# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/pci/fsl,mpc8xxx-pci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale MPC83xx PCI/PCI-X/PCIe controllers description: Binding for the PCI/PCI-X/PCIe host bridges on MPC8xxx SoCs maintainers: - J. Neuschäfer allOf: - $ref: /schemas/pci/pci-host-bridge.yaml# properties: compatible: oneOf: - enum: - fsl,mpc8314-pcie - fsl,mpc8349-pci - fsl,mpc8540-pci - fsl,mpc8548-pcie - fsl,mpc8641-pcie - items: - enum: - fsl,mpc8308-pcie - fsl,mpc8315-pcie - fsl,mpc8377-pcie - fsl,mpc8378-pcie - const: fsl,mpc8314-pcie - items: - const: fsl,mpc8360-pci - const: fsl,mpc8349-pci - items: - const: fsl,mpc8540-pcix - const: fsl,mpc8540-pci reg: minItems: 1 items: - description: internal registers - description: config space access registers clock-frequency: true interrupts: items: - description: Consolidated PCI interrupt fsl,pci-agent-force-enum: type: boolean description: Typically any Freescale PCI-X bridge hardware strapped into Agent mode is prevented from enumerating the bus. The PrPMC form-factor requires all mezzanines to be PCI-X Agents, but one per system may still enumerate the bus. This property allows a PCI-X bridge to be used for bus enumeration despite being strapped into Agent mode. required: - reg - compatible unevaluatedProperties: false examples: - | #include pcie@e0009000 { compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; reg = <0xe0009000 0x00001000>; ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; device_type = "pci"; bus-range = <0 255>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0 0 0 1 &ipic 1 IRQ_TYPE_LEVEL_LOW 0 0 0 2 &ipic 1 IRQ_TYPE_LEVEL_LOW 0 0 0 3 &ipic 1 IRQ_TYPE_LEVEL_LOW 0 0 0 4 &ipic 1 IRQ_TYPE_LEVEL_LOW>; clock-frequency = <0>; }; - | pci@ef008000 { compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; reg = <0xef008000 0x1000>; ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; clock-frequency = <33333333>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = ; interrupts-extended = <&mpic 24 2>; bus-range = <0 0>; fsl,pci-agent-force-enum; }; ...