# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/input/touchscreen/eeti,exc3000.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: EETI EXC3000 series touchscreen controller maintainers: - Dmitry Torokhov properties: compatible: oneOf: - const: eeti,exc3000 - const: eeti,exc80h60 - const: eeti,exc80h84 - const: eeti,egalax_ts # Do NOT use for new binding - const: eeti,exc3000-i2c deprecated: true - items: - enum: - eeti,exc81w32 - const: eeti,exc80h84 reg: enum: [0x4, 0xa, 0x2a] interrupts: maxItems: 1 reset-gpios: maxItems: 1 wakeup-gpios: maxItems: 1 vdd-supply: description: Power supply regulator for the chip attn-gpios: deprecated: true maxItems: 1 description: Phandle to a GPIO to check whether interrupt is still latched. This is necessary for platforms that lack support for level-triggered IRQs. touchscreen-size-x: true touchscreen-size-y: true touchscreen-inverted-x: true touchscreen-inverted-y: true touchscreen-swapped-x-y: true required: - compatible - reg - interrupts additionalProperties: false allOf: - $ref: touchscreen.yaml# - if: properties: compatible: not: contains: enum: - eeti,egalax_ts - eeti,exc3000-i2c then: properties: reg: const: 0x2a wakeup-gpios: false attn-gpios: false required: - touchscreen-size-x - touchscreen-size-y examples: - | #include "dt-bindings/interrupt-controller/irq.h" i2c { #address-cells = <1>; #size-cells = <0>; touchscreen@2a { compatible = "eeti,exc3000"; reg = <0x2a>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_LEVEL_LOW>; touchscreen-size-x = <4096>; touchscreen-size-y = <4096>; touchscreen-inverted-x; touchscreen-swapped-x-y; }; };