// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

#include "bcm4906.dtsi"

/ {
	compatible = "zyxel,ex3510b", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
	model = "Zyxel EX3510-B";

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x20000000>;
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		poll-interval = <100>;

		key-wps {
			label = "WPS";
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
		};

		key-reset {
			label = "Reset";
			linux,code = <KEY_RESTART>;
			gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
		};
	};
};

&leds {
	pinctrl-0 = <&pins_led_0_a>, <&pins_led_2_a>, <&pins_led_3_a>,
		    <&pins_led_4_a>, <&pins_led_10_a>, <&pins_led_12_a>,
		    <&pins_led_14_a>, <&pins_led_15_a>, <&pins_led_21_a>;
	pinctrl-names = "default";

	led@0 {
		reg = <0x0>;
		function = LED_FUNCTION_POWER;
		color = <LED_COLOR_ID_RED>;
	};

	led@2 {
		reg = <0x2>;
		function = LED_FUNCTION_WAN_ONLINE;
		color = <LED_COLOR_ID_GREEN>;
	};

	led@3 {
		reg = <0x3>;
		function = LED_FUNCTION_WAN_ONLINE;
		color = <LED_COLOR_ID_RED>;
	};

	led@4 {
		reg = <0x4>;
		function = LED_FUNCTION_USB;
		color = <LED_COLOR_ID_GREEN>;
		trigger-sources = <&ohci_port1>, <&ohci_port2>,
				  <&ehci_port1>, <&ehci_port2>,
				  <&xhci_port1>, <&xhci_port2>;
		linux,default-trigger = "usbport";
	};

	led@a {
		reg = <0xa>;
		function = LED_FUNCTION_POWER;
		color = <LED_COLOR_ID_GREEN>;
		linux,default-trigger = "default-on";
	};

	led@c {
		reg = <0xc>;
		function = LED_FUNCTION_LAN;
		color = <LED_COLOR_ID_GREEN>;
		active-low;
	};

	led@e {
		reg = <0xe>;
		function = LED_FUNCTION_WPS;
		color = <LED_COLOR_ID_GREEN>;
		active-low;
	};

	led@f {
		reg = <0xf>;
		function = LED_FUNCTION_WPS;
		color = <LED_COLOR_ID_RED>;
		active-low;
	};

	led@15 {
		reg = <0x15>;
		function = LED_FUNCTION_WAN;
		color = <LED_COLOR_ID_GREEN>;
		active-low;
	};
};

&enet {
	nvmem-cells = <&base_mac_addr>;
	nvmem-cell-names = "mac-address";
};

&usb_phy {
	brcm,ioc = <1>;
	brcm,ipp = <1>;
	status = "okay";
};

&ehci {
	status = "okay";
};

&ohci {
	status = "okay";
};

&xhci {
	status = "okay";
};

&ports {
	port@0 {
		label = "lan1";
	};

	port@1 {
		label = "lan2";
	};

	port@2 {
		label = "lan3";
	};

	port@3 {
		label = "lan4";
	};

	port@7 {
		reg = <7>;
		phy-mode = "internal";
		phy-handle = <&phy12>;
		label = "wan";
	};
};

&nand_controller {
	status = "okay";
};

&nandcs {
	brcm,nand-oob-sector-size = <27>;
	nand-ecc-strength = <8>;
	nand-ecc-step-size = <512>;
	nand-on-flash-bbt;

	#address-cells = <1>;
	#size-cells = <0>;

	partitions {
		compatible = "brcm,bcm4908-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		partition@0 {
			compatible = "nvmem-cells";
			label = "cferom";
			reg = <0x0 0x100000>;
			read-only;

			#address-cells = <1>;
			#size-cells = <1>;

			base_mac_addr: mac@106a0 {
				reg = <0x106a0 0x6>;
			};
		};

		partition@100000 {
			compatible = "brcm,bcm4908-firmware";
			reg = <0x100000 0x5f80000>;
		};

		partition@6080000 {
			compatible = "brcm,bcm4908-firmware";
			reg = <0x6080000 0x5f80000>;
		};
	};
};