// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. */ /dts-v1/; #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/input/input.h" #include #include "dt-bindings/usb/pd.h" #include "rk3399.dtsi" / { model = "Orange Pi RK3399 Board"; compatible = "xunlong,rk3399-orangepi", "rockchip,rk3399"; aliases { ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; }; chosen { stdout-path = "serial2:1500000n8"; }; clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; adc-keys { compatible = "adc-keys"; io-channels = <&saradc 1>; io-channel-names = "buttons"; keyup-threshold-microvolt = <1800000>; poll-interval = <100>; button-up { label = "Volume Up"; linux,code = ; press-threshold-microvolt = <100000>; }; button-down { label = "Volume Down"; linux,code = ; press-threshold-microvolt = <300000>; }; button-back { label = "Back"; linux,code = ; press-threshold-microvolt = <985000>; }; button-menu { label = "Menu"; linux,code = ; press-threshold-microvolt = <1314000>; }; }; dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; keys: gpio-keys { compatible = "gpio-keys"; autorepeat; key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = ; linux,input-type = <1>; pinctrl-names = "default"; pinctrl-0 = <&pwr_btn>; wakeup-source; }; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_reg_on_h>; reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: regulator-vcc1v8-s3 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_1v8>; }; vcc3v0_sd: regulator-vcc3v0-sd { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_pwr_h>; regulator-boot-on; regulator-max-microvolt = <3000000>; regulator-min-microvolt = <3000000>; regulator-name = "vcc3v0_sd"; vin-supply = <&vcc3v3_sys>; }; vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sys>; }; vcc5v0_host: regulator-vcc5v0-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; regulator-always-on; vin-supply = <&vcc_sys>; }; vbus_typec: regulator-vbus-typec { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_typec_en>; regulator-name = "vbus_typec"; vin-supply = <&vcc_sys>; }; vcc_sys: regulator-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; pwm-supply = <&vcc_sys>; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; }; }; &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_l>; }; &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_b>; }; &emmc_phy { status = "okay"; }; &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; phy-supply = <&vcc3v3_s3>; phy-mode = "rgmii"; phy-handle = <&rtl8211e>; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; rtl8211e: ethernet-phy@1 { reg = <1>; interrupt-parent = <&gpio3>; interrupts = ; reset-assert-us = <10000>; reset-deassert-us = <30000>; reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c3>; status = "okay"; }; &hdmi_sound { status = "okay"; }; &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; i2c-scl-falling-time-ns = <4>; status = "okay"; rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio1>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "rtc_clko_soc", "rtc_clko_wifi"; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; system-power-controller; wakeup-source; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; vcc10-supply = <&vcc3v3_sys>; vcc11-supply = <&vcc3v3_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_3v0>; regulators { vdd_center: DCDC_REG1 { regulator-name = "vdd_center"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_l: DCDC_REG2 { regulator-name = "vdd_cpu_l"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { regulator-name = "vcc_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc1v8_dvp: LDO_REG1 { regulator-name = "vcc1v8_dvp"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v0_tp: LDO_REG2 { regulator-name = "vcc3v0_tp"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmupll: LDO_REG3 { regulator-name = "vcc1v8_pmupll"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <2500000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcca3v0_codec: LDO_REG5 { regulator-name = "vcca3v0_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v5: LDO_REG6 { regulator-name = "vcc_1v5"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <2500000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1500000>; }; }; vcca1v8_codec: LDO_REG7 { regulator-name = "vcca1v8_codec"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <2500000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v0: LDO_REG8 { regulator-name = "vcc_3v0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3400000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc3v3_s3: SWITCH_REG1 { regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; vdd_cpu_b: regulator@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; pinctrl-0 = <&cpu_b_sleep>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: regulator@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpu_sleep>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c1 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; status = "okay"; }; &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; status = "okay"; }; &i2c4 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; status = "okay"; ak09911@c { compatible = "asahi-kasei,ak09911"; reg = <0x0c>; vdd-supply = <&vcc3v3_s3>; vid-supply = <&vcc3v3_s3>; }; mpu6500@68 { compatible = "invensense,mpu6500"; reg = <0x68>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&gsensor_int_l>; vddio-supply = <&vcc3v3_s3>; }; lsm6ds3@6a { compatible = "st,lsm6ds3"; reg = <0x6a>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&gyr_int_l>; vdd-supply = <&vcc3v3_s3>; vddio-supply = <&vcc3v3_s3>; }; cm32181@10 { compatible = "capella,cm32181"; reg = <0x10>; interrupt-parent = <&gpio4>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&light_int_l>; vdd-supply = <&vcc3v3_s3>; }; fusb302@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&chg_cc_int_l>; vbus-supply = <&vbus_typec>; typec_con: connector { compatible = "usb-c-connector"; data-role = "host"; label = "USB-C"; op-sink-microwatt = <1000000>; power-role = "dual"; sink-pdos = ; source-pdos = ; try-power-role = "sink"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; typec_hs: endpoint { remote-endpoint = <&u2phy0_typec_hs>; }; }; port@1 { reg = <1>; typec_ss: endpoint { remote-endpoint = <&tcphy0_typec_ss>; }; }; port@2 { reg = <2>; typec_dp: endpoint { remote-endpoint = <&tcphy0_typec_dp>; }; }; }; }; }; }; &io_domains { status = "okay"; bt656-supply = <&vcc_3v0>; audio-supply = <&vcca1v8_codec>; sdmmc-supply = <&vcc_sdio>; gpio1830-supply = <&vcc_3v0>; }; &pmu_io_domains { status = "okay"; pmu1830-supply = <&vcc_3v0>; }; &pinctrl { buttons { pwr_btn: pwr-btn { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; gmac { phy_intb: phy-intb { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; phy_rstb: phy-rstb { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { cpu_b_sleep: cpu-b-sleep { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; gpu_sleep: gpu-sleep { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sd { sdmmc0_pwr_h: sdmmc0-pwr-h { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb2 { vcc5v0_host_en: vcc5v0-host-en { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_typec_en: vcc5v0-typec-en { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_reg_on_h: wifi-reg-on-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wifi { wifi_host_wake_l: wifi-host-wake-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; bluetooth { bt_reg_on_h: bt-enable-h { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_wake_l: bt-wake-l { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; mpu6500 { gsensor_int_l: gsensor-int-l { rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; lsm6ds3 { gyr_int_l: gyr-int-l { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; cm32181 { light_int_l: light-int-l { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; fusb302 { chg_cc_int_l: chg-cc-int-l { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; &pwm0 { status = "okay"; }; &pwm2 { status = "okay"; }; &saradc { vref-supply = <&vcca1v8_s3>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; non-removable; status = "okay"; }; &sdio0 { bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; clock-frequency = <50000000>; disable-wp; keep-power-in-suspend; max-frequency = <50000000>; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; #address-cells = <1>; #size-cells = <0>; status = "okay"; brcmf: wifi@1 { reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; }; }; &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; clock-frequency = <150000000>; disable-wp; max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v0_sd>; vqmmc-supply = <&vcc_sdio>; status = "okay"; }; &tcphy0 { status = "okay"; }; &tcphy0_dp { port { tcphy0_typec_dp: endpoint { remote-endpoint = <&typec_dp>; }; }; }; &tcphy0_usb3 { port { tcphy0_typec_ss: endpoint { remote-endpoint = <&typec_ss>; }; }; }; &tcphy1 { status = "okay"; }; &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; status = "okay"; }; &u2phy0 { status = "okay"; u2phy0_otg: otg-port { phy-supply = <&vbus_typec>; status = "okay"; }; u2phy0_host: host-port { phy-supply = <&vcc5v0_host>; status = "okay"; }; port { u2phy0_typec_hs: endpoint { remote-endpoint = <&typec_hs>; }; }; }; &u2phy1 { status = "okay"; u2phy1_otg: otg-port { status = "okay"; }; u2phy1_host: host-port { phy-supply = <&vcc5v0_host>; status = "okay"; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay"; bluetooth { compatible = "brcm,bcm43438-bt"; clocks = <&rk808 1>; clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; vbat-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; }; }; &uart2 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd3_0 { status = "okay"; }; &usbdrd_dwc3_0 { status = "okay"; dr_mode = "host"; }; &usbdrd3_1 { status = "okay"; }; &usbdrd_dwc3_1 { status = "okay"; dr_mode = "host"; }; &vopb { status = "okay"; }; &vopb_mmu { status = "okay"; }; &vopl { status = "okay"; }; &vopl_mmu { status = "okay"; };