// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright 2019 NXP */ #include #include #include #include #include #include #include #include #include "imx8mp-pinfunc.h" / { interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; aliases { ethernet0 = &fec; ethernet1 = &eqos; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; i2c5 = &i2c6; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; spi0 = &flexspi; }; cpus { #address-cells = <1>; #size-cells = <0>; idle-states { entry-method = "psci"; cpu_pd_wait: cpu-pd-wait { compatible = "arm,idle-state"; arm,psci-suspend-param = <0x0010033>; local-timer-stop; entry-latency-us = <1000>; exit-latency-us = <700>; min-residency-us = <2700>; wakeup-latency-us = <1500>; }; }; A53_0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0>; clock-latency = <61036>; clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; nvmem-cells = <&cpu_speed_grade>; nvmem-cell-names = "speed_grade"; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; }; A53_1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x1>; clock-latency = <61036>; clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; }; A53_2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x2>; clock-latency = <61036>; clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; }; A53_3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x3>; clock-latency = <61036>; clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; i-cache-size = <0x8000>; i-cache-line-size = <64>; i-cache-sets = <256>; d-cache-size = <0x8000>; d-cache-line-size = <64>; d-cache-sets = <128>; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; }; A53_L2: l2-cache0 { compatible = "cache"; cache-unified; cache-level = <2>; cache-size = <0x80000>; cache-line-size = <64>; cache-sets = <512>; }; }; a53_opp_table: opp-table { compatible = "operating-points-v2"; opp-shared; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; opp-supported-hw = <0x8a0>, <0x7>; clock-latency-ns = <150000>; opp-suspend; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <950000>; opp-supported-hw = <0xa0>, <0x7>; clock-latency-ns = <150000>; opp-suspend; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1000000>; opp-supported-hw = <0x20>, <0x3>; clock-latency-ns = <150000>; opp-suspend; }; }; osc_32k: clock-osc-32k { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; clock-output-names = "osc_32k"; }; osc_24m: clock-osc-24m { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "osc_24m"; }; clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <133000000>; clock-output-names = "clk_ext1"; }; clk_ext2: clock-ext2 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <133000000>; clock-output-names = "clk_ext2"; }; clk_ext3: clock-ext3 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <133000000>; clock-output-names = "clk_ext3"; }; clk_ext4: clock-ext4 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <133000000>; clock-output-names = "clk_ext4"; }; funnel { /* * non-configurable funnel don't show up on the AMBA * bus. As such no need to add "arm,primecell". */ compatible = "arm,coresight-static-funnel"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; ca_funnel_in_port0: endpoint { remote-endpoint = <&etm0_out_port>; }; }; port@1 { reg = <1>; ca_funnel_in_port1: endpoint { remote-endpoint = <&etm1_out_port>; }; }; port@2 { reg = <2>; ca_funnel_in_port2: endpoint { remote-endpoint = <&etm2_out_port>; }; }; port@3 { reg = <3>; ca_funnel_in_port3: endpoint { remote-endpoint = <&etm3_out_port>; }; }; }; out-ports { port { ca_funnel_out_port0: endpoint { remote-endpoint = <&hugo_funnel_in_port0>; }; }; }; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; status = "disabled"; }; }; pmu { compatible = "arm,cortex-a53-pmu"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; thermal-zones { cpu-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tmu 0>; trips { cpu_alert0: trip0 { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; cpu_crit0: trip1 { temperature = <95000>; hysteresis = <2000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&cpu_alert0>; cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; soc-thermal { polling-delay-passive = <250>; polling-delay = <2000>; thermal-sensors = <&tmu 1>; trips { soc_alert0: trip0 { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; soc_crit0: trip1 { temperature = <95000>; hysteresis = <2000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&soc_alert0>; cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; clock-frequency = <8000000>; arm,no-tick-in-suspend; }; soc: soc@0 { compatible = "fsl,imx8mp-soc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0x3e000000>; nvmem-cells = <&imx8mp_uid>; nvmem-cell-names = "soc_unique_id"; etm0: etm@28440000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x28440000 0x1000>; cpu = <&A53_0>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; out-ports { port { etm0_out_port: endpoint { remote-endpoint = <&ca_funnel_in_port0>; }; }; }; }; etm1: etm@28540000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x28540000 0x1000>; cpu = <&A53_1>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; out-ports { port { etm1_out_port: endpoint { remote-endpoint = <&ca_funnel_in_port1>; }; }; }; }; etm2: etm@28640000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x28640000 0x1000>; cpu = <&A53_2>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; out-ports { port { etm2_out_port: endpoint { remote-endpoint = <&ca_funnel_in_port2>; }; }; }; }; etm3: etm@28740000 { compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0x28740000 0x1000>; cpu = <&A53_3>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; out-ports { port { etm3_out_port: endpoint { remote-endpoint = <&ca_funnel_in_port3>; }; }; }; }; funnel@28c03000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x28c03000 0x1000>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; hugo_funnel_in_port0: endpoint { remote-endpoint = <&ca_funnel_out_port0>; }; }; port@1 { reg = <1>; hugo_funnel_in_port1: endpoint { /* M7 input */ }; }; port@2 { reg = <2>; hugo_funnel_in_port2: endpoint { /* DSP input */ }; }; /* the other input ports are not connect to anything */ }; out-ports { port { hugo_funnel_out_port0: endpoint { remote-endpoint = <&etf_in_port>; }; }; }; }; etf@28c04000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x28c04000 0x1000>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; in-ports { port { etf_in_port: endpoint { remote-endpoint = <&hugo_funnel_out_port0>; }; }; }; out-ports { port { etf_out_port: endpoint { remote-endpoint = <&etr_in_port>; }; }; }; }; etr@28c06000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0x28c06000 0x1000>; clocks = <&clk IMX8MP_CLK_MAIN_AXI>; clock-names = "apb_pclk"; in-ports { port { etr_in_port: endpoint { remote-endpoint = <&etf_out_port>; }; }; }; }; aips1: bus@30000000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges; gpio1: gpio@30200000 { compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 5 30>; }; gpio2: gpio@30210000 { compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; reg = <0x30210000 0x10000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 35 21>; }; gpio3: gpio@30220000 { compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; reg = <0x30220000 0x10000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 56 26>, <&iomuxc 26 144 4>; }; gpio4: gpio@30230000 { compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; reg = <0x30230000 0x10000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 82 32>; }; gpio5: gpio@30240000 { compatible = "fsl,imx8mp-gpio", "fsl,imx35-gpio"; reg = <0x30240000 0x10000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 114 30>; }; tmu: tmu@30260000 { compatible = "fsl,imx8mp-tmu"; reg = <0x30260000 0x10000>; clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>; nvmem-cells = <&tmu_calib>; nvmem-cell-names = "calib"; #thermal-sensor-cells = <1>; }; wdog1: watchdog@30280000 { compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_WDOG1_ROOT>; status = "disabled"; }; wdog2: watchdog@30290000 { compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; reg = <0x30290000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_WDOG2_ROOT>; status = "disabled"; }; wdog3: watchdog@302a0000 { compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; reg = <0x302a0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_WDOG3_ROOT>; status = "disabled"; }; gpt1: timer@302d0000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x302d0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT1_ROOT>, <&clk IMX8MP_CLK_GPT1>; clock-names = "ipg", "per"; }; gpt2: timer@302e0000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x302e0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT2_ROOT>, <&clk IMX8MP_CLK_GPT2>; clock-names = "ipg", "per"; }; gpt3: timer@302f0000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x302f0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT3_ROOT>, <&clk IMX8MP_CLK_GPT3>; clock-names = "ipg", "per"; }; iomuxc: pinctrl@30330000 { compatible = "fsl,imx8mp-iomuxc"; reg = <0x30330000 0x10000>; }; gpr: syscon@30340000 { compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; ocotp: efuse@30350000 { compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; /* * The register address below maps to the MX8M * Fusemap Description Table entries this way. * Assuming * reg = ; * then * Fuse Address = (ADDR * 4) + 0x400 * Note that if SIZE is greater than 4, then * each subsequent fuse is located at offset * +0x10 in Fusemap Description Table (e.g. * reg = <0x8 0x8> describes fuses 0x420 and * 0x430). */ imx8mp_uid: unique-id@8 { /* 0x420-0x430 */ reg = <0x8 0x8>; }; cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; eth_mac1: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; eth_mac2: mac-address@96 { /* 0x658 */ reg = <0x96 6>; }; tmu_calib: calib@264 { /* 0xd90-0xdc0 */ reg = <0x264 0x10>; }; }; anatop: clock-controller@30360000 { compatible = "fsl,imx8mp-anatop", "fsl,imx8mm-anatop"; reg = <0x30360000 0x10000>; #clock-cells = <1>; }; snvs: snvs@30370000 { compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd"; reg = <0x30370000 0x10000>; snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; regmap = <&snvs>; offset = <0x34>; interrupts = , ; clocks = <&clk IMX8MP_CLK_SNVS_ROOT>; clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; interrupts = ; clocks = <&clk IMX8MP_CLK_SNVS_ROOT>; clock-names = "snvs-pwrkey"; linux,keycode = ; wakeup-source; status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { compatible = "fsl,imx8mp-snvs-lpgpr", "fsl,imx7d-snvs-lpgpr"; }; }; clk: clock-controller@30380000 { compatible = "fsl,imx8mp-ccm"; reg = <0x30380000 0x10000>; interrupts = , ; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>, <&clk IMX8MP_CLK_A53_CORE>, <&clk IMX8MP_CLK_NOC>, <&clk IMX8MP_CLK_NOC_IO>, <&clk IMX8MP_CLK_GIC>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_ARM_PLL_OUT>, <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <0>, <0>, <1000000000>, <800000000>, <500000000>; }; src: reset-controller@30390000 { compatible = "fsl,imx8mp-src", "syscon"; reg = <0x30390000 0x10000>; interrupts = ; #reset-cells = <1>; }; gpc: gpc@303a0000 { compatible = "fsl,imx8mp-gpc"; reg = <0x303a0000 0x1000>; interrupt-parent = <&gic>; interrupts = ; interrupt-controller; #interrupt-cells = <3>; pgc { #address-cells = <1>; #size-cells = <0>; pgc_mipi_phy1: power-domain@0 { #power-domain-cells = <0>; reg = ; }; pgc_pcie_phy: power-domain@1 { #power-domain-cells = <0>; reg = ; }; pgc_usb1_phy: power-domain@2 { #power-domain-cells = <0>; reg = ; }; pgc_usb2_phy: power-domain@3 { #power-domain-cells = <0>; reg = ; }; pgc_mlmix: power-domain@4 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>, <&clk IMX8MP_CLK_NPU_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>, <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <800000000>, <800000000>, <300000000>; }; pgc_audio: power-domain@5 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, <&clk IMX8MP_CLK_AUDIO_AXI>; assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>, <&clk IMX8MP_CLK_AUDIO_AXI_SRC>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <400000000>, <600000000>; }; pgc_gpu2d: power-domain@6 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>; power-domains = <&pgc_gpumix>; }; pgc_gpumix: power-domain@7 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; assigned-clocks = <&clk IMX8MP_CLK_GPU_AXI>, <&clk IMX8MP_CLK_GPU_AHB>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <800000000>, <400000000>; }; pgc_vpumix: power-domain@8 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_VPU_ROOT>; }; pgc_gpu3d: power-domain@9 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; power-domains = <&pgc_gpumix>; }; pgc_mediamix: power-domain@10 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; }; pgc_vpu_g1: power-domain@11 { #power-domain-cells = <0>; power-domains = <&pgc_vpumix>; reg = ; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; }; pgc_vpu_g2: power-domain@12 { #power-domain-cells = <0>; power-domains = <&pgc_vpumix>; reg = ; clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; }; pgc_vpu_vc8000e: power-domain@13 { #power-domain-cells = <0>; power-domains = <&pgc_vpumix>; reg = ; clocks = <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; }; pgc_hdmimix: power-domain@14 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_HDMI_ROOT>, <&clk IMX8MP_CLK_HDMI_APB>; assigned-clocks = <&clk IMX8MP_CLK_HDMI_AXI>, <&clk IMX8MP_CLK_HDMI_APB>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>, <&clk IMX8MP_SYS_PLL1_133M>; assigned-clock-rates = <500000000>, <133000000>; }; pgc_hdmi_phy: power-domain@15 { #power-domain-cells = <0>; reg = ; }; pgc_mipi_phy2: power-domain@16 { #power-domain-cells = <0>; reg = ; }; pgc_hsiomix: power-domain@17 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_HSIO_AXI>, <&clk IMX8MP_CLK_HSIO_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <500000000>; }; pgc_ispdwp: power-domain@18 { #power-domain-cells = <0>; reg = ; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>; }; }; }; }; aips2: bus@30400000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30400000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges; pwm1: pwm@30660000 { compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; reg = <0x30660000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_PWM1_ROOT>, <&clk IMX8MP_CLK_PWM1_ROOT>; clock-names = "ipg", "per"; #pwm-cells = <3>; status = "disabled"; }; pwm2: pwm@30670000 { compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; reg = <0x30670000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_PWM2_ROOT>, <&clk IMX8MP_CLK_PWM2_ROOT>; clock-names = "ipg", "per"; #pwm-cells = <3>; status = "disabled"; }; pwm3: pwm@30680000 { compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; reg = <0x30680000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_PWM3_ROOT>, <&clk IMX8MP_CLK_PWM3_ROOT>; clock-names = "ipg", "per"; #pwm-cells = <3>; status = "disabled"; }; pwm4: pwm@30690000 { compatible = "fsl,imx8mp-pwm", "fsl,imx27-pwm"; reg = <0x30690000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_PWM4_ROOT>, <&clk IMX8MP_CLK_PWM4_ROOT>; clock-names = "ipg", "per"; #pwm-cells = <3>; status = "disabled"; }; system_counter: timer@306a0000 { compatible = "nxp,sysctr-timer"; reg = <0x306a0000 0x20000>; interrupts = ; clocks = <&osc_24m>; clock-names = "per"; }; gpt6: timer@306e0000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x306e0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT6_ROOT>, <&clk IMX8MP_CLK_GPT6>; clock-names = "ipg", "per"; }; gpt5: timer@306f0000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x306f0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT5_ROOT>, <&clk IMX8MP_CLK_GPT5>; clock-names = "ipg", "per"; }; gpt4: timer@30700000 { compatible = "fsl,imx8mp-gpt", "fsl,imx6dl-gpt"; reg = <0x30700000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPT4_ROOT>, <&clk IMX8MP_CLK_GPT4>; clock-names = "ipg", "per"; }; }; aips3: bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30800000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges; spba-bus@30800000 { compatible = "fsl,spba-bus", "simple-bus"; reg = <0x30800000 0x100000>; #address-cells = <1>; #size-cells = <1>; ranges; ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; reg = <0x30820000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>, <&clk IMX8MP_CLK_ECSPI1_ROOT>; clock-names = "ipg", "per"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; ecspi2: spi@30830000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; reg = <0x30830000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>, <&clk IMX8MP_CLK_ECSPI2_ROOT>; clock-names = "ipg", "per"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; ecspi3: spi@30840000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi"; reg = <0x30840000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>, <&clk IMX8MP_CLK_ECSPI3_ROOT>; clock-names = "ipg", "per"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>; dma-names = "rx", "tx"; status = "disabled"; }; uart1: serial@30860000 { compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; reg = <0x30860000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_UART1_ROOT>, <&clk IMX8MP_CLK_UART1_ROOT>; clock-names = "ipg", "per"; dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; dma-names = "rx", "tx"; status = "disabled"; }; uart3: serial@30880000 { compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; reg = <0x30880000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_UART3_ROOT>, <&clk IMX8MP_CLK_UART3_ROOT>; clock-names = "ipg", "per"; dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; dma-names = "rx", "tx"; status = "disabled"; }; uart2: serial@30890000 { compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; reg = <0x30890000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_UART2_ROOT>, <&clk IMX8MP_CLK_UART2_ROOT>; clock-names = "ipg", "per"; dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; dma-names = "rx", "tx"; status = "disabled"; }; flexcan1: can@308c0000 { compatible = "fsl,imx8mp-flexcan"; reg = <0x308c0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_CAN1_ROOT>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX8MP_CLK_CAN1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; assigned-clock-rates = <40000000>; fsl,clk-source = /bits/ 8 <0>; fsl,stop-mode = <&gpr 0x10 4>; status = "disabled"; }; flexcan2: can@308d0000 { compatible = "fsl,imx8mp-flexcan"; reg = <0x308d0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_CAN2_ROOT>; clock-names = "ipg", "per"; assigned-clocks = <&clk IMX8MP_CLK_CAN2>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; assigned-clock-rates = <40000000>; fsl,clk-source = /bits/ 8 <0>; fsl,stop-mode = <&gpr 0x10 5>; status = "disabled"; }; }; crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; ranges = <0 0x30900000 0x40000>; interrupts = ; clocks = <&clk IMX8MP_CLK_AHB>, <&clk IMX8MP_CLK_IPG_ROOT>; clock-names = "aclk", "ipg"; sec_jr0: jr@1000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = ; status = "disabled"; }; sec_jr1: jr@2000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = ; }; sec_jr2: jr@3000 { compatible = "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = ; }; }; i2c1: i2c@30a20000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30a20000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C1_ROOT>; status = "disabled"; }; i2c2: i2c@30a30000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30a30000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C2_ROOT>; status = "disabled"; }; i2c3: i2c@30a40000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30a40000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C3_ROOT>; status = "disabled"; }; i2c4: i2c@30a50000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30a50000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C4_ROOT>; status = "disabled"; }; uart4: serial@30a60000 { compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart"; reg = <0x30a60000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_UART4_ROOT>, <&clk IMX8MP_CLK_UART4_ROOT>; clock-names = "ipg", "per"; dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; dma-names = "rx", "tx"; status = "disabled"; }; mu: mailbox@30aa0000 { compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; reg = <0x30aa0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_MU_ROOT>; #mbox-cells = <2>; }; mu2: mailbox@30e60000 { compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; reg = <0x30e60000 0x10000>; interrupts = ; #mbox-cells = <2>; status = "disabled"; }; i2c5: i2c@30ad0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30ad0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C5_ROOT>; status = "disabled"; }; i2c6: i2c@30ae0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x30ae0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_I2C6_ROOT>; status = "disabled"; }; usdhc1: mmc@30b40000 { compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC1_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; usdhc2: mmc@30b50000 { compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b50000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC2_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; usdhc3: mmc@30b60000 { compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b60000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_IPG_ROOT>, <&clk IMX8MP_CLK_NAND_USDHC_BUS>, <&clk IMX8MP_CLK_USDHC3_ROOT>; clock-names = "ipg", "ahb", "per"; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; bus-width = <4>; status = "disabled"; }; flexspi: spi@30bb0000 { compatible = "nxp,imx8mp-fspi"; reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = ; clocks = <&clk IMX8MP_CLK_QSPI_ROOT>, <&clk IMX8MP_CLK_QSPI_ROOT>; clock-names = "fspi_en", "fspi"; assigned-clock-rates = <80000000>; assigned-clocks = <&clk IMX8MP_CLK_QSPI>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; reg = <0x30bd0000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>, <&clk IMX8MP_CLK_AHB>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; }; fec: ethernet@30be0000 { compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; interrupts = , , , ; clocks = <&clk IMX8MP_CLK_ENET1_ROOT>, <&clk IMX8MP_CLK_SIM_ENET_ROOT>, <&clk IMX8MP_CLK_ENET_TIMER>, <&clk IMX8MP_CLK_ENET_REF>, <&clk IMX8MP_CLK_ENET_PHY_REF>; clock-names = "ipg", "ahb", "ptp", "enet_clk_ref", "enet_out"; assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, <&clk IMX8MP_CLK_ENET_TIMER>, <&clk IMX8MP_CLK_ENET_REF>, <&clk IMX8MP_CLK_ENET_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, <&clk IMX8MP_SYS_PLL2_100M>, <&clk IMX8MP_SYS_PLL2_125M>, <&clk IMX8MP_SYS_PLL2_50M>; assigned-clock-rates = <0>, <100000000>, <125000000>, <0>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; nvmem-cells = <ð_mac1>; nvmem-cell-names = "mac-address"; fsl,stop-mode = <&gpr 0x10 3>; status = "disabled"; }; eqos: ethernet@30bf0000 { compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a"; reg = <0x30bf0000 0x10000>; interrupts = , ; interrupt-names = "macirq", "eth_wake_irq"; clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>, <&clk IMX8MP_CLK_QOS_ENET_ROOT>, <&clk IMX8MP_CLK_ENET_QOS_TIMER>, <&clk IMX8MP_CLK_ENET_QOS>; clock-names = "stmmaceth", "pclk", "ptp_ref", "tx"; assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>, <&clk IMX8MP_CLK_ENET_QOS_TIMER>, <&clk IMX8MP_CLK_ENET_QOS>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, <&clk IMX8MP_SYS_PLL2_100M>, <&clk IMX8MP_SYS_PLL2_125M>; assigned-clock-rates = <0>, <100000000>, <125000000>; nvmem-cells = <ð_mac2>; nvmem-cell-names = "mac-address"; intf_mode = <&gpr 0x4>; status = "disabled"; }; }; aips5: bus@30c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges; spba-bus@30c00000 { compatible = "fsl,spba-bus", "simple-bus"; reg = <0x30c00000 0x100000>; #address-cells = <1>; #size-cells = <1>; ranges; sai1: sai@30c10000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c10000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; sai2: sai@30c20000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c20000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; sai3: sai@30c30000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c30000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; sai5: sai@30c50000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c50000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI5_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; sai6: sai@30c60000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c60000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI6_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; sai7: sai@30c80000 { compatible = "fsl,imx8mp-sai", "fsl,imx8mq-sai"; reg = <0x30c80000 0x10000>; #sound-dai-cells = <0>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_IPG>, <&clk IMX8MP_CLK_DUMMY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK1>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK2>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI7_MCLK3>; clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; dma-names = "rx", "tx"; interrupts = ; status = "disabled"; }; easrc: easrc@30c90000 { compatible = "fsl,imx8mp-easrc", "fsl,imx8mn-easrc"; reg = <0x30c90000 0x10000>; interrupts = ; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_ASRC_IPG>; clock-names = "mem"; dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, <&sdma2 18 23 0> , <&sdma2 19 23 0>, <&sdma2 20 23 0> , <&sdma2 21 23 0>, <&sdma2 22 23 0> , <&sdma2 23 23 0>; dma-names = "ctx0_rx", "ctx0_tx", "ctx1_rx", "ctx1_tx", "ctx2_rx", "ctx2_tx", "ctx3_rx", "ctx3_tx"; firmware-name = "imx/easrc/easrc-imx8mn.bin"; fsl,asrc-rate = <8000>; fsl,asrc-format = <2>; status = "disabled"; }; micfil: audio-controller@30ca0000 { compatible = "fsl,imx8mp-micfil"; reg = <0x30ca0000 0x10000>; #sound-dai-cells = <0>; interrupts = , , , ; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_IPG>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_PDM_SEL>, <&clk IMX8MP_AUDIO_PLL1_OUT>, <&clk IMX8MP_AUDIO_PLL2_OUT>, <&clk IMX8MP_CLK_EXT3>; clock-names = "ipg_clk", "ipg_clk_app", "pll8k", "pll11k", "clkext3"; dmas = <&sdma2 24 25 0x80000000>; dma-names = "rx"; status = "disabled"; }; aud2htx: aud2htx@30cb0000 { compatible = "fsl,imx8mp-aud2htx"; reg = <0x30cb0000 0x10000>; interrupts = ; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>; clock-names = "bus"; dmas = <&sdma2 26 2 0>; dma-names = "tx"; status = "disabled"; }; xcvr: xcvr@30cc0000 { compatible = "fsl,imx8mp-xcvr"; reg = <0x30cc0000 0x800>, <0x30cc0800 0x400>, <0x30cc0c00 0x080>, <0x30cc0e00 0x080>; reg-names = "ram", "regs", "rxfifo", "txfifo"; interrupts = /* XCVR IRQ 0 */ , /* XCVR IRQ 1 */ , /* XCVR PHY - SPDIF wakeup IRQ */ ; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_IPG>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_EARC_PHY>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SPBA2_ROOT>, <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_AUDPLL_ROOT>; clock-names = "ipg", "phy", "spba", "pll_ipg"; dmas = <&sdma2 30 2 0>, <&sdma2 31 2 0>; dma-names = "rx", "tx"; resets = <&audio_blk_ctrl 0>; status = "disabled"; }; }; sdma3: dma-controller@30e00000 { compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; reg = <0x30e00000 0x10000>; #dma-cells = <3>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA3_ROOT>, <&clk IMX8MP_CLK_AUDIO_ROOT>; clock-names = "ipg", "ahb"; interrupts = ; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; }; sdma2: dma-controller@30e10000 { compatible = "fsl,imx8mp-sdma", "fsl,imx8mq-sdma"; reg = <0x30e10000 0x10000>; #dma-cells = <3>; clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SDMA2_ROOT>, <&clk IMX8MP_CLK_AUDIO_ROOT>; clock-names = "ipg", "ahb"; interrupts = ; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin"; }; audio_blk_ctrl: clock-controller@30e20000 { compatible = "fsl,imx8mp-audio-blk-ctrl"; reg = <0x30e20000 0x10000>; #clock-cells = <1>; #reset-cells = <1>; clocks = <&clk IMX8MP_CLK_AUDIO_ROOT>, <&clk IMX8MP_CLK_SAI1>, <&clk IMX8MP_CLK_SAI2>, <&clk IMX8MP_CLK_SAI3>, <&clk IMX8MP_CLK_SAI5>, <&clk IMX8MP_CLK_SAI6>, <&clk IMX8MP_CLK_SAI7>; clock-names = "ahb", "sai1", "sai2", "sai3", "sai5", "sai6", "sai7"; power-domains = <&pgc_audio>; assigned-clocks = <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>; assigned-clock-rates = <393216000>, <361267200>; }; }; noc: interconnect@32700000 { compatible = "fsl,imx8mp-noc", "fsl,imx8m-noc"; reg = <0x32700000 0x100000>; clocks = <&clk IMX8MP_CLK_NOC>; #interconnect-cells = <1>; operating-points-v2 = <&noc_opp_table>; noc_opp_table: opp-table { compatible = "operating-points-v2"; opp-200000000 { opp-hz = /bits/ 64 <200000000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; }; }; }; aips4: bus@32c00000 { compatible = "fsl,aips-bus", "simple-bus"; reg = <0x32c00000 0x400000>; #address-cells = <1>; #size-cells = <1>; ranges; isi_0: isi@32e00000 { compatible = "fsl,imx8mp-isi"; reg = <0x32e00000 0x4000>; interrupts = , ; clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; clock-names = "axi", "apb"; fsl,blk-ctrl = <&media_blk_ctrl>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISI>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; isi_in_0: endpoint { remote-endpoint = <&mipi_csi_0_out>; }; }; port@1 { reg = <1>; isi_in_1: endpoint { remote-endpoint = <&mipi_csi_1_out>; }; }; }; }; isp_0: isp@32e10000 { compatible = "fsl,imx8mp-isp"; reg = <0x32e10000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; clock-names = "isp", "aclk", "hclk"; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; fsl,blk-ctrl = <&media_blk_ctrl 0>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; }; }; }; isp_1: isp@32e20000 { compatible = "fsl,imx8mp-isp"; reg = <0x32e20000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; clock-names = "isp", "aclk", "hclk"; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; fsl,blk-ctrl = <&media_blk_ctrl 1>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; }; }; }; dewarp: dwe@32e30000 { compatible = "nxp,imx8mp-dw100"; reg = <0x32e30000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; clock-names = "axi", "ahb"; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_DWE>; }; mipi_csi_0: csi@32e40000 { compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; reg = <0x32e40000 0x10000>; interrupts = ; clock-frequency = <250000000>; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM1_PIX>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; }; port@1 { reg = <1>; mipi_csi_0_out: endpoint { remote-endpoint = <&isi_in_0>; }; }; }; }; mipi_csi_1: csi@32e50000 { compatible = "fsl,imx8mp-mipi-csi2", "fsl,imx8mm-mipi-csi2"; reg = <0x32e50000 0x10000>; interrupts = ; clock-frequency = <250000000>; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pclk", "wrap", "phy", "axi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_CAM2_PIX>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; }; port@1 { reg = <1>; mipi_csi_1_out: endpoint { remote-endpoint = <&isi_in_1>; }; }; }; }; mipi_dsi: dsi@32e60000 { compatible = "fsl,imx8mp-mipi-dsim"; reg = <0x32e60000 0x400>; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; clock-names = "bus_clk", "sclk_mipi"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_APB>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_CLK_24M>; assigned-clock-rates = <200000000>, <24000000>; samsung,pll-clock-frequency = <24000000>; interrupts = ; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_DSI_1>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; dsim_from_lcdif1: endpoint { remote-endpoint = <&lcdif1_to_dsim>; }; }; port@1 { reg = <1>; mipi_dsi_out: endpoint { }; }; }; }; lcdif1: display-controller@32e80000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32e80000 0x10000>; clocks = <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pix", "axi", "disp_axi"; interrupts = ; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_1>; status = "disabled"; port { lcdif1_to_dsim: endpoint { remote-endpoint = <&dsim_from_lcdif1>; }; }; }; lcdif2: display-controller@32e90000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32e90000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>; clock-names = "pix", "axi", "disp_axi"; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_LCDIF_2>; status = "disabled"; port { lcdif2_to_ldb: endpoint { remote-endpoint = <&ldb_from_lcdif2>; }; }; }; media_blk_ctrl: blk-ctrl@32ec0000 { compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; reg = <0x32ec0000 0x10000>; #address-cells = <1>; #size-cells = <1>; power-domains = <&pgc_mediamix>, <&pgc_mipi_phy1>, <&pgc_mipi_phy1>, <&pgc_mediamix>, <&pgc_mediamix>, <&pgc_mipi_phy2>, <&pgc_mediamix>, <&pgc_ispdwp>, <&pgc_ispdwp>, <&pgc_mipi_phy2>; power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; interconnects = <&noc IMX8MP_ICM_LCDIF_RD &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_LCDIF_WR &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_ISI0 &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_ISI1 &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_ISI2 &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_ISP0 &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_ISP1 &noc IMX8MP_ICN_MEDIA>, <&noc IMX8MP_ICM_DWE &noc IMX8MP_ICN_MEDIA>; interconnect-names = "lcdif-rd", "lcdif-wr", "isi0", "isi1", "isi2", "isp0", "isp1", "dwe"; clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", "isp", "phy"; /* * The ISP maximum frequency is 400MHz in normal mode * and 500MHz in overdrive mode. The 400MHz operating * point hasn't been successfully tested yet, so set * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being. */ assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>, <&clk IMX8MP_CLK_MEDIA_APB>, <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, <&clk IMX8MP_CLK_MEDIA_ISP>, <&clk IMX8MP_VIDEO_PLL1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_VIDEO_PLL1_OUT>, <&clk IMX8MP_VIDEO_PLL1_OUT>, <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <500000000>, <200000000>, <0>, <0>, <500000000>, <1039500000>; #power-domain-cells = <1>; lvds_bridge: bridge@5c { compatible = "fsl,imx8mp-ldb"; reg = <0x5c 0x4>, <0x128 0x4>; reg-names = "ldb", "lvds"; clocks = <&clk IMX8MP_CLK_MEDIA_LDB_ROOT>; clock-names = "ldb"; assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; ldb_from_lcdif2: endpoint { remote-endpoint = <&lcdif2_to_ldb>; }; }; port@1 { reg = <1>; ldb_lvds_ch0: endpoint { }; }; port@2 { reg = <2>; ldb_lvds_ch1: endpoint { }; }; }; }; }; pcie_phy: pcie-phy@32f00000 { compatible = "fsl,imx8mp-pcie-phy"; reg = <0x32f00000 0x10000>; resets = <&src IMX8MP_RESET_PCIEPHY>, <&src IMX8MP_RESET_PCIEPHY_PERST>; reset-names = "pciephy", "perst"; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>; #phy-cells = <0>; status = "disabled"; }; hsio_blk_ctrl: blk-ctrl@32f10000 { compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; reg = <0x32f10000 0x24>; clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_PCIE_ROOT>; clock-names = "usb", "pcie"; power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, <&pgc_usb1_phy>, <&pgc_usb2_phy>, <&pgc_hsiomix>, <&pgc_pcie_phy>; power-domain-names = "bus", "usb", "usb-phy1", "usb-phy2", "pcie", "pcie-phy"; interconnects = <&noc IMX8MP_ICM_NOC_PCIE &noc IMX8MP_ICN_HSIO>, <&noc IMX8MP_ICM_USB1 &noc IMX8MP_ICN_HSIO>, <&noc IMX8MP_ICM_USB2 &noc IMX8MP_ICN_HSIO>, <&noc IMX8MP_ICM_PCIE &noc IMX8MP_ICN_HSIO>; interconnect-names = "noc-pcie", "usb1", "usb2", "pcie"; #power-domain-cells = <1>; #clock-cells = <0>; }; hdmi_blk_ctrl: blk-ctrl@32fc0000 { compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; reg = <0x32fc0000 0x1000>; clocks = <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_ROOT>, <&clk IMX8MP_CLK_HDMI_REF_266M>, <&clk IMX8MP_CLK_HDMI_24M>, <&clk IMX8MP_CLK_HDMI_FDCC_TST>; clock-names = "apb", "axi", "ref_266m", "ref_24m", "fdcc"; power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmi_phy>, <&pgc_hdmimix>, <&pgc_hdmimix>; power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", "hdmi-tx", "hdmi-tx-phy", "hdcp", "hrv"; #power-domain-cells = <1>; }; irqsteer_hdmi: interrupt-controller@32fc2000 { compatible = "fsl,imx8mp-irqsteer", "fsl,imx-irqsteer"; reg = <0x32fc2000 0x1000>; interrupts = ; interrupt-controller; #interrupt-cells = <1>; fsl,channel = <1>; fsl,num-irqs = <64>; clocks = <&clk IMX8MP_CLK_HDMI_APB>; clock-names = "ipg"; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>; }; hdmi_pvi: display-bridge@32fc4000 { compatible = "fsl,imx8mp-hdmi-pvi"; reg = <0x32fc4000 0x1000>; interrupt-parent = <&irqsteer_hdmi>; interrupts = <12>; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pvi_from_lcdif3: endpoint { remote-endpoint = <&lcdif3_to_pvi>; }; }; port@1 { reg = <1>; pvi_to_hdmi_tx: endpoint { remote-endpoint = <&hdmi_tx_from_pvi>; }; }; }; }; lcdif3: display-controller@32fc6000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32fc6000 0x1000>; interrupt-parent = <&irqsteer_hdmi>; interrupts = <8>; clocks = <&hdmi_tx_phy>, <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_ROOT>; clock-names = "pix", "axi", "disp_axi"; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>; status = "disabled"; port { lcdif3_to_pvi: endpoint { remote-endpoint = <&pvi_from_lcdif3>; }; }; }; hdmi_tx: hdmi@32fd8000 { compatible = "fsl,imx8mp-hdmi-tx"; reg = <0x32fd8000 0x7eff>; interrupt-parent = <&irqsteer_hdmi>; interrupts = <0>; clocks = <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_REF_266M>, <&clk IMX8MP_CLK_32K>, <&hdmi_tx_phy>; clock-names = "iahb", "isfr", "cec", "pix"; assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>; reg-io-width = <1>; status = "disabled"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; hdmi_tx_from_pvi: endpoint { remote-endpoint = <&pvi_to_hdmi_tx>; }; }; port@1 { reg = <1>; /* Point endpoint to the HDMI connector */ }; }; }; hdmi_tx_phy: phy@32fdff00 { compatible = "fsl,imx8mp-hdmi-phy"; reg = <0x32fdff00 0x100>; clocks = <&clk IMX8MP_CLK_HDMI_APB>, <&clk IMX8MP_CLK_HDMI_24M>; clock-names = "apb", "ref"; assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>; #clock-cells = <0>; #phy-cells = <0>; status = "disabled"; }; }; pcie: pcie@33800000 { compatible = "fsl,imx8mp-pcie"; reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; reg-names = "dbi", "config"; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, <&clk IMX8MP_CLK_HSIO_AXI>, <&clk IMX8MP_CLK_PCIE_ROOT>; clock-names = "pcie", "pcie_bus", "pcie_aux"; assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; assigned-clock-rates = <10000000>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; bus-range = <0x00 0xff>; ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; num-viewport = <4>; interrupts = ; interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <3>; linux,pci-domain = <0>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "apps", "turnoff"; phys = <&pcie_phy>; phy-names = "pcie-phy"; status = "disabled"; }; pcie_ep: pcie-ep@33800000 { compatible = "fsl,imx8mp-pcie-ep"; reg = <0x33800000 0x100000>, <0x18000000 0x8000000>, <0x33900000 0x100000>, <0x33b00000 0x100000>; reg-names = "dbi", "addr_space", "dbi2", "atu"; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, <&clk IMX8MP_CLK_HSIO_AXI>, <&clk IMX8MP_CLK_PCIE_ROOT>; clock-names = "pcie", "pcie_bus", "pcie_aux"; assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; assigned-clock-rates = <10000000>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; num-lanes = <1>; interrupts = ; /* eDMA */ interrupt-names = "dma"; fsl,max-link-speed = <3>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; reset-names = "apps", "turnoff"; phys = <&pcie_phy>; phy-names = "pcie-phy"; num-ib-windows = <4>; num-ob-windows = <4>; status = "disabled"; }; gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPU3D_ROOT>, <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>, <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "shader", "bus", "reg"; assigned-clocks = <&clk IMX8MP_CLK_GPU3D_CORE>, <&clk IMX8MP_CLK_GPU3D_SHADER_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <800000000>, <800000000>; power-domains = <&pgc_gpu3d>; }; gpu2d: gpu@38008000 { compatible = "vivante,gc"; reg = <0x38008000 0x8000>; interrupts = ; clocks = <&clk IMX8MP_CLK_GPU2D_ROOT>, <&clk IMX8MP_CLK_GPU_ROOT>, <&clk IMX8MP_CLK_GPU_AHB>; clock-names = "core", "bus", "reg"; assigned-clocks = <&clk IMX8MP_CLK_GPU2D_CORE>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <800000000>; power-domains = <&pgc_gpu2d>; }; vpu_g1: video-codec@38300000 { compatible = "nxp,imx8mm-vpu-g1"; reg = <0x38300000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>; assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; assigned-clock-rates = <600000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>; }; vpu_g2: video-codec@38310000 { compatible = "nxp,imx8mq-vpu-g2"; reg = <0x38310000 0x10000>; interrupts = ; clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>; assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>; assigned-clock-rates = <500000000>; power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>; }; vpumix_blk_ctrl: blk-ctrl@38330000 { compatible = "fsl,imx8mp-vpu-blk-ctrl", "syscon"; reg = <0x38330000 0x100>; #power-domain-cells = <1>; power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, <&pgc_vpu_g2>, <&pgc_vpu_vc8000e>; power-domain-names = "bus", "g1", "g2", "vc8000e"; clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>, <&clk IMX8MP_CLK_VPU_G2_ROOT>, <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>; clock-names = "g1", "g2", "vc8000e"; assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>; assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>; assigned-clock-rates = <600000000>, <600000000>; interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>, <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>; interconnect-names = "g1", "g2", "vc8000e"; }; npu: npu@38500000 { compatible = "vivante,gc"; reg = <0x38500000 0x200000>; interrupts = ; clocks = <&clk IMX8MP_CLK_NPU_ROOT>, <&clk IMX8MP_CLK_NPU_ROOT>, <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>; clock-names = "core", "shader", "bus", "reg"; power-domains = <&pgc_mlmix>; }; gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, <0x38880000 0xc0000>; #interrupt-cells = <3>; interrupt-controller; interrupts = ; interrupt-parent = <&gic>; }; edacmc: memory-controller@3d400000 { compatible = "snps,ddrc-3.80a"; reg = <0x3d400000 0x400000>; interrupts = ; }; ddr-pmu@3d800000 { compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu"; reg = <0x3d800000 0x400000>; interrupts = ; }; usb3_phy0: usb-phy@381f0040 { compatible = "fsl,imx8mp-usb-phy"; reg = <0x381f0040 0x40>; clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>; clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>; #phy-cells = <0>; status = "disabled"; }; usb3_0: usb@32f10100 { compatible = "fsl,imx8mp-dwc3"; reg = <0x32f10100 0x8>, <0x381f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = ; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; ranges; status = "disabled"; usb_dwc3_0: usb@38100000 { compatible = "snps,dwc3"; reg = <0x38100000 0x10000>; clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = ; phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; snps,gfladj-refclk-lpm-sel-quirk; snps,parkmode-disable-ss-quirk; }; }; usb3_phy1: usb-phy@382f0040 { compatible = "fsl,imx8mp-usb-phy"; reg = <0x382f0040 0x40>; clocks = <&clk IMX8MP_CLK_USB_PHY_ROOT>; clock-names = "phy"; assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>; assigned-clock-parents = <&clk IMX8MP_CLK_24M>; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>; #phy-cells = <0>; status = "disabled"; }; usb3_1: usb@32f10108 { compatible = "fsl,imx8mp-dwc3"; reg = <0x32f10108 0x8>, <0x382f0000 0x20>; clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "hsio", "suspend"; interrupts = ; power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>; #address-cells = <1>; #size-cells = <1>; dma-ranges = <0x40000000 0x40000000 0xc0000000>; ranges; status = "disabled"; usb_dwc3_1: usb@38200000 { compatible = "snps,dwc3"; reg = <0x38200000 0x10000>; clocks = <&clk IMX8MP_CLK_USB_ROOT>, <&clk IMX8MP_CLK_USB_CORE_REF>, <&clk IMX8MP_CLK_USB_SUSP>; clock-names = "bus_early", "ref", "suspend"; interrupts = ; phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; snps,gfladj-refclk-lpm-sel-quirk; snps,parkmode-disable-ss-quirk; }; }; dsp: dsp@3b6e8000 { compatible = "fsl,imx8mp-dsp"; reg = <0x3b6e8000 0x88000>; mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1"; mboxes = <&mu2 2 0>, <&mu2 2 1>, <&mu2 3 0>, <&mu2 3 1>; memory-region = <&dsp_reserved>; status = "disabled"; }; }; };