# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/display/panel/sitronix,st7701.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sitronix ST7701 based LCD panels maintainers: - Jagan Teki description: | ST7701 designed for small and medium sizes of TFT LCD display, is capable of supporting up to 480RGBX864 in resolution. It provides several system interfaces like MIPI/RGB/SPI. Techstar TS8550B is 480x854, 2-lane MIPI DSI LCD panel which has inbuilt ST7701 chip. Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel which has built-in ST7701 chip. properties: compatible: items: - enum: - anbernic,rg-arc-panel - anbernic,rg28xx-panel - densitron,dmt028vghmcmi-1a - elida,kd50t048a - techstar,ts8550b - const: sitronix,st7701 reg: description: DSI / SPI channel used by that screen maxItems: 1 VCC-supply: description: analog regulator for MIPI circuit IOVCC-supply: description: I/O system regulator dc-gpios: maxItems: 1 description: Controller data/command selection (D/CX) in 4-line SPI mode. If not set, the controller is in 3-line SPI mode. Disallowed for DSI. port: true reset-gpios: true rotation: true backlight: true required: - compatible - reg - VCC-supply - IOVCC-supply - port - reset-gpios allOf: - $ref: panel-common.yaml# - if: properties: compatible: contains: # SPI connected panels enum: - anbernic,rg28xx-panel then: $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: not: contains: # DSI or SPI without D/CX pin enum: - anbernic,rg-arc-panel - anbernic,rg28xx-panel - densitron,dmt028vghmcmi-1a - elida,kd50t048a - techstar,ts8550b then: required: - dc-gpios else: properties: dc-gpios: false unevaluatedProperties: false examples: - | #include dsi { #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "techstar,ts8550b", "sitronix,st7701"; reg = <0>; VCC-supply = <®_dldo2>; IOVCC-supply = <®_dldo2>; reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ backlight = <&backlight>; port { mipi_in_panel: endpoint { remote-endpoint = <&mipi_out_panel>; }; }; }; }; - | #include spi { #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "anbernic,rg28xx-panel", "sitronix,st7701"; reg = <0>; spi-max-frequency = <3125000>; VCC-supply = <®_lcd>; IOVCC-supply = <®_lcd>; reset-gpios = <&pio 8 14 GPIO_ACTIVE_HIGH>; /* LCD-RST: PI14 */ backlight = <&backlight>; port { panel_in_rgb: endpoint { remote-endpoint = <&tcon_lcd0_out_lcd>; }; }; }; };