceX/bufferY/in_deltaangl_z_index What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_x_index What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_y_index What: /sys/.../iio:deviceX/bufferY/in_deltavelocity_z_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_x_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_y_index What: /sys/.../iio:deviceX/bufferY/in_anglvel_z_index What: /sys/.../iio:deviceX/bufferY/in_magn_x_index What: /sys/.../iio:deviceX/bufferY/in_magn_y_index What: /sys/.../iio:deviceX/bufferY/in_magn_z_index What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_index What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_index What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_magnetic_tilt_comp_index What: /sys/.../iio:deviceX/bufferY/in_rot_from_north_true_tilt_comp_index What: /sys/.../iio:deviceX/bufferY/in_incli_x_index What: /sys/.../iio:deviceX/bufferY/in_incli_y_index What: /sys/.../iio:deviceX/bufferY/in_timestamp_index What: /sys/.../iio:deviceX/bufferY/in_pressureY_index What: /sys/.../iio:deviceX/bufferY/in_pressure_index What: /sys/.../iio:deviceX/bufferY/in_rot_quaternion_index What: /sys/.../iio:deviceX/bufferY/in_proximity_index KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the position of this scan element in the buffer. Note these are not dependent on what is enabled and may not be contiguous. Thus for user-space to establish the full layout these must be used in conjunction with all _en attributes to establish which channels are present, and the relevant _type attributes to establish the data storage format. What: /sys/.../iio:deviceX/in_activity_still_input What: /sys/.../iio:deviceX/in_activity_walking_input What: /sys/.../iio:deviceX/in_activity_jogging_input What: /sys/.../iio:deviceX/in_activity_running_input KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the confidence for an activity expressed in units as percentage. What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw KernelVersion: 2.6.38 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the amount of quadrature error present in the device at a given time. What: /sys/.../iio:deviceX/in_accelX_power_mode KernelVersion: 3.11 Contact: linux-iio@vger.kernel.org Description: Specifies the chip power mode. low_noise: reduce noise level from ADC, low_power: enable low current consumption. For a list of available output power modes read in_accel_power_mode_available. What: /sys/.../iio:deviceX/in_energy_input What: /sys/.../iio:deviceX/in_energy_raw KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the energy value reported by the device (e.g.: human activity sensors report energy burnt by the user). Units after application of scale are Joules. What: /sys/.../iio:deviceX/in_distance_input What: /sys/.../iio:deviceX/in_distance_raw KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the measured distance to an object or the distance covered by the user since the last reboot while activated. Units after application of scale are meters. What: /sys/bus/iio/devices/iio:deviceX/store_eeprom KernelVersion: 3.4.0 Contact: linux-iio@vger.kernel.org Description: Writing '1' stores the current device configuration into on-chip EEPROM. After power-up or chip reset the device will automatically load the saved configuration. What: /sys/.../iio:deviceX/in_proximity_raw What: /sys/.../iio:deviceX/in_proximity_input What: /sys/.../iio:deviceX/in_proximityY_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Proximity measurement indicating that some object is near the sensor, usually by observing reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements indicate closer objects, and vice versa. Units after application of scale and offset are meters. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw What: /sys/.../iio:deviceX/in_illuminanceY_input What: /sys/.../iio:deviceX/in_illuminanceY_raw What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw What: /sys/.../iio:deviceX/in_illuminance_ir_raw What: /sys/.../iio:deviceX/in_illuminance_clear_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Illuminance measurement, units after application of scale and offset are lux. What: /sys/.../iio:deviceX/in_intensityY_raw What: /sys/.../iio:deviceX/in_intensityY_ir_raw What: /sys/.../iio:deviceX/in_intensityY_both_raw What: /sys/.../iio:deviceX/in_intensityY_uv_raw What: /sys/.../iio:deviceX/in_intensityY_uva_raw What: /sys/.../iio:deviceX/in_intensityY_uvb_raw What: /sys/.../iio:deviceX/in_intensityY_duv_raw KernelVersion: 3.4 Contact: linux-iio@vger.kernel.org Description: Unit-less light intensity. Modifiers both and ir indicate that measurements contain visible and infrared light components or just infrared light, respectively. Modifier uv indicates that measurements contain ultraviolet light components. Modifiers uva, uvb and duv indicate that measurements contain A, B or deep (C) ultraviolet light components respectively. What: /sys/.../iio:deviceX/in_uvindex_input KernelVersion: 4.6 Contact: linux-iio@vger.kernel.org Description: UV light intensity index measuring the human skin's response to different wavelength of sunlight weighted according to the standardised CIE Erythemal Action Spectrum. UV index values range from 0 (low) to >=11 (extreme). What: /sys/.../iio:deviceX/in_intensity_integration_time What: /sys/.../iio:deviceX/in_intensity_red_integration_time What: /sys/.../iio:deviceX/in_intensity_green_integration_time What: /sys/.../iio:deviceX/in_intensity_blue_integration_time What: /sys/.../iio:deviceX/in_intensity_clear_integration_time What: /sys/.../iio:deviceX/in_illuminance_integration_time KernelVersion: 3.12 Contact: linux-iio@vger.kernel.org Description: This attribute is used to get/set the integration time in seconds. If shared across all channels of a given type, _integration_time is used. What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Number of seconds in which to compute speed. What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw KernelVersion: 3.15 Contact: linux-iio@vger.kernel.org Description: Raw value of quaternion components using a format x y z w. Here x, y, and z component represents the axis about which a rotation will occur and w component represents the amount of rotation. What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw KernelVersion: 3.15 Contact: linux-iio@vger.kernel.org Description: Raw value of rotation from true/magnetic north measured with or without compensation from tilt sensors. What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw KernelVersion: 3.18 Contact: linux-iio@vger.kernel.org Description: Raw current measurement from channel X. Units are in milliamps after application of scale and offset. If no offset or scale is present, output should be considered as processed with the unit in milliamps. Channels with 'i' and 'q' modifiers always exist in pairs and both channels refer to the same signal. The 'i' channel contains the in-phase component of the signal while the 'q' channel contains the quadrature component. What: /sys/.../iio:deviceX/in_energy_en What: /sys/.../iio:deviceX/in_distance_en What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en What: /sys/.../iio:deviceX/in_steps_en KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: Activates a device feature that runs in firmware/hardware. E.g. for steps: the pedometer saves power while not used; when activated, it will count the steps taken by the user in firmware and export them through in_steps_input. What: /sys/.../iio:deviceX/in_steps_input KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the number of steps taken by the user since the last reboot while activated. What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw KernelVersion: 3.19 Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the current speed value of the user (which is the norm or magnitude of the velocity vector). Units after application of scale are m/s. What: /sys/.../iio:deviceX/in_steps_debounce_count KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Specifies the number of steps that must occur within in_steps_filter_debounce_time for the pedometer to decide the consumer is making steps. What: /sys/.../iio:deviceX/in_steps_debounce_time KernelVersion: 4.0 Contact: linux-iio@vger.kernel.org Description: Specifies number of seconds in which we compute the steps that occur in order to decide if the consumer is making steps. What: /sys/bus/iio/devices/iio:deviceX/bufferY/watermark KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the maximum number of scan elements to wait for. Poll will block until the watermark is reached. Blocking read will wait until the minimum between the requested read amount or the low water mark is available. Non-blocking read will retrieve the available samples from the buffer even if there are less samples then watermark level. This allows the application to block on poll with a timeout and read the available samples after the timeout expires and thus have a maximum delay guarantee. What: /sys/bus/iio/devices/iio:deviceX/bufferY/data_available KernelVersion: 5.11 Contact: linux-iio@vger.kernel.org Description: A read-only value indicating the bytes of data available in the buffer. In the case of an output buffer, this indicates the amount of empty space available to write data to. In the case of an input buffer, this indicates the amount of data available for reading. What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: A read-only boolean value that indicates if the hardware fifo is currently enabled or disabled. If the device does not have a hardware fifo this entry is not present. The hardware fifo is enabled when the buffer is enabled if the current hardware fifo watermark level is set and other current device settings allows it (e.g. if a trigger is set that samples data differently that the hardware fifo does then hardware fifo will not enabled). If the hardware fifo is enabled and the level of the hardware fifo reaches the hardware fifo watermark level the device will flush its hardware fifo to the device buffer. Doing a non blocking read on the device when no samples are present in the device buffer will also force a flush. When the hardware fifo is enabled there is no need to use a trigger to use buffer mode since the watermark settings guarantees that the hardware fifo is flushed to the device buffer. What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout KernelVersion: 4.12 Contact: linux-iio@vger.kernel.org Description: A read/write property to provide capability to delay reporting of samples till a timeout is reached. This allows host processors to sleep, while the sensor is storing samples in its internal fifo. The maximum timeout in seconds can be specified by setting hwfifo_timeout.The current delay can be read by reading hwfifo_timeout. A value of 0 means that there is no timeout. What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: Read-only entry that contains a single integer specifying the current watermark level for the hardware fifo. If the device does not have a hardware fifo this entry is not present. The watermark level for the hardware fifo is set by the driver based on the value set by the user in buffer/watermark but taking into account hardware limitations (e.g. most hardware buffers are limited to 32-64 samples, some hardware buffers watermarks are fixed or have minimum levels). A value of 0 means that the hardware watermark is unset. What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the minimum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. If the user sets buffer/watermark to a value less than this one, then the hardware watermark will remain unset. What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: A single positive integer specifying the maximum watermark level for the hardware fifo of this device. If the device does not have a hardware fifo this entry is not present. If the user sets buffer/watermark to a value greater than this one, then the hardware watermark will be capped at this value. What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: A list of positive integers specifying the available watermark levels for the hardware fifo. This entry is optional and if it is not present it means that all the values between hwfifo_watermark_min and hwfifo_watermark_max are supported. If the user sets buffer/watermark to a value greater than hwfifo_watermak_min but not equal to any of the values in this list, the driver will chose an appropriate value for the hardware fifo watermark level. What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity KernelVersion: 4.1 Contact: linux-iio@vger.kernel.org Description: The emissivity ratio of the surface in the field of view of the contactless temperature sensor. Emissivity varies from 0 to 1, with 1 being the emissivity of a black body. What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio KernelVersion: 4.2 Contact: linux-iio@vger.kernel.org Description: Hardware applied number of measurements for acquiring one data point. The HW will do [_name]_oversampling_ratio measurements and return the average value as output data. Each value resulted from [_name]_oversampling_ratio measurements is considered as one sample for [_name]_sampling_frequency. What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw KernelVersion: 4.3 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) reading of a substance. Units after application of scale and offset are percents. What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw KernelVersion: 4.3 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) resistance reading. Units after application of scale and offset are ohms. What: /sys/bus/iio/devices/iio:deviceX/heater_enable KernelVersion: 4.1.0 Contact: linux-iio@vger.kernel.org Description: '1' (enable) or '0' (disable) specifying the enable of heater function. Same reading values apply. This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw KernelVersion: 4.5 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) pH reading of a substance as a negative base-10 logarithm of hydrodium ions in a litre of water. What: /sys/bus/iio/devices/iio:deviceX/mount_matrix What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix KernelVersion: 4.6 Contact: linux-iio@vger.kernel.org Description: Mounting matrix for IIO sensors. This is a rotation matrix which informs userspace about sensor chip's placement relative to the main hardware it is mounted on. Main hardware placement is defined according to the local reference frame related to the physical quantity the sensor measures. Given that the rotation matrix is defined in a board specific way (platform data and / or device-tree), the main hardware reference frame definition is left to the implementor's choice (see below for a magnetometer example). Applications should apply this rotation matrix to samples so that when main hardware reference frame is aligned onto local reference frame, then sensor chip reference frame is also perfectly aligned with it. Matrix is a 3x3 unitary matrix and typically looks like [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware are perfectly aligned with each other. For example, a mounting matrix for a magnetometer sensor informs userspace about sensor chip's ORIENTATION relative to the main hardware. More specifically, main hardware orientation is defined with respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : * Y is in the ground plane and positive towards magnetic North ; * X is in the ground plane, perpendicular to the North axis and positive towards the East ; * Z is perpendicular to the ground plane and positive upwards. An implementor might consider that for a hand-held device, a 'natural' orientation would be 'front facing camera at the top'. The main hardware reference frame could then be described as : * Y is in the plane of the screen and is positive towards the top of the screen ; * X is in the plane of the screen, perpendicular to Y axis, and positive towards the right hand side of the screen ; * Z is perpendicular to the screen plane and positive out of the screen. Another example for a quadrotor UAV might be : * Y is in the plane of the propellers and positive towards the front-view camera; * X is in the plane of the propellers, perpendicular to Y axis, and positive towards the starboard side of the UAV ; * Z is perpendicular to propellers plane and positive upwards. What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw KernelVersion: 4.8 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled no offset etc.) electric conductivity reading. Units after application of scale and offset are siemens per meter. What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: This interface is deprecated; please use the Counter subsystem. Raw counter device counts from channel Y. For quadrature counters, multiplication by an available [Y]_scale results in the counts of a single quadrature signal phase from channel Y. What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw KernelVersion: 4.10 Contact: linux-iio@vger.kernel.org Description: This interface is deprecated; please use the Counter subsystem. Raw counter device index value from channel Y. This attribute provides an absolute positional reference (e.g. a pulse once per revolution) which may be used to home positional systems as required. What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available KernelVersion: 4.12 Contact: linux-iio@vger.kernel.org Description: This interface is deprecated; please use the Counter subsystem. A list of possible counting directions which are: - "up" : counter device is increasing. - "down": counter device is decreasing. What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction KernelVersion: 4.12 Contact: linux-iio@vger.kernel.org Description: This interface is deprecated; please use the Counter subsystem. Raw counter device counters direction for channel Y. What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_label What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_label KernelVersion: 5.8 Contact: linux-iio@vger.kernel.org Description: Optional symbolic label to a device channel. If a label is defined for this channel add that to the channel specific attributes. This is useful for userspace to be able to better identify an individual channel. What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw KernelVersion: 4.18 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled) phase difference reading from channel Y. Units after application of scale and offset are radians. What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input KernelVersion: 4.22 Contact: linux-iio@vger.kernel.org Description: Mass concentration reading of particulate matter in ug / m3. pmX consists of particles with aerodynamic diameter less or equal to X micrometers. What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available Date: November 2019 KernelVersion: 5.4 Contact: linux-iio@vger.kernel.org Description: List of valid periods (in seconds) for which the light intensity must be above the threshold level before interrupt is asserted. What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency KernelVersion: 5.5 Contact: linux-iio@vger.kernel.org Description: Center frequency in Hz for a notch filter. Used i.e. for line noise suppression. What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type KernelVersion: 5.5 Contact: linux-iio@vger.kernel.org Description: One of the following thermocouple types: B, E, J, K, N, R, S, T. What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient KernelVersion: 5.10 Contact: linux-iio@vger.kernel.org Description: Calibrated ambient temperature for object temperature calculation in milli degrees Celsius. What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw KernelVersion: 5.10 Contact: linux-iio@vger.kernel.org Description: Unscaled light intensity according to CIE 1931/DIN 5033 color space. Units after application of scale are nano nanowatts per square meter. What: /sys/bus/iio/devices/iio:deviceX/in_anglY_label KernelVersion: 5.12 Contact: linux-iio@vger.kernel.org Description: Optional symbolic label for channel Y. For Intel hid hinge sensor, the label values are: hinge, keyboard, screen. It means the three channels each correspond respectively to hinge angle, keyboard angle, and screen angle. What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_hysteresis_relative What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hysteresis_relative KernelVersion: 5.12 Contact: linux-iio@vger.kernel.org Description: Specify the percent for light sensor relative to the channel absolute value that a data field should change before an event is generated. Units are a percentage of the prior reading. What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable Date: June 2020 KernelVersion: 5.8 Contact: linux-iio@vger.kernel.org Description: Some sensors have the ability to apply auto calibration at runtime. For example, it may be necessary to compensate for contaminant build-up in a measurement chamber or optical element deterioration that would otherwise lead to sensor drift. Writing 1 or 0 to this attribute will respectively activate or deactivate this auto calibration function. Upon reading, the current status is returned. What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value Date: June 2020 KernelVersion: 5.8 Contact: linux-iio@vger.kernel.org Description: Some sensors have the ability to apply a manual calibration using a known measurement value, perhaps obtained from an external reference device. Writing a value to this function will force such a calibration change. For the scd30 the value should be from the range [400 1 2000]. Note for the scd30 that a valid value may only be obtained once it is has been written. Until then any read back of this value should be ignored. As for the scd4x an error will be returned immediately if the manual calibration has failed. What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value_available KernelVersion: 5.15 Contact: linux-iio@vger.kernel.org Description: Available range for the forced calibration value, expressed as: - a range specified as "[min step max]" What: /sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency What: /sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency KernelVersion: 5.20 Contact: linux-iio@vger.kernel.org Description: Some devices have separate controls of sampling frequency for individual channels. If multiple channels are enabled in a scan, then the sampling_frequency of the scan may be computed from the per channel sampling frequencies. What: /sys/.../events/in_accel_gesture_singletap_en What: /sys/.../events/in_accel_gesture_doubletap_en KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Device generates an event on a single or double tap. What: /sys/.../events/in_accel_gesture_singletap_value What: /sys/.../events/in_accel_gesture_doubletap_value KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Specifies the threshold value that the device is comparing against to generate the tap gesture event. The lower threshold value increases the sensitivity of tap detection. Units and the exact meaning of value are device-specific. What: /sys/.../events/in_accel_gesture_tap_value_available KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Lists all available threshold values which can be used to modify the sensitivity of the tap detection. What: /sys/.../events/in_accel_gesture_singletap_reset_timeout What: /sys/.../events/in_accel_gesture_doubletap_reset_timeout KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Specifies the timeout value in seconds for the tap detector to not to look for another tap event after the event as occurred. Basically the minimum quiet time between the two single-tap's or two double-tap's. What: /sys/.../events/in_accel_gesture_tap_reset_timeout_available KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Lists all available tap reset timeout values. Units in seconds. What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Specifies the minimum quiet time in seconds between the two taps of a double tap. What: /sys/.../events/in_accel_gesture_doubletap_tap2_min_delay_available KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Lists all available delay values between two taps in the double tap. Units in seconds. What: /sys/.../events/in_accel_gesture_tap_maxtomin_time KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Specifies the maximum time difference allowed between upper and lower peak of tap to consider it as the valid tap event. Units in seconds. What: /sys/.../events/in_accel_gesture_tap_maxtomin_time_available KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Lists all available time values between upper peak to lower peak. Units in seconds. What: /sys/bus/iio/devices/iio:deviceX/in_rot_yaw_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_pitch_raw What: /sys/bus/iio/devices/iio:deviceX/in_rot_roll_raw KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Raw (unscaled) euler angles readings. Units after application of scale are deg. What: /sys/bus/iio/devices/iio:deviceX/serialnumber KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: An example format is 16-bytes, 2-digits-per-byte, HEX-string representing the sensor unique ID number. What: /sys/bus/iio/devices/iio:deviceX/filter_type_available What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available KernelVersion: 6.1 Contact: linux-iio@vger.kernel.org Description: Reading returns a list with the possible filter modes. Options for the attribute: * "sinc3" - The digital sinc3 filter. Moderate 1st conversion time. Good noise performance. * "sinc4" - Sinc 4. Excellent noise performance. Long 1st conversion time. * "sinc5" - The digital sinc5 filter. Excellent noise performance * "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion time. * "sinc3+rej60" - Sinc3 + 60Hz rejection. * "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion time. * "sinc3+pf1" - Sinc3 + device specific Post Filter 1. * "sinc3+pf2" - Sinc3 + device specific Post Filter 2. * "sinc3+pf3" - Sinc3 + device specific Post Filter 3. * "sinc3+pf4" - Sinc3 + device specific Post Filter 4. What: /sys/.../events/in_proximity_thresh_either_runningperiod KernelVersion: 6.6 Contact: linux-iio@vger.kernel.org Description: A running period of time (in seconds) for which in_proximity_thresh_either_runningcount amount of conditions must occur before an event is generated. If direction is not specified then this period applies to both directions. What: /sys/.../events/in_proximity_thresh_either_runningcount KernelVersion: 6.6 Contact: linux-iio@vger.kernel.org Description: Number of conditions that must occur, during a running period, before an event is generated. What: /sys/bus/iio/devices/iio:deviceX/in_colortemp_raw KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: Represents light color temperature, which measures light color temperature in Kelvin. What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_chromaticity_y_raw KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: The x and y light color coordinate on the CIE 1931 chromaticity diagram. What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_either_label What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_mag_rising_label What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_falling_label What: /sys/bus/iio/devices/iio:deviceX/events/in_altvoltageY_thresh_rising_label What: /sys/bus/iio/devices/iio:deviceX/events/in_anglvelY_mag_rising_label What: /sys/bus/iio/devices/iio:deviceX/events/in_anglY_thresh_rising_label What: /sys/bus/iio/devices/iio:deviceX/events/in_phaseY_mag_rising_label KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: Optional symbolic label to a device channel event. If a label is defined for this event add that to the event specific attributes. This is useful for userspace to be able to better identify an individual event. What: /sys/.../events/in_accel_gesture_tap_wait_timeout KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: Enable tap gesture confirmation with timeout. What: /sys/.../events/in_accel_gesture_tap_wait_dur KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: Timeout value in seconds for tap gesture confirmation. What: /sys/.../events/in_accel_gesture_tap_wait_dur_available KernelVersion: 6.7 Contact: linux-iio@vger.kernel.org Description: List of available timeout value for tap gesture confirmation. What: /sys/.../iio:deviceX/in_shunt_resistor What: /sys/.../iio:deviceX/in_current_shunt_resistor What: /sys/.../iio:deviceX/in_power_shunt_resistor KernelVersion: 6.10 Contact: linux-iio@vger.kernel.org Description: The value of current sense resistor in Ohms. What: /sys/.../iio:deviceX/in_attention_input KernelVersion: 6.13 Contact: linux-iio@vger.kernel.org Description: Value representing the user's attention to the system expressed in units as percentage. This usually means if the user is looking at the screen or not.