// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd. */ /dts-v1/; #include #include #include #include #include "rk3588s.dtsi" / { model = "Radxa ROCK 5C"; compatible = "radxa,rock-5c", "rockchip,rk3588s"; aliases { ethernet0 = &gmac1; mmc0 = &sdhci; mmc1 = &sdmmc; }; chosen { stdout-path = "serial2:1500000n8"; }; analog-sound { compatible = "audio-graph-card"; label = "rk3588-es8316"; dais = <&i2s0_8ch_p0>; routing = "MIC2", "Mic Jack", "Headphones", "HPOL", "Headphones", "HPOR"; widgets = "Microphone", "Mic Jack", "Headphone", "Headphones"; }; hdmi0-con { compatible = "hdmi-connector"; type = "a"; port { hdmi0_con_in: endpoint { remote-endpoint = <&hdmi0_out_con>; }; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_pins>; led-0 { color = ; default-state = "on"; function = LED_FUNCTION_POWER; gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; }; led-1 { color = ; default-state = "on"; function = LED_FUNCTION_HEARTBEAT; gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; }; fan { compatible = "pwm-fan"; #cooling-cells = <2>; cooling-levels = <0 64 128 192 255>; fan-supply = <&vcc_5v0>; pwms = <&pwm3 0 10000 0>; }; pcie2x1l2_3v3: regulator-pcie2x1l2-3v3 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pow_en>; regulator-name = "pcie2x1l2_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_sysin>; }; vcc5v_dcin: regulator-vcc5v-dcin { compatible = "regulator-fixed"; regulator-name = "vcc5v_dcin"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; vcc5v0_usb_host: regulator-vcc5v0-usb-host { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_host_pwren_h>; regulator-name = "vcc5v0_usb_host"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc_sysin>; }; vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_otg_pwren_h>; regulator-name = "vcc5v0_usb_otg0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc_sysin>; }; vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 { compatible = "regulator-fixed"; regulator-name = "vcc_1v1_nldo_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; vin-supply = <&vcc_sysin>; }; vcc_3v3_pmu: regulator-vcc-3v3-pmu { compatible = "regulator-fixed"; regulator-name = "vcc_3v3_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3_s3>; }; vcc_3v3_s0: regulator-vcc-3v3-s0 { compatible = "regulator-fixed"; regulator-name = "vcc_3v3_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_1v8_s0>; }; vcc_5v0: regulator-vcc-5v0 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc_5v0_pwren_h>; regulator-name = "vcc_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc_sysin>; }; vcc_sysin: regulator-vcc-sysin { compatible = "regulator-fixed"; regulator-name = "vcc_sysin"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v_dcin>; }; vcca: regulator-vcca { compatible = "regulator-fixed"; regulator-name = "vcca"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <4000000>; regulator-max-microvolt = <4000000>; vin-supply = <&vcc_sysin>; }; vdd_3v3: regulator-vdd-3v3 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_wifi_pwr>; regulator-name = "vdd_3v3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc_3v3_s3>; }; }; &combphy0_ps { status = "okay"; }; &combphy2_psu { status = "okay"; }; &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_big0_s0>; }; &cpu_b2 { cpu-supply = <&vdd_cpu_big1_s0>; }; &cpu_b3 { cpu-supply = <&vdd_cpu_big1_s0>; }; &cpu_l0 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_lit_s0>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_lit_s0>; }; &gmac1 { phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-id"; phy-supply = <&vcc_3v3_s0>; pinctrl-0 = <&gmac1_miim &gmac1_tx_bus2 &gmac1_rx_bus2 &gmac1_rgmii_clk &gmac1_rgmii_bus &gmac1_clkinout>; pinctrl-names = "default"; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu_s0>; status = "okay"; }; &hdmi0 { pinctrl-names = "default"; pinctrl-0 = <&hdmim0_tx0_cec &hdmim1_tx0_hpd &hdmim0_tx0_scl &hdmim0_tx0_sda>; status = "okay"; }; &hdmi0_in { hdmi0_in_vp0: endpoint { remote-endpoint = <&vp0_out_hdmi0>; }; }; &hdmi0_out { hdmi0_out_con: endpoint { remote-endpoint = <&hdmi0_con_in>; }; }; &hdptxphy_hdmi0 { status = "okay"; }; &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0m2_xfer>; status = "okay"; vdd_cpu_big0_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_big0_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc_sysin>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_big1_s0: regulator@43 { compatible = "rockchip,rk8603", "rockchip,rk8602"; reg = <0x43>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_big1_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <1050000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc_sysin>; regulator-state-mem { regulator-off-in-suspend; }; }; eeprom@50 { compatible = "belling,bl24c16a", "atmel,24c16"; reg = <0x50>; pagesize = <16>; vcc-supply = <&vcc_3v3_pmu>; }; }; &i2c2 { status = "okay"; vdd_npu_s0: regulator@42 { compatible = "rockchip,rk8602"; reg = <0x42>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_npu_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc_sysin>; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c5 { pinctrl-names = "default"; pinctrl-0 = <&i2c5m2_xfer>; status = "okay"; rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; clock-output-names = "rtcic_32kout"; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&rtc_int_l>; }; }; &i2c7 { status = "okay"; audio-codec@11 { compatible = "everest,es8316"; reg = <0x11>; assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; assigned-clock-rates = <12288000>; clocks = <&cru I2S0_8CH_MCLKOUT>; clock-names = "mclk"; #sound-dai-cells = <0>; port { es8316_p0_0: endpoint { remote-endpoint = <&i2s0_8ch_p0_0>; }; }; }; }; &i2s0_8ch { pinctrl-names = "default"; pinctrl-0 = <&i2s0_lrck &i2s0_mclk &i2s0_sclk &i2s0_sdi0 &i2s0_sdo0>; status = "okay"; i2s0_8ch_p0: port { i2s0_8ch_p0_0: endpoint { dai-format = "i2s"; mclk-fs = <256>; remote-endpoint = <&es8316_p0_0>; }; }; }; &mdio1 { rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-id001c.c916"; reg = <1>; pinctrl-names = "default"; pinctrl-0 = <&gmac1_rstn>; reset-assert-us = <20000>; reset-deassert-us = <100000>; reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; }; }; &pcie2x1l2 { pinctrl-names = "default"; pinctrl-0 = <&pcie20x1_2_perstn_m0>; reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&pcie2x1l2_3v3>; status = "okay"; }; &pinctrl { leds { led_pins: led-pins { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; mdio { gmac1_rstn: gmac1-rstn { rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pcie { pcie20x1_2_perstn_m0: pcie20x1-2-perstn-m0 { rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; pow_en: pow-en { rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; rtc { rtc_int_l: rtc-int-l { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb { usb_host_pwren_h: usb-host-pwren-h { rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; usb_otg_pwren_h: usb-otg-pwren-h { rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; usb_wifi_pwr: usb-wifi-pwr { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc_5v0_pwren_h: vcc-5v0-pwren-h { rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pwm3m1_pins>; status = "okay"; }; &saradc { vref-supply = <&vcca_1v8_s0>; status = "okay"; }; &sdhci { bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; no-sdio; no-sd; non-removable; status = "okay"; }; &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; no-sdio; no-mmc; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; status = "okay"; }; &sfc { pinctrl-names = "default"; pinctrl-0 = <&fspim0_pins>; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <1>; }; }; &spi2 { status = "okay"; assigned-clocks = <&cru CLK_SPI2>; assigned-clock-rates = <200000000>; num-cs = <1>; pinctrl-names = "default"; pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; pmic@0 { compatible = "rockchip,rk806"; reg = <0>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gpio0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; system-power-controller; vcc1-supply = <&vcc_sysin>; vcc2-supply = <&vcc_sysin>; vcc3-supply = <&vcc_sysin>; vcc4-supply = <&vcc_sysin>; vcc5-supply = <&vcc_sysin>; vcc6-supply = <&vcc_sysin>; vcc7-supply = <&vcc_sysin>; vcc8-supply = <&vcc_sysin>; vcc9-supply = <&vcc_sysin>; vcc10-supply = <&vcc_sysin>; vcc11-supply = <&vcc_2v0_pldo_s3>; vcc12-supply = <&vcc_sysin>; vcc13-supply = <&vcc_1v1_nldo_s3>; vcc14-supply = <&vcc_1v1_nldo_s3>; vcca-supply = <&vcca>; rk806_dvs1_null: dvs1-null-pins { pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; rk806_dvs2_null: dvs2-null-pins { pins = "gpio_pwrctrl2"; function = "pin_fun0"; }; rk806_dvs3_null: dvs3-null-pins { pins = "gpio_pwrctrl3"; function = "pin_fun0"; }; regulators { vdd_gpu_s0: dcdc-reg1 { regulator-name = "vdd_gpu_s0"; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-enable-ramp-delay = <400>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_lit_s0: dcdc-reg2 { regulator-name = "vdd_cpu_lit_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_logic_s0: dcdc-reg3 { regulator-name = "vdd_logic_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <675000>; regulator-max-microvolt = <750000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <750000>; }; }; vdd_vdenc_s0: dcdc-reg4 { regulator-name = "vdd_vdenc_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <550000>; regulator-max-microvolt = <950000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_ddr_s0: dcdc-reg5 { regulator-name = "vdd_ddr_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <675000>; regulator-max-microvolt = <900000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-off-in-suspend; regulator-suspend-microvolt = <850000>; }; }; vdd2_ddr_s3: dcdc-reg6 { regulator-name = "vdd2_ddr_s3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_2v0_pldo_s3: dcdc-reg7 { regulator-name = "vdd_2v0_pldo_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-ramp-delay = <12500>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <2000000>; }; }; vcc_3v3_s3: dcdc-reg8 { regulator-name = "vcc_3v3_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vddq_ddr_s0: dcdc-reg9 { regulator-name = "vddq_ddr_s0"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmu_ddr_s3: dcdc-reg10 { regulator-name = "vcc1v8_pmu_ddr_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc_1v8_s0: pldo-reg1 { regulator-name = "vcc_1v8_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca_1v8_s0: pldo-reg2 { regulator-name = "vcca_1v8_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vdda_1v2_s0: pldo-reg3 { regulator-name = "vdda_1v2_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcca_3v3_s0: pldo-reg4 { regulator-name = "vcca_3v3_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vccio_sd_s0: pldo-reg5 { regulator-name = "vccio_sd_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; pldo6_s3: pldo-reg6 { regulator-name = "pldo6_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vdd_0v75_s3: nldo-reg1 { regulator-name = "vdd_0v75_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <750000>; }; }; vdda_ddr_pll_s0: nldo-reg2 { regulator-name = "vdda_ddr_pll_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <850000>; }; }; vdda_0v75_s0: nldo-reg3 { regulator-name = "vdda_0v75_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v85_s0: nldo-reg4 { regulator-name = "vdda_0v85_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <850000>; regulator-max-microvolt = <850000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_0v75_s0: nldo-reg5 { regulator-name = "vdd_0v75_s0"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &tsadc { status = "okay"; }; &u2phy0 { status = "okay"; }; &u2phy0_otg { phy-supply = <&vcc5v0_usb_otg0>; status = "okay"; }; &u2phy2 { status = "okay"; }; &u2phy2_host { /* connected to USB hub, which is powered by vcc_5v0 */ phy-supply = <&vcc_5v0>; status = "okay"; }; &u2phy3 { status = "okay"; }; &u2phy3_host { phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; &usbdp_phy0 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_xhci { dr_mode = "host"; status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usb_host2_xhci { status = "okay"; }; &vop_mmu { status = "okay"; }; &vop { status = "okay"; }; &vp0 { vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { reg = ; remote-endpoint = <&hdmi0_in_vp0>; }; };