// SPDX-License-Identifier: GPL-2.0+ // // Copyright 2012 Freescale Semiconductor, Inc. // Copyright 2011 Linaro Ltd. #include #include #include / { chosen { stdout-path = &uart1; }; memory@10000000 { device_type = "memory"; reg = <0x10000000 0x40000000>; }; reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&swbst_reg>; }; reg_usb_h1_vbus: regulator-usb-h1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&swbst_reg>; }; reg_audio: regulator-audio { compatible = "regulator-fixed"; regulator-name = "wm8962-supply"; gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_pcie: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; regulator-name = "MPCIE_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; reg_sensors: regulator-sensors { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sensors_reg>; regulator-name = "sensors-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; enable-active-high; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = ; }; volume-up { label = "Volume Up"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = ; }; volume-down { label = "Volume Down"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; wakeup-source; linux,code = ; }; }; sound { compatible = "fsl,imx6q-sabresd-wm8962", "fsl,imx-audio-wm8962"; model = "wm8962-audio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hp>; ssi-controller = <&ssi2>; audio-codec = <&codec>; audio-asrc = <&asrc>; audio-routing = "Headphone Jack", "HPOUTL", "Headphone Jack", "HPOUTR", "Ext Spk", "SPKOUTL", "Ext Spk", "SPKOUTR", "AMIC", "MICBIAS", "IN3R", "AMIC", "DMIC", "MICBIAS", "DMICDAT", "DMIC"; mux-int-port = <2>; mux-ext-port = <3>; hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>; mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>; }; backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <7>; status = "okay"; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; led-red { gpios = <&gpio1 2 0>; default-state = "on"; }; }; panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; port { panel_in: endpoint { remote-endpoint = <&lvds0_out>; }; }; }; }; &ipu1_csi0_from_ipu1_csi0_mux { bus-width = <8>; data-shift = <12>; /* Lines 19:12 used */ hsync-active = <1>; vsync-active = <1>; }; &ipu1_csi0_mux_from_parallel_sensor { remote-endpoint = <&ov5642_to_ipu1_csi0_mux>; }; &ipu1_csi0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ipu1_csi0>; }; &mipi_csi { status = "okay"; port@0 { reg = <0>; mipi_csi2_in: endpoint { remote-endpoint = <&ov5640_to_mipi_csi2>; clock-lanes = <0>; data-lanes = <1 2>; }; }; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &ecspi1 { cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi1>; status = "okay"; flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; }; &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; phy-handle = <&phy>; fsl,magic-packet; status = "okay"; mdio { #address-cells = <1>; #size-cells = <0>; phy: ethernet-phy@1 { reg = <1>; qca,clk-out-frequency = <125000000>; reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; reset-assert-us = <10000>; }; }; }; &hdmi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hdmi_cec>; ddc-i2c-bus = <&i2c2>; status = "okay"; }; &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; reg = <0x1a>; clocks = <&clks IMX6QDL_CLK_CKO>; DCVDD-supply = <®_audio>; DBVDD-supply = <®_audio>; AVDD-supply = <®_audio>; CPVDD-supply = <®_audio>; MICVDD-supply = <®_audio>; PLLVDD-supply = <®_audio>; SPKVDD1-supply = <®_audio>; SPKVDD2-supply = <®_audio>; gpio-cfg = < 0x0000 /* 0:Default */ 0x0000 /* 1:Default */ 0x0013 /* 2:FN_DMICCLK */ 0x0000 /* 3:Default */ 0x8014 /* 4:FN_DMICCDAT */ 0x0000 /* 5:Default */ >; }; accelerometer@1c { compatible = "fsl,mma8451"; reg = <0x1c>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1_mma8451_int>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <®_sensors>; vddio-supply = <®_sensors>; }; ov5642: camera@3c { compatible = "ovti,ov5642"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO>; clock-names = "xclk"; reg = <0x3c>; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 rev B board is VGEN5 */ DVDD-supply = <&vgen2_reg>; /* 1.5v*/ powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; status = "disabled"; port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; }; }; }; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2_egalax_int>; interrupt-parent = <&gpio6>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>; }; ov5640: camera@3c { compatible = "ovti,ov5640"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5640>; reg = <0x3c>; clocks = <&clks IMX6QDL_CLK_CKO>; clock-names = "xclk"; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 rev B board is VGEN5 */ DVDD-supply = <&vgen2_reg>; /* 1.5v*/ powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; port { ov5640_to_mipi_csi2: endpoint { remote-endpoint = <&mipi_csi2_in>; clock-lanes = <0>; data-lanes = <1 2>; }; }; }; pmic: pmic@8 { compatible = "fsl,pfuze100"; reg = <0x08>; regulators { sw1a_reg: sw1ab { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw1c_reg: sw1c { regulator-min-microvolt = <300000>; regulator-max-microvolt = <1875000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw2_reg: sw2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <6250>; }; sw3a_reg: sw3a { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw3b_reg: sw3b { regulator-min-microvolt = <400000>; regulator-max-microvolt = <1975000>; regulator-boot-on; regulator-always-on; }; sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; swbst_reg: swbst { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5150000>; }; snvs_reg: vsnvs { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; regulator-boot-on; regulator-always-on; }; vref_reg: vrefddr { regulator-boot-on; regulator-always-on; }; vgen1_reg: vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen2_reg: vgen2 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; }; vgen3_reg: vgen3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen5_reg: vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; vgen6_reg: vgen6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; }; }; }; &i2c3 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; egalax_ts@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio6>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; }; magnetometer@e { compatible = "fsl,mag3110"; reg = <0x0e>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_mag3110_int>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_RISING>; vdd-supply = <®_sensors>; vddio-supply = <®_sensors>; }; light-sensor@44 { compatible = "isil,isl29023"; reg = <0x44>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3_isl29023_int>; interrupt-parent = <&gpio3>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <®_sensors>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 >; }; pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 >; }; pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; }; pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; pinctrl_gpio_keys: gpio_keysgrp { fsl,pins = < MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 >; }; pinctrl_hdmi_cec: hdmicecgrp { fsl,pins = < MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 >; }; pinctrl_hp: hpgrp { fsl,pins = < MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; pinctrl_i2c1: i2c1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 >; }; pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp { fsl,pins = < MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0xb0b1 >; }; pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; pinctrl_i2c2_egalax_int: i2c2egalaxintgrp { fsl,pins = < MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 >; }; pinctrl_i2c3: i2c3grp { fsl,pins = < MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 >; }; pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp { fsl,pins = < MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0xb0b1 >; }; pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp { fsl,pins = < MX6QDL_PAD_EIM_D16__GPIO3_IO16 0xb0b1 >; }; pinctrl_ipu1_csi0: ipu1csi0grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 >; }; pinctrl_ov5640: ov5640grp { fsl,pins = < MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 >; }; pinctrl_ov5642: ov5642grp { fsl,pins = < MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 >; }; pinctrl_pcie: pciegrp { fsl,pins = < MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 >; }; pinctrl_pcie_reg: pciereggrp { fsl,pins = < MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 >; }; pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 >; }; pinctrl_sensors_reg: sensorsreggrp { fsl,pins = < MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b0 >; }; pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 MX6QDL_PAD_NANDF_D4__SD2_DATA4 0x17059 MX6QDL_PAD_NANDF_D5__SD2_DATA5 0x17059 MX6QDL_PAD_NANDF_D6__SD2_DATA6 0x17059 MX6QDL_PAD_NANDF_D7__SD2_DATA7 0x17059 >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; pinctrl_usdhc4: usdhc4grp { fsl,pins = < MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 >; }; pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 >; }; }; &ldb { status = "okay"; lvds-channel@1 { fsl,data-mapping = "spwg"; fsl,data-width = <18>; status = "okay"; port@4 { reg = <4>; lvds0_out: endpoint { remote-endpoint = <&panel_in>; }; }; }; }; &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie>; status = "okay"; }; &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; status = "okay"; }; ®_arm { vin-supply = <&sw1a_reg>; }; ®_pu { vin-supply = <&sw1c_reg>; }; ®_soc { vin-supply = <&sw1c_reg>; }; ®_vdd1p1 { vin-supply = <&vgen5_reg>; }; ®_vdd2p5 { vin-supply = <&vgen5_reg>; }; &snvs_poweroff { status = "okay"; }; &snvs_pwrkey { status = "okay"; }; &ssi2 { status = "okay"; }; &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &usbh1 { vbus-supply = <®_usb_h1_vbus>; status = "okay"; }; &usbotg { vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; status = "okay"; }; &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; non-removable; no-1-8-v; status = "okay"; }; &wdog1 { status = "disabled"; }; &wdog2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; };