ELF>pE@@AVHIAUIATIUHSHLHHHMD$HHHHED$HHHHED$HHHHED$HHHHED$HHHHMHHA|$ HHMDMHHA|$!HHMDMHHA|$"HHMDED$$HHHHMHHA|$(HHMDED$,HHHHED$0HHHHED$4HHHHMHHA|$8HHMDMHHA|$9HHMDMHHA|$:HHMDMHHA|$;HHMDMHHA|$<HHMDMHHA|$=HHMDED$@HHHHED$DHHHHMHHA|$HHHMDMHHA|$IHHMDED$LHHH[H]A\A]A^fUH SHH=H;HHHDHCHHCHHCHHC HHC(HHC0HHC8HHC@HHCHH{ HHHDHC[]ff.@SHH?HH{HC[yesnodmc_firmware_path%s.%s=%s vbt_firmwarelvds_channel_mode%s.%s=%d panel_use_sscvbt_sdvo_panel_typeenable_dcenable_dptenable_dsbenable_sagvdisable_power_wellenable_ipsinvert_brightnessedp_vswingenable_dpcd_backlightload_detect_testforce_reset_modeset_testdisable_displayverbose_state_checksnuclear_pageflipenable_dp_mstenable_fbcenable_psrpsr_safest_paramsenable_psr2_sel_fetchenable_dmc_wli915.parm=enable_dmc_wl:Enable DMC wakelock (-1=use per-chip default, 0=disabled, 1=enabled) Default: -1i915.parmtype=enable_dmc_wl:inti915.parm=enable_psr2_sel_fetch:Enable PSR2 and Panel Replay selective fetch (0=disabled, 1=enabled) Default: 1i915.parmtype=enable_psr2_sel_fetch:booli915.parm=psr_safest_params:Replace PSR VBT parameters by the safest and not optimal ones. This is helpful to detect if PSR issues are related to bad values set in VBT. (0=use VBT parameters, 1=use safest parameters)Default: 0i915.parmtype=psr_safest_params:booli915.parm=enable_psr:Enable PSR (0=disabled, 1=enable up to PSR1, 2=enable up to PSR2) Default: -1 (use per-chip default)i915.parmtype=enable_psr:inti915.parm=enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default))i915.parmtype=enable_fbc:inti915.parm=enable_dp_mst:Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)i915.parmtype=enable_dp_mst:booli915.parm=nuclear_pageflip:Force enable atomic functionality on platforms that don't have full support yet.i915.parmtype=nuclear_pageflip:booli915.parm=verbose_state_checks:Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.i915.parmtype=verbose_state_checks:booli915.parm=disable_display:Disable display (default: false)i915.parmtype=disable_display:booli915.parm=force_reset_modeset_test:Force a modeset during gpu reset for testing (default:false). For developers only.i915.parmtype=force_reset_modeset_test:booli915.parm=load_detect_test:Force-enable the VGA load detect code for testing (default:false). For developers only.i915.parmtype=load_detect_test:booli915.parm=enable_dpcd_backlight:Enable support for DPCD backlight control(-1=use per-VBT LFP backlight type setting [default], 0=disabled, 1=enable, 2=force VESA interface, 3=force Intel interface)i915.parmtype=enable_dpcd_backlight:inti915.parm=edp_vswing:Ignore/Override vswing pre-emph table selection from VBT (0=use value from vbt [default], 1=low power swing(200mV),2=default swing(400mV))i915.parmtype=edp_vswing:inti915.parm=invert_brightness:Invert backlight brightness (-1 force normal, 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem vendor and subsystem device ID to dri-devel@lists.freedesktop.org, if your machine needs it. It will then be included in an upcoming module version.i915.parmtype=invert_brightness:inti915.parm=enable_ips:Enable IPS (default: true)i915.parmtype=enable_ips:booli915.parm=disable_power_well:Disable display power wells when possible (-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)i915.parmtype=disable_power_well:inti915.parm=enable_sagv:Enable system agent voltage/frequency scaling (SAGV) (default: true)i915.parmtype=enable_sagv:booli915.parm=enable_dsb:Enable display state buffer (DSB) (default: true)i915.parmtype=enable_dsb:booli915.parm=enable_dpt:Enable display page table (DPT) (default: true)i915.parmtype=enable_dpt:booli915.parm=enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; 3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)i915.parmtype=enable_dc:inti915.parm=vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table)i915.parmtype=vbt_sdvo_panel_type:inti915.parm=panel_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT)i915.parmtype=panel_use_ssc:inti915.parm=lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel)i915.parmtype=lvds_channel_mode:inti915.parm=vbt_firmware:Load VBT from specified file under /lib/firmwarei915.parmtype=vbt_firmware:charpi915.parm=dmc_firmware_path:DMC firmware path to use instead of the default one. Use /dev/null to disable DMC and runtime PM.i915.parmtype=dmc_firmware_path:charpi915.enable_dmc_wli915.enable_psr2_sel_fetchi915.psr_safest_paramsi915.enable_psri915.enable_fbci915.enable_dp_msti915.nuclear_pageflipi915.verbose_state_checksi915.disable_displayi915.force_reset_modeset_testi915.load_detect_testi915.enable_dpcd_backlighti915.edp_vswingi915.invert_brightnessi915.enable_ipsi915.disable_power_welli915.enable_sagvi915.enable_dsbi915.enable_dpti915.enable_dci915.vbt_sdvo_panel_typei915.panel_use_ssci915.lvds_channel_modei915.vbt_firmwarei915.dmc_firmware_pathGCC: (Debian 12.2.0-14) 12.2.0GNU P0iMi n (  p) ((  ,"M%r P( @+z x( ` l&.D (W pnKg! ( l?$  (9 Vcnz( ( ;4#" @(: VWv~, h( sl$4 (M jV( ( @~0 (C `Z;.{i $ ( p 0  0(# : \u % X(  [  (  " G<[ Z (m y E  (     (.  D  g ) &  (   O b    H(  08  qY B$~  p(  P fH !  (  p ~A M&f  (   w     p.  & 5 intel_display_params.cintel_display_modparams__UNIQUE_ID_enable_dmc_wl429__UNIQUE_ID_enable_dmc_wltype428__param_enable_dmc_wl__param_str_enable_dmc_wl__UNIQUE_ID_enable_psr2_sel_fetch427__UNIQUE_ID_enable_psr2_sel_fetchtype426__param_enable_psr2_sel_fetch__param_str_enable_psr2_sel_fetch__UNIQUE_ID_psr_safest_params425__UNIQUE_ID_psr_safest_paramstype424__param_psr_safest_params__param_str_psr_safest_params__UNIQUE_ID_enable_psr423__UNIQUE_ID_enable_psrtype422__param_enable_psr__param_str_enable_psr__UNIQUE_ID_enable_fbc421__UNIQUE_ID_enable_fbctype420__param_enable_fbc__param_str_enable_fbc__UNIQUE_ID_enable_dp_mst419__UNIQUE_ID_enable_dp_msttype418__param_enable_dp_mst__param_str_enable_dp_mst__UNIQUE_ID_nuclear_pageflip417__UNIQUE_ID_nuclear_pagefliptype416__param_nuclear_pageflip__param_str_nuclear_pageflip__UNIQUE_ID_verbose_state_checks415__UNIQUE_ID_verbose_state_checkstype414__param_verbose_state_checks__param_str_verbose_state_checks__UNIQUE_ID_disable_display413__UNIQUE_ID_disable_displaytype412__param_disable_display__param_str_disable_display__UNIQUE_ID_force_reset_modeset_test411__UNIQUE_ID_force_reset_modeset_testtype410__param_force_reset_modeset_test__param_str_force_reset_modeset_test__UNIQUE_ID_load_detect_test409__UNIQUE_ID_load_detect_testtype408__param_load_detect_test__param_str_load_detect_test__UNIQUE_ID_enable_dpcd_backlight407__UNIQUE_ID_enable_dpcd_backlighttype406__param_enable_dpcd_backlight__param_str_enable_dpcd_backlight__UNIQUE_ID_edp_vswing405__UNIQUE_ID_edp_vswingtype404__param_edp_vswing__param_str_edp_vswing__UNIQUE_ID_invert_brightness403__UNIQUE_ID_invert_brightnesstype402__param_invert_brightness__param_str_invert_brightness__UNIQUE_ID_enable_ips401__UNIQUE_ID_enable_ipstype400__param_enable_ips__param_str_enable_ips__UNIQUE_ID_disable_power_well399__UNIQUE_ID_disable_power_welltype398__param_disable_power_well__param_str_disable_power_well__UNIQUE_ID_enable_sagv397__UNIQUE_ID_enable_sagvtype396__param_enable_sagv__param_str_enable_sagv__UNIQUE_ID_enable_dsb395__UNIQUE_ID_enable_dsbtype394__param_enable_dsb__param_str_enable_dsb__UNIQUE_ID_enable_dpt393__UNIQUE_ID_enable_dpttype392__param_enable_dpt__param_str_enable_dpt__UNIQUE_ID_enable_dc391__UNIQUE_ID_enable_dctype390__param_enable_dc__param_str_enable_dc__UNIQUE_ID_vbt_sdvo_panel_type389__UNIQUE_ID_vbt_sdvo_panel_typetype388__param_vbt_sdvo_panel_type__param_str_vbt_sdvo_panel_type__UNIQUE_ID_panel_use_ssc387__UNIQUE_ID_panel_use_ssctype386__param_panel_use_ssc__param_str_panel_use_ssc__UNIQUE_ID_lvds_channel_mode385__UNIQUE_ID_lvds_channel_modetype384__param_lvds_channel_mode__param_str_lvds_channel_mode__UNIQUE_ID_vbt_firmware383__UNIQUE_ID_vbt_firmwaretype382__param_vbt_firmware__param_str_vbt_firmware__UNIQUE_ID_dmc_firmware_path381__UNIQUE_ID_dmc_firmware_pathtype380__param_dmc_firmware_path__param_str_dmc_firmware_pathintel_display_params_dumpdrm_printfintel_display_params_copykstrdup__x86_return_thunkintel_display_params_freekfreeparam_ops_intparam_ops_boolparam_ops_charp  ) F Kl] #d il{ 0 Bl L Bl Z Bl n Bl x l $ -lC J Sle l Bql  l  Bl  Bl  Bl  l- 4 =lS Z cly % l : l K l Y Bl d  Bl' o. 7lM T ]lo w B jjj jjj$j, j4j<!jD*nBn|qqlMoo` r jL( 8sHjIP @`spjHx `rjD prj@ sj= sj< (s8j;@ Ps`j:h xsj9 sj8 @rj4 `rj0 pr(j,0 @sPj(X hrxj$ sj" sj! sj  rj  0r@jH 0Xrhjp Prj ptj tj.symtab.strtab.shstrtab.rela.text.data.bss.rodata.str1.1.rela__patchable_function_entries.modinfo.rela__param.rodata.data..read_mostly.comment.note.GNU-stack.note.gnu.property @@4&,12E@@`=Hbspk@= xP 0 00 P k H(E D