# SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: X-Powers AXP PMIC maintainers: - Chen-Yu Tsai allOf: - if: properties: compatible: contains: enum: - x-powers,axp152 - x-powers,axp202 - x-powers,axp209 then: properties: regulators: properties: x-powers,dcdc-freq: minimum: 750 maximum: 1875 default: 1500 else: properties: regulators: properties: x-powers,dcdc-freq: minimum: 1800 maximum: 4050 default: 3000 - if: properties: compatible: contains: enum: - x-powers,axp152 - x-powers,axp202 - x-powers,axp209 then: properties: x-powers,drive-vbus-en: false - if: not: properties: compatible: contains: const: x-powers,axp806 then: properties: x-powers,self-working-mode: false x-powers,master-mode: false - if: not: properties: compatible: contains: enum: - x-powers,axp15060 - x-powers,axp305 - x-powers,axp313a - x-powers,axp323 then: required: - interrupts - if: properties: compatible: contains: enum: - x-powers,axp313a - x-powers,axp323 - x-powers,axp15060 - x-powers,axp717 then: properties: x-powers,dcdc-freq: false properties: compatible: oneOf: - enum: - x-powers,axp152 - x-powers,axp192 - x-powers,axp202 - x-powers,axp209 - x-powers,axp221 - x-powers,axp223 - x-powers,axp313a - x-powers,axp323 - x-powers,axp717 - x-powers,axp803 - x-powers,axp806 - x-powers,axp809 - x-powers,axp813 - x-powers,axp15060 - items: - const: x-powers,axp228 - const: x-powers,axp221 - items: - const: x-powers,axp805 - const: x-powers,axp806 - items: - const: x-powers,axp305 - const: x-powers,axp805 - const: x-powers,axp806 - items: - const: x-powers,axp818 - const: x-powers,axp813 reg: maxItems: 1 interrupts: maxItems: 1 interrupt-controller: true "#interrupt-cells": const: 1 x-powers,drive-vbus-en: type: boolean description: > Set this when the N_VBUSEN pin is used as an output pin to control an external regulator to drive the OTG VBus, rather then as an input pin which signals whether the board is driving OTG VBus or not. x-powers,self-working-mode: type: boolean description: > Set this when the PMIC is wired for self-working mode through the MODESET pin. x-powers,master-mode: type: boolean description: > Set this when the PMIC is wired for master mode through the MODESET pin. vin1-supply: description: > DCDC1 power supply node, if present. vin2-supply: description: > DCDC2 power supply node, if present. vin3-supply: description: > DCDC3 power supply node, if present. vin4-supply: description: > DCDC4 power supply node, if present. vin5-supply: description: > DCDC5 power supply node, if present. vin6-supply: description: > DCDC6 power supply node, if present. vin7-supply: description: > DCDC7 power supply node, if present. vina-supply: description: > DCDCA power supply node, if present. vinb-supply: description: > DCDCB power supply node, if present. vinc-supply: description: > DCDCC power supply node, if present. vind-supply: description: > DCDCD power supply node, if present. vine-supply: description: > DCDCE power supply node, if present. acin-supply: description: > LDO1 power supply node, if present. ldo24in-supply: description: > LDO2 and LDO4 power supply node, if present. ldo3in-supply: description: > LDO3 power supply node, if present. ldo5in-supply: description: > LDO5 power supply node, if present. aldoin-supply: description: > ALDO* power supply node, if present. bldoin-supply: description: > BLDO* power supply node, if present. cldoin-supply: description: > CLDO* power supply node, if present. dldoin-supply: description: > DLDO* power supply node, if present. eldoin-supply: description: > ELDO* power supply node, if present. fldoin-supply: description: > FLDO* power supply node, if present. ips-supply: description: > LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. drivevbus-supply: description: > DRIVEVBUS power supply node, if present. swin-supply: description: > SW power supply node, if present. adc: $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# gpio: $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# ac-power: $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# battery-power: $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# usb-power: $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# regulators: type: object properties: x-powers,dcdc-freq: $ref: /schemas/types.yaml#/definitions/uint32 description: > Defines the work frequency of DC-DC in kHz. patternProperties: "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo|boost)$": $ref: /schemas/regulator/regulator.yaml# type: object unevaluatedProperties: false properties: regulator-ramp-delay: description: > Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on the AXP209. regulator-soft-start: description: > Only valid for the LDO3 regulator. x-powers,dcdc-workmode: $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: > Only valid for DCDC regulators. Setup 1 for PWM mode, 0 for AUTO (PWM/PFM) mode. The DCDC regulators work in a mixed PWM/PFM mode, using PFM under light loads and switching to PWM for heavier loads. Forcing PWM mode trades efficiency under light loads for lower output noise. This probably makes sense for HiFi audio related applications that aren't battery constrained. additionalProperties: false required: - compatible - reg - "#interrupt-cells" - interrupt-controller additionalProperties: false examples: - | i2c { #address-cells = <1>; #size-cells = <0>; pmic@30 { compatible = "x-powers,axp152"; reg = <0x30>; interrupts = <0>; interrupt-controller; #interrupt-cells = <1>; }; }; - | #include i2c { #address-cells = <1>; #size-cells = <0>; pmic@34 { compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; ac_power_supply: ac-power { compatible = "x-powers,axp202-ac-power-supply"; }; axp_adc: adc { compatible = "x-powers,axp209-adc"; #io-channel-cells = <1>; }; axp_gpio: gpio { compatible = "x-powers,axp209-gpio"; gpio-controller; #gpio-cells = <2>; gpio0-adc-pin { pins = "GPIO0"; function = "adc"; }; }; battery_power_supply: battery-power { compatible = "x-powers,axp209-battery-power-supply"; }; regulators { /* Default work frequency for buck regulators */ x-powers,dcdc-freq = <1500>; reg_dcdc2: dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1450000>; regulator-name = "vdd-cpu"; }; reg_dcdc3: dcdc3 { regulator-always-on; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; regulator-name = "vdd-int-dll"; }; reg_ldo1: ldo1 { /* LDO1 is a fixed output regulator */ regulator-always-on; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; regulator-name = "vdd-rtc"; }; reg_ldo2: ldo2 { regulator-always-on; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; reg_ldo3: ldo3 { regulator-name = "ldo3"; }; reg_ldo4: ldo4 { regulator-name = "ldo4"; }; reg_ldo5: ldo5 { regulator-name = "ldo5"; }; }; usb_power_supply: usb-power { compatible = "x-powers,axp202-usb-power-supply"; }; }; };