# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright 2024 Analog Devices Inc.
# Copyright 2024 BayLibre, SAS.
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad4030.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Analog Devices AD4030 and AD4630 ADC families

maintainers:
  - Michael Hennerich <michael.hennerich@analog.com>
  - Nuno Sa <nuno.sa@analog.com>

description: |
  Analog Devices AD4030 single channel and AD4630/AD4632 dual channel precision
  SAR ADC families

  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4030-24-4032-24.pdf
  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-24_ad4632-24.pdf
  * https://www.analog.com/media/en/technical-documentation/data-sheets/ad4630-16-4632-16.pdf

properties:
  compatible:
    enum:
      - adi,ad4030-24
      - adi,ad4032-24
      - adi,ad4630-16
      - adi,ad4630-24
      - adi,ad4632-16
      - adi,ad4632-24

  reg:
    maxItems: 1

  spi-max-frequency:
    maximum: 102040816

  spi-rx-bus-width:
    enum: [1, 2, 4]

  vdd-5v-supply: true
  vdd-1v8-supply: true
  vio-supply: true

  ref-supply:
    description:
      Optional External unbuffered reference. Used when refin-supply is not
      connected.

  refin-supply:
    description:
      Internal buffered Reference. Used when ref-supply is not connected.

  cnv-gpios:
    description:
      The Convert Input (CNV). It initiates the sampling conversions.
    maxItems: 1

  reset-gpios:
    description:
      The Reset Input (/RST). Used for asynchronous device reset.
    maxItems: 1

  interrupts:
    description:
      The BUSY pin is used to signal that the conversions results are available
      to be transferred when in SPI Clocking Mode. This nodes should be
      connected to an interrupt that is triggered when the BUSY line goes low.
    maxItems: 1

  interrupt-names:
    const: busy

required:
  - compatible
  - reg
  - vdd-5v-supply
  - vdd-1v8-supply
  - vio-supply
  - cnv-gpios

oneOf:
  - required:
      - ref-supply
  - required:
      - refin-supply

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    spi {
        #address-cells = <1>;
        #size-cells = <0>;

        adc@0 {
            compatible = "adi,ad4030-24";
            reg = <0>;
            spi-max-frequency = <80000000>;
            vdd-5v-supply = <&supply_5V>;
            vdd-1v8-supply = <&supply_1_8V>;
            vio-supply = <&supply_1_8V>;
            ref-supply = <&supply_5V>;
            cnv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
        };
    };