// SPDX-License-Identifier: GPL-2.0-only /* * Copyright 2013-2015 Analog Devices Inc. * Author: Lars-Peter Clausen */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * For DMA buffers the storage is sub-divided into so called blocks. Each block * has its own memory buffer. The size of the block is the granularity at which * memory is exchanged between the hardware and the application. Increasing the * basic unit of data exchange from one sample to one block decreases the * management overhead that is associated with each sample. E.g. if we say the * management overhead for one exchange is x and the unit of exchange is one * sample the overhead will be x for each sample. Whereas when using a block * which contains n samples the overhead per sample is reduced to x/n. This * allows to achieve much higher samplerates than what can be sustained with * the one sample approach. * * Blocks are exchanged between the DMA controller and the application via the * means of two queues. The incoming queue and the outgoing queue. Blocks on the * incoming queue are waiting for the DMA controller to pick them up and fill * them with data. Block on the outgoing queue have been filled with data and * are waiting for the application to dequeue them and read the data. * * A block can be in one of the following states: * * Owned by the application. In this state the application can read data from * the block. * * On the incoming list: Blocks on the incoming list are queued up to be * processed by the DMA controller. * * Owned by the DMA controller: The DMA controller is processing the block * and filling it with data. * * On the outgoing list: Blocks on the outgoing list have been successfully * processed by the DMA controller and contain data. They can be dequeued by * the application. * * Dead: A block that is dead has been marked as to be freed. It might still * be owned by either the application or the DMA controller at the moment. * But once they are done processing it instead of going to either the * incoming or outgoing queue the block will be freed. * * In addition to this blocks are reference counted and the memory associated * with both the block structure as well as the storage memory for the block * will be freed when the last reference to the block is dropped. This means a * block must not be accessed without holding a reference. * * The iio_dma_buffer implementation provides a generic infrastructure for * managing the blocks. * * A driver for a specific piece of hardware that has DMA capabilities need to * implement the submit() callback from the iio_dma_buffer_ops structure. This * callback is supposed to initiate the DMA transfer copying data from the * converter to the memory region of the block. Once the DMA transfer has been * completed the driver must call iio_dma_buffer_block_done() for the completed * block. * * Prior to this it must set the bytes_used field of the block contains * the actual number of bytes in the buffer. Typically this will be equal to the * size of the block, but if the DMA hardware has certain alignment requirements * for the transfer length it might choose to use less than the full size. In * either case it is expected that bytes_used is a multiple of the bytes per * datum, i.e. the block must not contain partial samples. * * The driver must call iio_dma_buffer_block_done() for each block it has * received through its submit_block() callback, even if it does not actually * perform a DMA transfer for the block, e.g. because the buffer was disabled * before the block transfer was started. In this case it should set bytes_used * to 0. * * In addition it is recommended that a driver implements the abort() callback. * It will be called when the buffer is disabled and can be used to cancel * pending and stop active transfers. * * The specific driver implementation should use the default callback * implementations provided by this module for the iio_buffer_access_funcs * struct. It may overload some callbacks with custom variants if the hardware * has special requirements that are not handled by the generic functions. If a * driver chooses to overload a callback it has to ensure that the generic * callback is called from within the custom callback. */ static void iio_buffer_block_release(struct kref *kref) { struct iio_dma_buffer_block *block = container_of(kref, struct iio_dma_buffer_block, kref); struct iio_dma_buffer_queue *queue = block->queue; WARN_ON(block->fileio && block->state != IIO_BLOCK_STATE_DEAD); if (block->fileio) { dma_free_coherent(queue->dev, PAGE_ALIGN(block->size), block->vaddr, block->phys_addr); } else { atomic_dec(&queue->num_dmabufs); } iio_buffer_put(&queue->buffer); kfree(block); } static void iio_buffer_block_get(struct iio_dma_buffer_block *block) { kref_get(&block->kref); } static void iio_buffer_block_put(struct iio_dma_buffer_block *block) { kref_put(&block->kref, iio_buffer_block_release); } /* * dma_free_coherent can sleep, hence we need to take some special care to be * able to drop a reference from an atomic context. */ static LIST_HEAD(iio_dma_buffer_dead_blocks); static DEFINE_SPINLOCK(iio_dma_buffer_dead_blocks_lock); static void iio_dma_buffer_cleanup_worker(struct work_struct *work) { struct iio_dma_buffer_block *block, *_block; LIST_HEAD(block_list); spin_lock_irq(&iio_dma_buffer_dead_blocks_lock); list_splice_tail_init(&iio_dma_buffer_dead_blocks, &block_list); spin_unlock_irq(&iio_dma_buffer_dead_blocks_lock); list_for_each_entry_safe(block, _block, &block_list, head) iio_buffer_block_release(&block->kref); } static DECLARE_WORK(iio_dma_buffer_cleanup_work, iio_dma_buffer_cleanup_worker); static void iio_buffer_block_release_atomic(struct kref *kref) { struct iio_dma_buffer_block *block; unsigned long flags; block = container_of(kref, struct iio_dma_buffer_block, kref); spin_lock_irqsave(&iio_dma_buffer_dead_blocks_lock, flags); list_add_tail(&block->head, &iio_dma_buffer_dead_blocks); spin_unlock_irqrestore(&iio_dma_buffer_dead_blocks_lock, flags); schedule_work(&iio_dma_buffer_cleanup_work); } /* * Version of iio_buffer_block_put() that can be called from atomic context */ static void iio_buffer_block_put_atomic(struct iio_dma_buffer_block *block) { kref_put(&block->kref, iio_buffer_block_release_atomic); } static struct iio_dma_buffer_queue *iio_buffer_to_queue(struct iio_buffer *buf) { return container_of(buf, struct iio_dma_buffer_queue, buffer); } static struct iio_dma_buffer_block *iio_dma_buffer_alloc_block( struct iio_dma_buffer_queue *queue, size_t size, bool fileio) { struct iio_dma_buffer_block *block; block = kzalloc(sizeof(*block), GFP_KERNEL); if (!block) return NULL; if (fileio) { block->vaddr = dma_alloc_coherent(queue->dev, PAGE_ALIGN(size), &block->phys_addr, GFP_KERNEL); if (!block->vaddr) { kfree(block); return NULL; } } block->fileio = fileio; block->size = size; block->state = IIO_BLOCK_STATE_DONE; block->queue = queue; INIT_LIST_HEAD(&block->head); kref_init(&block->kref); iio_buffer_get(&queue->buffer); if (!fileio) atomic_inc(&queue->num_dmabufs); return block; } static void _iio_dma_buffer_block_done(struct iio_dma_buffer_block *block) { if (block->state != IIO_BLOCK_STATE_DEAD) block->state = IIO_BLOCK_STATE_DONE; } static void iio_dma_buffer_queue_wake(struct iio_dma_buffer_queue *queue) { __poll_t flags; if (queue->buffer.direction == IIO_BUFFER_DIRECTION_IN) flags = EPOLLIN | EPOLLRDNORM; else flags = EPOLLOUT | EPOLLWRNORM; wake_up_interruptible_poll(&queue->buffer.pollq, flags); } /** * iio_dma_buffer_block_done() - Indicate that a block has been completed * @block: The completed block * * Should be called when the DMA controller has finished handling the block to * pass back ownership of the block to the queue. */ void iio_dma_buffer_block_done(struct iio_dma_buffer_block *block) { struct iio_dma_buffer_queue *queue = block->queue; unsigned long flags; bool cookie; cookie = dma_fence_begin_signalling(); spin_lock_irqsave(&queue->list_lock, flags); _iio_dma_buffer_block_done(block); spin_unlock_irqrestore(&queue->list_lock, flags); if (!block->fileio) iio_buffer_signal_dmabuf_done(block->fence, 0); iio_buffer_block_put_atomic(block); iio_dma_buffer_queue_wake(queue); dma_fence_end_signalling(cookie); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_block_done, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_block_list_abort() - Indicate that a list block has been * aborted * @queue: Queue for which to complete blocks. * @list: List of aborted blocks. All blocks in this list must be from @queue. * * Typically called from the abort() callback after the DMA controller has been * stopped. This will set bytes_used to 0 for each block in the list and then * hand the blocks back to the queue. */ void iio_dma_buffer_block_list_abort(struct iio_dma_buffer_queue *queue, struct list_head *list) { struct iio_dma_buffer_block *block, *_block; unsigned long flags; bool cookie; cookie = dma_fence_begin_signalling(); spin_lock_irqsave(&queue->list_lock, flags); list_for_each_entry_safe(block, _block, list, head) { list_del(&block->head); block->bytes_used = 0; _iio_dma_buffer_block_done(block); if (!block->fileio) iio_buffer_signal_dmabuf_done(block->fence, -EINTR); iio_buffer_block_put_atomic(block); } spin_unlock_irqrestore(&queue->list_lock, flags); if (queue->fileio.enabled) queue->fileio.enabled = false; iio_dma_buffer_queue_wake(queue); dma_fence_end_signalling(cookie); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_block_list_abort, "IIO_DMA_BUFFER"); static bool iio_dma_block_reusable(struct iio_dma_buffer_block *block) { /* * If the core owns the block it can be re-used. This should be the * default case when enabling the buffer, unless the DMA controller does * not support abort and has not given back the block yet. */ switch (block->state) { case IIO_BLOCK_STATE_QUEUED: case IIO_BLOCK_STATE_DONE: return true; default: return false; } } static bool iio_dma_buffer_can_use_fileio(struct iio_dma_buffer_queue *queue) { /* * Note that queue->num_dmabufs cannot increase while the queue is * locked, it can only decrease, so it does not race against * iio_dma_buffer_alloc_block(). */ return queue->fileio.enabled || !atomic_read(&queue->num_dmabufs); } /** * iio_dma_buffer_request_update() - DMA buffer request_update callback * @buffer: The buffer which to request an update * * Should be used as the iio_dma_buffer_request_update() callback for * iio_buffer_access_ops struct for DMA buffers. */ int iio_dma_buffer_request_update(struct iio_buffer *buffer) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); struct iio_dma_buffer_block *block; bool try_reuse = false; size_t size; int ret = 0; int i; /* * Split the buffer into two even parts. This is used as a double * buffering scheme with usually one block at a time being used by the * DMA and the other one by the application. */ size = DIV_ROUND_UP(queue->buffer.bytes_per_datum * queue->buffer.length, 2); mutex_lock(&queue->lock); queue->fileio.enabled = iio_dma_buffer_can_use_fileio(queue); /* If DMABUFs were created, disable fileio interface */ if (!queue->fileio.enabled) goto out_unlock; /* Allocations are page aligned */ if (PAGE_ALIGN(queue->fileio.block_size) == PAGE_ALIGN(size)) try_reuse = true; queue->fileio.block_size = size; queue->fileio.active_block = NULL; spin_lock_irq(&queue->list_lock); for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { block = queue->fileio.blocks[i]; /* If we can't re-use it free it */ if (block && (!iio_dma_block_reusable(block) || !try_reuse)) block->state = IIO_BLOCK_STATE_DEAD; } /* * At this point all blocks are either owned by the core or marked as * dead. This means we can reset the lists without having to fear * corrution. */ spin_unlock_irq(&queue->list_lock); INIT_LIST_HEAD(&queue->incoming); for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { if (queue->fileio.blocks[i]) { block = queue->fileio.blocks[i]; if (block->state == IIO_BLOCK_STATE_DEAD) { /* Could not reuse it */ iio_buffer_block_put(block); block = NULL; } else { block->size = size; } } else { block = NULL; } if (!block) { block = iio_dma_buffer_alloc_block(queue, size, true); if (!block) { ret = -ENOMEM; goto out_unlock; } queue->fileio.blocks[i] = block; } /* * block->bytes_used may have been modified previously, e.g. by * iio_dma_buffer_block_list_abort(). Reset it here to the * block's so that iio_dma_buffer_io() will work. */ block->bytes_used = block->size; /* * If it's an input buffer, mark the block as queued, and * iio_dma_buffer_enable() will submit it. Otherwise mark it as * done, which means it's ready to be dequeued. */ if (queue->buffer.direction == IIO_BUFFER_DIRECTION_IN) { block->state = IIO_BLOCK_STATE_QUEUED; list_add_tail(&block->head, &queue->incoming); } else { block->state = IIO_BLOCK_STATE_DONE; } } out_unlock: mutex_unlock(&queue->lock); return ret; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_request_update, "IIO_DMA_BUFFER"); static void iio_dma_buffer_fileio_free(struct iio_dma_buffer_queue *queue) { unsigned int i; spin_lock_irq(&queue->list_lock); for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { if (!queue->fileio.blocks[i]) continue; queue->fileio.blocks[i]->state = IIO_BLOCK_STATE_DEAD; } spin_unlock_irq(&queue->list_lock); INIT_LIST_HEAD(&queue->incoming); for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { if (!queue->fileio.blocks[i]) continue; iio_buffer_block_put(queue->fileio.blocks[i]); queue->fileio.blocks[i] = NULL; } queue->fileio.active_block = NULL; } static void iio_dma_buffer_submit_block(struct iio_dma_buffer_queue *queue, struct iio_dma_buffer_block *block) { int ret; /* * If the hardware has already been removed we put the block into * limbo. It will neither be on the incoming nor outgoing list, nor will * it ever complete. It will just wait to be freed eventually. */ if (!queue->ops) return; block->state = IIO_BLOCK_STATE_ACTIVE; iio_buffer_block_get(block); ret = queue->ops->submit(queue, block); if (ret) { if (!block->fileio) iio_buffer_signal_dmabuf_done(block->fence, ret); /* * This is a bit of a problem and there is not much we can do * other then wait for the buffer to be disabled and re-enabled * and try again. But it should not really happen unless we run * out of memory or something similar. * * TODO: Implement support in the IIO core to allow buffers to * notify consumers that something went wrong and the buffer * should be disabled. */ iio_buffer_block_put(block); } } /** * iio_dma_buffer_enable() - Enable DMA buffer * @buffer: IIO buffer to enable * @indio_dev: IIO device the buffer is attached to * * Needs to be called when the device that the buffer is attached to starts * sampling. Typically should be the iio_buffer_access_ops enable callback. * * This will allocate the DMA buffers and start the DMA transfers. */ int iio_dma_buffer_enable(struct iio_buffer *buffer, struct iio_dev *indio_dev) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); struct iio_dma_buffer_block *block, *_block; mutex_lock(&queue->lock); queue->active = true; list_for_each_entry_safe(block, _block, &queue->incoming, head) { list_del(&block->head); iio_dma_buffer_submit_block(queue, block); } mutex_unlock(&queue->lock); return 0; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_enable, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_disable() - Disable DMA buffer * @buffer: IIO DMA buffer to disable * @indio_dev: IIO device the buffer is attached to * * Needs to be called when the device that the buffer is attached to stops * sampling. Typically should be the iio_buffer_access_ops disable callback. */ int iio_dma_buffer_disable(struct iio_buffer *buffer, struct iio_dev *indio_dev) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); mutex_lock(&queue->lock); queue->active = false; if (queue->ops && queue->ops->abort) queue->ops->abort(queue); mutex_unlock(&queue->lock); return 0; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_disable, "IIO_DMA_BUFFER"); static void iio_dma_buffer_enqueue(struct iio_dma_buffer_queue *queue, struct iio_dma_buffer_block *block) { if (block->state == IIO_BLOCK_STATE_DEAD) { iio_buffer_block_put(block); } else if (queue->active) { iio_dma_buffer_submit_block(queue, block); } else { block->state = IIO_BLOCK_STATE_QUEUED; list_add_tail(&block->head, &queue->incoming); } } static struct iio_dma_buffer_block *iio_dma_buffer_dequeue( struct iio_dma_buffer_queue *queue) { struct iio_dma_buffer_block *block; unsigned int idx; spin_lock_irq(&queue->list_lock); idx = queue->fileio.next_dequeue; block = queue->fileio.blocks[idx]; if (block->state == IIO_BLOCK_STATE_DONE) { idx = (idx + 1) % ARRAY_SIZE(queue->fileio.blocks); queue->fileio.next_dequeue = idx; } else { block = NULL; } spin_unlock_irq(&queue->list_lock); return block; } static int iio_dma_buffer_io(struct iio_buffer *buffer, size_t n, char __user *user_buffer, bool is_from_user) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); struct iio_dma_buffer_block *block; void *addr; int ret; if (n < buffer->bytes_per_datum) return -EINVAL; mutex_lock(&queue->lock); if (!queue->fileio.active_block) { block = iio_dma_buffer_dequeue(queue); if (block == NULL) { ret = 0; goto out_unlock; } queue->fileio.pos = 0; queue->fileio.active_block = block; } else { block = queue->fileio.active_block; } n = rounddown(n, buffer->bytes_per_datum); if (n > block->bytes_used - queue->fileio.pos) n = block->bytes_used - queue->fileio.pos; addr = block->vaddr + queue->fileio.pos; if (is_from_user) ret = copy_from_user(addr, user_buffer, n); else ret = copy_to_user(user_buffer, addr, n); if (ret) { ret = -EFAULT; goto out_unlock; } queue->fileio.pos += n; if (queue->fileio.pos == block->bytes_used) { queue->fileio.active_block = NULL; iio_dma_buffer_enqueue(queue, block); } ret = n; out_unlock: mutex_unlock(&queue->lock); return ret; } /** * iio_dma_buffer_read() - DMA buffer read callback * @buffer: Buffer to read form * @n: Number of bytes to read * @user_buffer: Userspace buffer to copy the data to * * Should be used as the read callback for iio_buffer_access_ops * struct for DMA buffers. */ int iio_dma_buffer_read(struct iio_buffer *buffer, size_t n, char __user *user_buffer) { return iio_dma_buffer_io(buffer, n, user_buffer, false); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_read, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_write() - DMA buffer write callback * @buffer: Buffer to read form * @n: Number of bytes to read * @user_buffer: Userspace buffer to copy the data from * * Should be used as the write callback for iio_buffer_access_ops * struct for DMA buffers. */ int iio_dma_buffer_write(struct iio_buffer *buffer, size_t n, const char __user *user_buffer) { return iio_dma_buffer_io(buffer, n, (__force __user char *)user_buffer, true); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_write, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_usage() - DMA buffer data_available and * space_available callback * @buf: Buffer to check for data availability * * Should be used as the data_available and space_available callbacks for * iio_buffer_access_ops struct for DMA buffers. */ size_t iio_dma_buffer_usage(struct iio_buffer *buf) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buf); struct iio_dma_buffer_block *block; size_t data_available = 0; unsigned int i; /* * For counting the available bytes we'll use the size of the block not * the number of actual bytes available in the block. Otherwise it is * possible that we end up with a value that is lower than the watermark * but won't increase since all blocks are in use. */ mutex_lock(&queue->lock); if (queue->fileio.active_block) data_available += queue->fileio.active_block->size; spin_lock_irq(&queue->list_lock); for (i = 0; i < ARRAY_SIZE(queue->fileio.blocks); i++) { block = queue->fileio.blocks[i]; if (block != queue->fileio.active_block && block->state == IIO_BLOCK_STATE_DONE) data_available += block->size; } spin_unlock_irq(&queue->list_lock); mutex_unlock(&queue->lock); return data_available; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_usage, "IIO_DMA_BUFFER"); struct iio_dma_buffer_block * iio_dma_buffer_attach_dmabuf(struct iio_buffer *buffer, struct dma_buf_attachment *attach) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); struct iio_dma_buffer_block *block; guard(mutex)(&queue->lock); /* * If the buffer is enabled and in fileio mode new blocks can't be * allocated. */ if (queue->fileio.enabled) return ERR_PTR(-EBUSY); block = iio_dma_buffer_alloc_block(queue, attach->dmabuf->size, false); if (!block) return ERR_PTR(-ENOMEM); /* Free memory that might be in use for fileio mode */ iio_dma_buffer_fileio_free(queue); return block; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_attach_dmabuf, "IIO_DMA_BUFFER"); void iio_dma_buffer_detach_dmabuf(struct iio_buffer *buffer, struct iio_dma_buffer_block *block) { block->state = IIO_BLOCK_STATE_DEAD; iio_buffer_block_put_atomic(block); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_detach_dmabuf, "IIO_DMA_BUFFER"); static int iio_dma_can_enqueue_block(struct iio_dma_buffer_block *block) { struct iio_dma_buffer_queue *queue = block->queue; /* If in fileio mode buffers can't be enqueued. */ if (queue->fileio.enabled) return -EBUSY; switch (block->state) { case IIO_BLOCK_STATE_QUEUED: return -EPERM; case IIO_BLOCK_STATE_ACTIVE: case IIO_BLOCK_STATE_DEAD: return -EBUSY; case IIO_BLOCK_STATE_DONE: break; } return 0; } int iio_dma_buffer_enqueue_dmabuf(struct iio_buffer *buffer, struct iio_dma_buffer_block *block, struct dma_fence *fence, struct sg_table *sgt, size_t size, bool cyclic) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); bool cookie; int ret; WARN_ON(!mutex_is_locked(&queue->lock)); cookie = dma_fence_begin_signalling(); ret = iio_dma_can_enqueue_block(block); if (ret < 0) goto out_end_signalling; block->bytes_used = size; block->cyclic = cyclic; block->sg_table = sgt; block->fence = fence; iio_dma_buffer_enqueue(queue, block); out_end_signalling: dma_fence_end_signalling(cookie); return ret; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_enqueue_dmabuf, "IIO_DMA_BUFFER"); void iio_dma_buffer_lock_queue(struct iio_buffer *buffer) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); mutex_lock(&queue->lock); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_lock_queue, "IIO_DMA_BUFFER"); void iio_dma_buffer_unlock_queue(struct iio_buffer *buffer) { struct iio_dma_buffer_queue *queue = iio_buffer_to_queue(buffer); mutex_unlock(&queue->lock); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_unlock_queue, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_set_bytes_per_datum() - DMA buffer set_bytes_per_datum callback * @buffer: Buffer to set the bytes-per-datum for * @bpd: The new bytes-per-datum value * * Should be used as the set_bytes_per_datum callback for iio_buffer_access_ops * struct for DMA buffers. */ int iio_dma_buffer_set_bytes_per_datum(struct iio_buffer *buffer, size_t bpd) { buffer->bytes_per_datum = bpd; return 0; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_set_bytes_per_datum, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_set_length - DMA buffer set_length callback * @buffer: Buffer to set the length for * @length: The new buffer length * * Should be used as the set_length callback for iio_buffer_access_ops * struct for DMA buffers. */ int iio_dma_buffer_set_length(struct iio_buffer *buffer, unsigned int length) { /* Avoid an invalid state */ if (length < 2) length = 2; buffer->length = length; buffer->watermark = length / 2; return 0; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_set_length, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_init() - Initialize DMA buffer queue * @queue: Buffer to initialize * @dev: DMA device * @ops: DMA buffer queue callback operations * * The DMA device will be used by the queue to do DMA memory allocations. So it * should refer to the device that will perform the DMA to ensure that * allocations are done from a memory region that can be accessed by the device. */ int iio_dma_buffer_init(struct iio_dma_buffer_queue *queue, struct device *dev, const struct iio_dma_buffer_ops *ops) { iio_buffer_init(&queue->buffer); queue->buffer.length = PAGE_SIZE; queue->buffer.watermark = queue->buffer.length / 2; queue->dev = dev; queue->ops = ops; INIT_LIST_HEAD(&queue->incoming); mutex_init(&queue->lock); spin_lock_init(&queue->list_lock); return 0; } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_init, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_exit() - Cleanup DMA buffer queue * @queue: Buffer to cleanup * * After this function has completed it is safe to free any resources that are * associated with the buffer and are accessed inside the callback operations. */ void iio_dma_buffer_exit(struct iio_dma_buffer_queue *queue) { mutex_lock(&queue->lock); iio_dma_buffer_fileio_free(queue); queue->ops = NULL; mutex_unlock(&queue->lock); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_exit, "IIO_DMA_BUFFER"); /** * iio_dma_buffer_release() - Release final buffer resources * @queue: Buffer to release * * Frees resources that can't yet be freed in iio_dma_buffer_exit(). Should be * called in the buffers release callback implementation right before freeing * the memory associated with the buffer. */ void iio_dma_buffer_release(struct iio_dma_buffer_queue *queue) { mutex_destroy(&queue->lock); } EXPORT_SYMBOL_NS_GPL(iio_dma_buffer_release, "IIO_DMA_BUFFER"); MODULE_AUTHOR("Lars-Peter Clausen "); MODULE_DESCRIPTION("DMA buffer for the IIO framework"); MODULE_LICENSE("GPL v2");