# SPDX-License-Identifier: GPL-2.0-only menuconfig MODULES bool "Enable loadable module support" modules select EXECMEM help Kernel modules are small pieces of compiled code which can be inserted in the running kernel, rather than being permanently built into the kernel. You use the "modprobe" tool to add (and sometimes remove) them. If you say Y here, many parts of the kernel can be built as modules (by answering M instead of Y where indicated): this is most useful for infrequently used options which are not required for booting. For more information, see the man pages for modprobe, lsmod, modinfo, insmod and rmmod. If you say Y here, you will need to run "make modules_install" to put the modules under /lib/modules/ where modprobe can find them (you may need to be root to do this). If unsure, say Y. if MODULES config MODULE_DEBUGFS bool config MODULE_DEBUG bool "Module debugging" depends on DEBUG_FS help Allows you to enable / disable features which can help you debug modules. You don't need these options on production systems. if MODULE_DEBUG config MODULE_STATS bool "Module statistics" depends on DEBUG_FS select MODULE_DEBUGFS help This option allows you to maintain a record of module statistics. For example, size of all modules, average size, text size, a list of failed modules and the size for each of those. For failed modules we keep track of modules which failed due to either the existing module taking too long to load or that module was already loaded. You should enable this if you are debugging production loads and want to see if userspace or the kernel is doing stupid things with loading modules when it shouldn't or if you want to help optimize userspace / kernel space module autoloading schemes. You might want to do this because failed modules tend to use up significant amount of memory, and so you'd be doing everyone a favor in avoiding these failures proactively. This functionality is also useful for those experimenting with module .text ELF section optimization. If unsure, say N. config MODULE_DEBUG_AUTOLOAD_DUPS bool "Debug duplicate modules with auto-loading" help Module autoloading allows in-kernel code to request modules through the *request_module*() API calls. This in turn just calls userspace modprobe. Although modprobe checks to see if a module is already loaded before trying to load a module there is a small time window in which multiple duplicate requests can end up in userspace and multiple modprobe calls race calling finit_module() around the same time for duplicate modules. The finit_module() system call can consume in the worst case more than twice the respective module size in virtual memory for each duplicate module requests. Although duplicate module requests are non-fatal virtual memory is a limited resource and each duplicate module request ends up just unnecessarily straining virtual memory. This debugging facility will create pr_warn() splats for duplicate module requests to help identify if module auto-loading may be the culprit to your early boot virtual memory pressure. Since virtual memory abuse caused by duplicate module requests could render a system unusable this functionality will also converge races in requests for the same module to a single request. You can boot with the module.enable_dups_trace=1 kernel parameter to use WARN_ON() instead of the pr_warn(). If the first module request used request_module_nowait() we cannot use that as the anchor to wait for duplicate module requests, since users of request_module() do want a proper return value. If a call for the same module happened earlier with request_module() though, then a duplicate request_module_nowait() would be detected. The non-wait request_module() call is synchronous and waits until modprobe completes. Subsequent auto-loading requests for the same module do not trigger a new finit_module() calls and do not strain virtual memory, and so as soon as modprobe successfully completes we remove tracking for duplicates for that module. Enable this functionality to try to debug virtual memory abuse during boot on systems which are failing to boot or if you suspect you may be straining virtual memory during boot, and you want to identify if the abuse was due to module auto-loading. These issues are currently only known to occur on systems with many CPUs (over 400) and is likely the result of udev issuing duplicate module requests for each CPU, and so module auto-loading is not the culprit. There may very well still be many duplicate module auto-loading requests which could be optimized for and this debugging facility can be used to help identify them. Only enable this for debugging system functionality, never have it enabled on real systems. config MODULE_DEBUG_AUTOLOAD_DUPS_TRACE bool "Force full stack trace when duplicates are found" depends on MODULE_DEBUG_AUTOLOAD_DUPS help Enabling this will force a full stack trace for duplicate module auto-loading requests using WARN_ON() instead of pr_warn(). You should keep this disabled at all times unless you are a developer and are doing a manual inspection and want to debug exactly why these duplicates occur. endif # MODULE_DEBUG config MODULE_FORCE_LOAD bool "Forced module loading" default n help Allow loading of modules without version information (ie. modprobe --force). Forced module loading sets the 'F' (forced) taint flag and is usually a really bad idea. config MODULE_UNLOAD bool "Module unloading" help Without this option you will not be able to unload any modules (note that some modules may not be unloadable anyway), which makes your kernel smaller, faster and simpler. If unsure, say Y. config MODULE_FORCE_UNLOAD bool "Forced module unloading" depends on MODULE_UNLOAD help This option allows you to force a module to unload, even if the kernel believes it is unsafe: the kernel will remove the module without waiting for anyone to stop using it (using the -f option to rmmod). This is mainly for kernel developers and desperate users. If unsure, say N. config MODULE_UNLOAD_TAINT_TRACKING bool "Tainted module unload tracking" depends on MODULE_UNLOAD select MODULE_DEBUGFS help This option allows you to maintain a record of each unloaded module that tainted the kernel. In addition to displaying a list of linked (or loaded) modules e.g. on detection of a bad page (see bad_page()), the aforementioned details are also shown. If unsure, say N. config MODVERSIONS bool "Module versioning support" depends on !COMPILE_TEST help Usually, you have to use modules compiled with your kernel. Saying Y here makes it sometimes possible to use modules compiled for different kernels, by adding enough information to the modules to (hopefully) spot any changes which would make them incompatible with the kernel you are running. If unsure, say N. config ASM_MODVERSIONS bool default HAVE_ASM_MODVERSIONS && MODVERSIONS help This enables module versioning for exported symbols also from assembly. This can be enabled only when the target architecture supports it. config MODULE_SRCVERSION_ALL bool "Source checksum for all modules" help Modules which contain a MODULE_VERSION get an extra "srcversion" field inserted into their modinfo section, which contains a sum of the source files which made it. This helps maintainers see exactly which source was used to build a module (since others sometimes change the module source without updating the version). With this option, such a "srcversion" field will be created for all modules. If unsure, say N. config MODULE_SIG bool "Module signature verification" select MODULE_SIG_FORMAT help Check modules for valid signatures upon load: the signature is simply appended to the module. For more information see . Note that this option adds the OpenSSL development packages as a kernel build dependency so that the signing tool can use its crypto library. You should enable this option if you wish to use either CONFIG_SECURITY_LOCKDOWN_LSM or lockdown functionality imposed via another LSM - otherwise unsigned modules will be loadable regardless of the lockdown policy. !!!WARNING!!! If you enable this option, you MUST make sure that the module DOES NOT get stripped after being signed. This includes the debuginfo strip done by some packagers (such as rpmbuild) and inclusion into an initramfs that wants the module size reduced. config MODULE_SIG_FORCE bool "Require modules to be validly signed" depends on MODULE_SIG help Reject unsigned modules or signed modules for which we don't have a key. Without this, such modules will simply taint the kernel. config MODULE_SIG_ALL bool "Automatically sign all modules" default y depends on MODULE_SIG || IMA_APPRAISE_MODSIG help Sign all modules during make modules_install. Without this option, modules must be signed manually, using the scripts/sign-file tool. comment "Do not forget to sign required modules with scripts/sign-file" depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL choice prompt "Hash algorithm to sign modules" depends on MODULE_SIG || IMA_APPRAISE_MODSIG help This determines which sort of hashing algorithm will be used during signature generation. This algorithm _must_ be built into the kernel directly so that signature verification can take place. It is not possible to load a signed module containing the algorithm to check the signature on that module. config MODULE_SIG_SHA1 bool "SHA-1" select CRYPTO_SHA1 config MODULE_SIG_SHA256 bool "SHA-256" select CRYPTO_SHA256 config MODULE_SIG_SHA384 bool "SHA-384" select CRYPTO_SHA512 config MODULE_SIG_SHA512 bool "SHA-512" select CRYPTO_SHA512 config MODULE_SIG_SHA3_256 bool "SHA3-256" select CRYPTO_SHA3 config MODULE_SIG_SHA3_384 bool "SHA3-384" select CRYPTO_SHA3 config MODULE_SIG_SHA3_512 bool "SHA3-512" select CRYPTO_SHA3 endchoice config MODULE_SIG_HASH string depends on MODULE_SIG || IMA_APPRAISE_MODSIG default "sha1" if MODULE_SIG_SHA1 default "sha256" if MODULE_SIG_SHA256 default "sha384" if MODULE_SIG_SHA384 default "sha512" if MODULE_SIG_SHA512 default "sha3-256" if MODULE_SIG_SHA3_256 default "sha3-384" if MODULE_SIG_SHA3_384 default "sha3-512" if MODULE_SIG_SHA3_512 config MODULE_COMPRESS bool "Module compression" help Enable module compression to reduce on-disk size of module binaries. This is fully compatible with signed modules. The tool used to work with modules needs to support the selected compression type. kmod MAY support gzip, xz and zstd. Other tools might have a limited selection of the supported types. Note that for modules inside an initrd or initramfs, it's more efficient to compress the whole ramdisk instead. If unsure, say N. choice prompt "Module compression type" depends on MODULE_COMPRESS help Choose the supported algorithm for module compression. config MODULE_COMPRESS_GZIP bool "GZIP" help Support modules compressed with GZIP. The installed modules are suffixed with .ko.gz. config MODULE_COMPRESS_XZ bool "XZ" help Support modules compressed with XZ. The installed modules are suffixed with .ko.xz. config MODULE_COMPRESS_ZSTD bool "ZSTD" help Support modules compressed with ZSTD. The installed modules are suffixed with .ko.zst. endchoice config MODULE_COMPRESS_ALL bool "Automatically compress all modules" default y depends on MODULE_COMPRESS help Compress all modules during 'make modules_install'. Your build system needs to provide the appropriate compression tool for the selected compression type. External modules will also be compressed in the same way during the installation. config MODULE_DECOMPRESS bool "Support in-kernel module decompression" depends on MODULE_COMPRESS select ZLIB_INFLATE if MODULE_COMPRESS_GZIP select XZ_DEC if MODULE_COMPRESS_XZ select ZSTD_DECOMPRESS if MODULE_COMPRESS_ZSTD help Support for decompressing kernel modules by the kernel itself instead of relying on userspace to perform this task. Useful when load pinning security policy is enabled. If unsure, say N. config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS bool "Allow loading of modules with missing namespace imports" help Symbols exported with EXPORT_SYMBOL_NS*() are considered exported in a namespace. A module that makes use of a symbol exported with such a namespace is required to import the namespace via MODULE_IMPORT_NS(""). There is no technical reason to enforce correct namespace imports, but it creates consistency between symbols defining namespaces and users importing namespaces they make use of. This option relaxes this requirement and lifts the enforcement when loading a module. If unsure, say N. config MODPROBE_PATH string "Path to modprobe binary" default "/sbin/modprobe" help When kernel code requests a module, it does so by calling the "modprobe" userspace utility. This option allows you to set the path where that binary is found. This can be changed at runtime via the sysctl file /proc/sys/kernel/modprobe. Setting this to the empty string removes the kernel's ability to request modules (but userspace can still load modules explicitly). config TRIM_UNUSED_KSYMS bool "Trim unused exported kernel symbols" help The kernel and some modules make many symbols available for other modules to use via EXPORT_SYMBOL() and variants. Depending on the set of modules being selected in your kernel configuration, many of those exported symbols might never be used. This option allows for unused exported symbols to be dropped from the build. In turn, this provides the compiler more opportunities (especially when using LTO) for optimizing the code and reducing binary size. This might have some security advantages as well. If unsure, or if you need to build out-of-tree modules, say N. config UNUSED_KSYMS_WHITELIST string "Whitelist of symbols to keep in ksymtab" depends on TRIM_UNUSED_KSYMS help By default, all unused exported symbols will be un-exported from the build when TRIM_UNUSED_KSYMS is selected. UNUSED_KSYMS_WHITELIST allows to whitelist symbols that must be kept exported at all times, even in absence of in-tree users. The value to set here is the path to a text file containing the list of symbols, one per line. The path can be absolute, or relative to the kernel source or obj tree. config MODULES_TREE_LOOKUP def_bool y depends on PERF_EVENTS || TRACING || CFI_CLANG endif # MODULES