// SPDX-License-Identifier: GPL-2.0-only /* * Analog Devices AD7944/85/86 PulSAR ADC family driver. * * Copyright 2024 Analog Devices, Inc. * Copyright 2024 BayLibre, SAS */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define AD7944_INTERNAL_REF_MV 4096 struct ad7944_timing_spec { /* Normal mode max conversion time (t_{CONV}). */ unsigned int conv_ns; /* TURBO mode max conversion time (t_{CONV}). */ unsigned int turbo_conv_ns; }; enum ad7944_spi_mode { /* datasheet calls this "4-wire mode" */ AD7944_SPI_MODE_DEFAULT, /* datasheet calls this "3-wire mode" (not related to SPI_3WIRE!) */ AD7944_SPI_MODE_SINGLE, /* datasheet calls this "chain mode" */ AD7944_SPI_MODE_CHAIN, }; /* maps adi,spi-mode property value to enum */ static const char * const ad7944_spi_modes[] = { [AD7944_SPI_MODE_DEFAULT] = "", [AD7944_SPI_MODE_SINGLE] = "single", [AD7944_SPI_MODE_CHAIN] = "chain", }; struct ad7944_adc { struct spi_device *spi; enum ad7944_spi_mode spi_mode; struct spi_transfer xfers[3]; struct spi_message msg; void *chain_mode_buf; /* Chip-specific timing specifications. */ const struct ad7944_timing_spec *timing_spec; /* GPIO connected to CNV pin. */ struct gpio_desc *cnv; /* Optional GPIO to enable turbo mode. */ struct gpio_desc *turbo; /* Indicates TURBO is hard-wired to be always enabled. */ bool always_turbo; /* Reference voltage (millivolts). */ unsigned int ref_mv; /* * DMA (thus cache coherency maintenance) requires the * transfer buffers to live in their own cache lines. */ struct { union { u16 u16; u32 u32; } raw; u64 timestamp __aligned(8); } sample __aligned(IIO_DMA_MINALIGN); }; /* quite time before CNV rising edge */ #define AD7944_T_QUIET_NS 20 static const struct ad7944_timing_spec ad7944_timing_spec = { .conv_ns = 420, .turbo_conv_ns = 320, }; static const struct ad7944_timing_spec ad7986_timing_spec = { .conv_ns = 500, .turbo_conv_ns = 400, }; struct ad7944_chip_info { const char *name; const struct ad7944_timing_spec *timing_spec; const struct iio_chan_spec channels[2]; }; /* * AD7944_DEFINE_CHIP_INFO - Define a chip info structure for a specific chip * @_name: The name of the chip * @_ts: The timing specification for the chip * @_bits: The number of bits in the conversion result * @_diff: Whether the chip is true differential or not */ #define AD7944_DEFINE_CHIP_INFO(_name, _ts, _bits, _diff) \ static const struct ad7944_chip_info _name##_chip_info = { \ .name = #_name, \ .timing_spec = &_ts##_timing_spec, \ .channels = { \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ .differential = _diff, \ .channel = 0, \ .channel2 = _diff ? 1 : 0, \ .scan_index = 0, \ .scan_type.sign = _diff ? 's' : 'u', \ .scan_type.realbits = _bits, \ .scan_type.storagebits = _bits > 16 ? 32 : 16, \ .scan_type.endianness = IIO_CPU, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) \ | BIT(IIO_CHAN_INFO_SCALE), \ }, \ IIO_CHAN_SOFT_TIMESTAMP(1), \ }, \ } /* pseudo-differential with ground sense */ AD7944_DEFINE_CHIP_INFO(ad7944, ad7944, 14, 0); AD7944_DEFINE_CHIP_INFO(ad7985, ad7944, 16, 0); /* fully differential */ AD7944_DEFINE_CHIP_INFO(ad7986, ad7986, 18, 1); static int ad7944_3wire_cs_mode_init_msg(struct device *dev, struct ad7944_adc *adc, const struct iio_chan_spec *chan) { unsigned int t_conv_ns = adc->always_turbo ? adc->timing_spec->turbo_conv_ns : adc->timing_spec->conv_ns; struct spi_transfer *xfers = adc->xfers; /* * NB: can get better performance from some SPI controllers if we use * the same bits_per_word in every transfer. */ xfers[0].bits_per_word = chan->scan_type.realbits; /* * CS is tied to CNV and we need a low to high transition to start the * conversion, so place CNV low for t_QUIET to prepare for this. */ xfers[0].delay.value = AD7944_T_QUIET_NS; xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS; /* * CS has to be high for full conversion time to avoid triggering the * busy indication. */ xfers[1].cs_off = 1; xfers[1].delay.value = t_conv_ns; xfers[1].delay.unit = SPI_DELAY_UNIT_NSECS; xfers[1].bits_per_word = chan->scan_type.realbits; /* Then we can read the data during the acquisition phase */ xfers[2].rx_buf = &adc->sample.raw; xfers[2].len = BITS_TO_BYTES(chan->scan_type.storagebits); xfers[2].bits_per_word = chan->scan_type.realbits; spi_message_init_with_transfers(&adc->msg, xfers, 3); return devm_spi_optimize_message(dev, adc->spi, &adc->msg); } static int ad7944_4wire_mode_init_msg(struct device *dev, struct ad7944_adc *adc, const struct iio_chan_spec *chan) { unsigned int t_conv_ns = adc->always_turbo ? adc->timing_spec->turbo_conv_ns : adc->timing_spec->conv_ns; struct spi_transfer *xfers = adc->xfers; /* * NB: can get better performance from some SPI controllers if we use * the same bits_per_word in every transfer. */ xfers[0].bits_per_word = chan->scan_type.realbits; /* * CS has to be high for full conversion time to avoid triggering the * busy indication. */ xfers[0].cs_off = 1; xfers[0].delay.value = t_conv_ns; xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS; xfers[1].rx_buf = &adc->sample.raw; xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits); xfers[1].bits_per_word = chan->scan_type.realbits; spi_message_init_with_transfers(&adc->msg, xfers, 2); return devm_spi_optimize_message(dev, adc->spi, &adc->msg); } static int ad7944_chain_mode_init_msg(struct device *dev, struct ad7944_adc *adc, const struct iio_chan_spec *chan, u32 n_chain_dev) { struct spi_transfer *xfers = adc->xfers; /* * NB: SCLK has to be low before we toggle CS to avoid triggering the * busy indication. */ if (adc->spi->mode & SPI_CPOL) return dev_err_probe(dev, -EINVAL, "chain mode requires ~SPI_CPOL\n"); /* * We only support CNV connected to CS in chain mode and we need CNV * to be high during the transfer to trigger the conversion. */ if (!(adc->spi->mode & SPI_CS_HIGH)) return dev_err_probe(dev, -EINVAL, "chain mode requires SPI_CS_HIGH\n"); /* CNV has to be high for full conversion time before reading data. */ xfers[0].delay.value = adc->timing_spec->conv_ns; xfers[0].delay.unit = SPI_DELAY_UNIT_NSECS; xfers[1].rx_buf = adc->chain_mode_buf; xfers[1].len = BITS_TO_BYTES(chan->scan_type.storagebits) * n_chain_dev; xfers[1].bits_per_word = chan->scan_type.realbits; spi_message_init_with_transfers(&adc->msg, xfers, 2); return devm_spi_optimize_message(dev, adc->spi, &adc->msg); } /** * ad7944_convert_and_acquire - Perform a single conversion and acquisition * @adc: The ADC device structure * Return: 0 on success, a negative error code on failure * * Perform a conversion and acquisition of a single sample using the * pre-optimized adc->msg. * * Upon successful return adc->sample.raw will contain the conversion result * (or adc->chain_mode_buf if the device is using chain mode). */ static int ad7944_convert_and_acquire(struct ad7944_adc *adc) { int ret; /* * In 4-wire mode, the CNV line is held high for the entire conversion * and acquisition process. In other modes adc->cnv is NULL and is * ignored (CS is wired to CNV in those cases). */ gpiod_set_value_cansleep(adc->cnv, 1); ret = spi_sync(adc->spi, &adc->msg); gpiod_set_value_cansleep(adc->cnv, 0); return ret; } static int ad7944_single_conversion(struct ad7944_adc *adc, const struct iio_chan_spec *chan, int *val) { int ret; ret = ad7944_convert_and_acquire(adc); if (ret) return ret; if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) { if (chan->scan_type.storagebits > 16) *val = ((u32 *)adc->chain_mode_buf)[chan->scan_index]; else *val = ((u16 *)adc->chain_mode_buf)[chan->scan_index]; } else { if (chan->scan_type.storagebits > 16) *val = adc->sample.raw.u32; else *val = adc->sample.raw.u16; } if (chan->scan_type.sign == 's') *val = sign_extend32(*val, chan->scan_type.realbits - 1); return IIO_VAL_INT; } static int ad7944_read_raw(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, int *val, int *val2, long info) { struct ad7944_adc *adc = iio_priv(indio_dev); int ret; switch (info) { case IIO_CHAN_INFO_RAW: ret = iio_device_claim_direct_mode(indio_dev); if (ret) return ret; ret = ad7944_single_conversion(adc, chan, val); iio_device_release_direct_mode(indio_dev); return ret; case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_VOLTAGE: *val = adc->ref_mv; if (chan->scan_type.sign == 's') *val2 = chan->scan_type.realbits - 1; else *val2 = chan->scan_type.realbits; return IIO_VAL_FRACTIONAL_LOG2; default: return -EINVAL; } default: return -EINVAL; } } static const struct iio_info ad7944_iio_info = { .read_raw = &ad7944_read_raw, }; static irqreturn_t ad7944_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct ad7944_adc *adc = iio_priv(indio_dev); int ret; ret = ad7944_convert_and_acquire(adc); if (ret) goto out; if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) iio_push_to_buffers_with_timestamp(indio_dev, adc->chain_mode_buf, pf->timestamp); else iio_push_to_buffers_with_timestamp(indio_dev, &adc->sample.raw, pf->timestamp); out: iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; } /** * ad7944_chain_mode_alloc - allocate and initialize channel specs and buffers * for daisy-chained devices * @dev: The device for devm_ functions * @chan_template: The channel template for the devices (array of 2 channels * voltage and timestamp) * @n_chain_dev: The number of devices in the chain * @chain_chan: Pointer to receive the allocated channel specs * @chain_mode_buf: Pointer to receive the allocated rx buffer * @chain_scan_masks: Pointer to receive the allocated scan masks * Return: 0 on success, a negative error code on failure */ static int ad7944_chain_mode_alloc(struct device *dev, const struct iio_chan_spec *chan_template, u32 n_chain_dev, struct iio_chan_spec **chain_chan, void **chain_mode_buf, unsigned long **chain_scan_masks) { struct iio_chan_spec *chan; size_t chain_mode_buf_size; unsigned long *scan_masks; void *buf; int i; /* 1 channel for each device in chain plus 1 for soft timestamp */ chan = devm_kcalloc(dev, n_chain_dev + 1, sizeof(*chan), GFP_KERNEL); if (!chan) return -ENOMEM; for (i = 0; i < n_chain_dev; i++) { chan[i] = chan_template[0]; if (chan_template[0].differential) { chan[i].channel = 2 * i; chan[i].channel2 = 2 * i + 1; } else { chan[i].channel = i; } chan[i].scan_index = i; } /* soft timestamp */ chan[i] = chan_template[1]; chan[i].scan_index = i; *chain_chan = chan; /* 1 word for each voltage channel + aligned u64 for timestamp */ chain_mode_buf_size = ALIGN(n_chain_dev * BITS_TO_BYTES(chan[0].scan_type.storagebits), sizeof(u64)) + sizeof(u64); buf = devm_kzalloc(dev, chain_mode_buf_size, GFP_KERNEL); if (!buf) return -ENOMEM; *chain_mode_buf = buf; /* * Have to limit n_chain_dev due to current implementation of * available_scan_masks. */ if (n_chain_dev > BITS_PER_LONG) return dev_err_probe(dev, -EINVAL, "chain is limited to 32 devices\n"); scan_masks = devm_kcalloc(dev, 2, sizeof(*scan_masks), GFP_KERNEL); if (!scan_masks) return -ENOMEM; /* * Scan mask is needed since we always have to read all devices in the * chain in one SPI transfer. */ scan_masks[0] = GENMASK(n_chain_dev - 1, 0); *chain_scan_masks = scan_masks; return 0; } static const char * const ad7944_power_supplies[] = { "avdd", "dvdd", "bvdd", "vio" }; static int ad7944_probe(struct spi_device *spi) { const struct ad7944_chip_info *chip_info; struct device *dev = &spi->dev; struct iio_dev *indio_dev; struct ad7944_adc *adc; bool have_refin; struct iio_chan_spec *chain_chan; unsigned long *chain_scan_masks; u32 n_chain_dev; int ret, ref_mv; indio_dev = devm_iio_device_alloc(dev, sizeof(*adc)); if (!indio_dev) return -ENOMEM; adc = iio_priv(indio_dev); adc->spi = spi; chip_info = spi_get_device_match_data(spi); if (!chip_info) return dev_err_probe(dev, -EINVAL, "no chip info\n"); adc->timing_spec = chip_info->timing_spec; ret = device_property_match_property_string(dev, "adi,spi-mode", ad7944_spi_modes, ARRAY_SIZE(ad7944_spi_modes)); /* absence of adi,spi-mode property means default mode */ if (ret == -EINVAL) adc->spi_mode = AD7944_SPI_MODE_DEFAULT; else if (ret < 0) return dev_err_probe(dev, ret, "getting adi,spi-mode property failed\n"); else adc->spi_mode = ret; /* * Some chips use unusual word sizes, so check now instead of waiting * for the first xfer. */ if (!spi_is_bpw_supported(spi, chip_info->channels[0].scan_type.realbits)) return dev_err_probe(dev, -EINVAL, "SPI host does not support %d bits per word\n", chip_info->channels[0].scan_type.realbits); ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(ad7944_power_supplies), ad7944_power_supplies); if (ret) return dev_err_probe(dev, ret, "failed to get and enable supplies\n"); /* * Sort out what is being used for the reference voltage. Options are: * - internal reference: neither REF or REFIN is connected * - internal reference with external buffer: REF not connected, REFIN * is connected * - external reference: REF is connected, REFIN is not connected */ ret = devm_regulator_get_enable_read_voltage(dev, "ref"); if (ret < 0 && ret != -ENODEV) return dev_err_probe(dev, ret, "failed to get REF voltage\n"); ref_mv = ret == -ENODEV ? 0 : ret / 1000; ret = devm_regulator_get_enable_optional(dev, "refin"); if (ret < 0 && ret != -ENODEV) return dev_err_probe(dev, ret, "failed to get REFIN voltage\n"); have_refin = ret != -ENODEV; if (have_refin && ref_mv) return dev_err_probe(dev, -EINVAL, "cannot have both refin and ref supplies\n"); adc->ref_mv = ref_mv ?: AD7944_INTERNAL_REF_MV; adc->cnv = devm_gpiod_get_optional(dev, "cnv", GPIOD_OUT_LOW); if (IS_ERR(adc->cnv)) return dev_err_probe(dev, PTR_ERR(adc->cnv), "failed to get CNV GPIO\n"); if (!adc->cnv && adc->spi_mode == AD7944_SPI_MODE_DEFAULT) return dev_err_probe(&spi->dev, -EINVAL, "CNV GPIO is required\n"); if (adc->cnv && adc->spi_mode != AD7944_SPI_MODE_DEFAULT) return dev_err_probe(&spi->dev, -EINVAL, "CNV GPIO in single and chain mode is not currently supported\n"); adc->turbo = devm_gpiod_get_optional(dev, "turbo", GPIOD_OUT_LOW); if (IS_ERR(adc->turbo)) return dev_err_probe(dev, PTR_ERR(adc->turbo), "failed to get TURBO GPIO\n"); adc->always_turbo = device_property_present(dev, "adi,always-turbo"); if (adc->turbo && adc->always_turbo) return dev_err_probe(dev, -EINVAL, "cannot have both turbo-gpios and adi,always-turbo\n"); if (adc->spi_mode == AD7944_SPI_MODE_CHAIN && adc->always_turbo) return dev_err_probe(dev, -EINVAL, "cannot have both chain mode and always turbo\n"); switch (adc->spi_mode) { case AD7944_SPI_MODE_DEFAULT: ret = ad7944_4wire_mode_init_msg(dev, adc, &chip_info->channels[0]); if (ret) return ret; break; case AD7944_SPI_MODE_SINGLE: ret = ad7944_3wire_cs_mode_init_msg(dev, adc, &chip_info->channels[0]); if (ret) return ret; break; case AD7944_SPI_MODE_CHAIN: ret = device_property_read_u32(dev, "#daisy-chained-devices", &n_chain_dev); if (ret) return dev_err_probe(dev, ret, "failed to get #daisy-chained-devices\n"); ret = ad7944_chain_mode_alloc(dev, chip_info->channels, n_chain_dev, &chain_chan, &adc->chain_mode_buf, &chain_scan_masks); if (ret) return ret; ret = ad7944_chain_mode_init_msg(dev, adc, &chain_chan[0], n_chain_dev); if (ret) return ret; break; } indio_dev->name = chip_info->name; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->info = &ad7944_iio_info; if (adc->spi_mode == AD7944_SPI_MODE_CHAIN) { indio_dev->available_scan_masks = chain_scan_masks; indio_dev->channels = chain_chan; indio_dev->num_channels = n_chain_dev + 1; } else { indio_dev->channels = chip_info->channels; indio_dev->num_channels = ARRAY_SIZE(chip_info->channels); } ret = devm_iio_triggered_buffer_setup(dev, indio_dev, iio_pollfunc_store_time, ad7944_trigger_handler, NULL); if (ret) return ret; return devm_iio_device_register(dev, indio_dev); } static const struct of_device_id ad7944_of_match[] = { { .compatible = "adi,ad7944", .data = &ad7944_chip_info }, { .compatible = "adi,ad7985", .data = &ad7985_chip_info }, { .compatible = "adi,ad7986", .data = &ad7986_chip_info }, { } }; MODULE_DEVICE_TABLE(of, ad7944_of_match); static const struct spi_device_id ad7944_spi_id[] = { { "ad7944", (kernel_ulong_t)&ad7944_chip_info }, { "ad7985", (kernel_ulong_t)&ad7985_chip_info }, { "ad7986", (kernel_ulong_t)&ad7986_chip_info }, { } }; MODULE_DEVICE_TABLE(spi, ad7944_spi_id); static struct spi_driver ad7944_driver = { .driver = { .name = "ad7944", .of_match_table = ad7944_of_match, }, .probe = ad7944_probe, .id_table = ad7944_spi_id, }; module_spi_driver(ad7944_driver); MODULE_AUTHOR("David Lechner "); MODULE_DESCRIPTION("Analog Devices AD7944 PulSAR ADC family driver"); MODULE_LICENSE("GPL");