// SPDX-License-Identifier: GPL-2.0+ OR MIT /* * Copyright (C) 2024 Kontron Electronics GmbH */ #include #include "imx93.dtsi" / { model = "Kontron OSM-S i.MX93"; compatible = "kontron,imx93-osm-s", "fsl,imx93"; aliases { rtc0 = &rv3028; rtc1 = &bbnsm_rtc; }; memory@40000000 { device_type = "memory"; reg = <0x0 0x40000000 0 0x80000000>; }; chosen { stdout-path = &lpuart1; }; reg_usdhc2_vcc: regulator-usdhc2-vcc { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "VCC_SDIO_A"; }; reg_vdd_carrier: regulator-vdd-carrier { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_vdd_carrier>; gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; regulator-boot-on; regulator-name = "VDD_CARRIER"; regulator-state-standby { regulator-on-in-suspend; }; regulator-state-mem { regulator-off-in-suspend; }; regulator-state-disk { regulator-off-in-suspend; }; }; }; &flexcan1 { /* OSM-S CAN_A */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan1>; }; &flexcan2 { /* OSM-S CAN_B */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexcan2>; }; &gpio1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio1>; gpio-line-names = "", "", "I2C_A_SCL", "I2C_A_SDA", "UART_CON_RX", "UART_CON_TX", "UART_C_RX", "UART_C_TX", "CAN_A_TX", "CAN_A_RX", "GPIO_A_0", "SPI_A_CS0", "SPI_A_SDI", "SPI_A_SCK","SPI_A_SDO"; }; &gpio2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio2>; gpio-line-names = "I2C_B_SDA", "I2C_B_SCL", "GPIO_B_1", "GPIO_A_2", "UART_B_TX", "UART_B_RX", "UART_B_RTS", "UART_B_CTS", "UART_A_TX", "UART_A_RX", "UART_A_RTS", "UART_A_CTS", "SPI_B_CS0", "SPI_B_SDI", "SPI_B_SDO", "SPI_B_SCK", "I2S_BITCLK", "I2S_MCLK", "GPIO_A_1", "I2S_A_DATA_OUT", "I2S_A_DATA_IN", "PWM_2", "GPIO_A_3", "PWM_1", "PWM_0", "CAN_B_TX", "I2S_LRCLK", "CAN_B_RX", "GPIO_A_4", "GPIO_A_5"; }; &gpio3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio3>; gpio-line-names = "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0", "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN", "", "", "", "", "", "", "", "", "", "", "", "", "SDIO_B_CLK", "SDIO_B_CMD", "SDIO_B_D0", "SDIO_B_D1", "SDIO_B_D2", "SDIO_B_D3", "GPIO_A_6", "GPIO_A_7"; }; &gpio4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio4>; gpio-line-names = "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD4", "ETH_B_TXD3", "ETH_B_TXD2", "ETH_B_TXD1", "ETH_B_TX_EN", "ETH_B_TX_CLK", "ETH_B_RX_CTL", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1", "ETH_B_RXD2", "ETH_B_RXD3", "ETH_MDC", "ETH_MDIO", "ETH_A_TXD3", "ETH_A_TXD2", "ETH_A_TXD1", "ETH_A_TXD0", "ETH_A_TX_EN", "ETH_A_TX_CLK", "ETH_A_RX_CTL", "ETH_A_RX_CLK", "ETH_A_RXD0", "ETH_A_RXD1", "ETH_A_RXD2", "ETH_A_RXD3", "GPIO_B_0", "CARRIER_PWR_EN"; }; &lpi2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c1>; status = "okay"; pca9451: pmic@25 { compatible = "nxp,pca9451a"; reg = <0x25>; nxp,i2c-lt-enable; regulators { reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */ regulator-name = "+0V8_VDD_SOC (BUCK1)"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; reg_vddq_ddr: BUCK2 { regulator-name = "+0V6_VDDQ_DDR (BUCK2)"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <600000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; reg_vdd_3v3: BUCK4 { regulator-name = "+3V3 (BUCK4)"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; reg_vdd_1v8: BUCK5 { regulator-name = "+1V8 (BUCK5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; reg_nvcc_dram: BUCK6 { regulator-name = "+1V1_NVCC_DRAM (BUCK6)"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; reg_nvcc_snvs: LDO1 { regulator-name = "+1V8_NVCC_SNVS (LDO1)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; reg_vdd_ana: LDO4 { regulator-name = "+0V8_VDD_ANA (LDO4)"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; reg_nvcc_sd: LDO5 { regulator-name = "NVCC_SD (LDO5)"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; }; }; eeprom@50 { compatible = "onnn,n24s64b", "atmel,24c64"; reg = <0x50>; pagesize = <32>; size = <8192>; num-addresses = <1>; }; rv3028: rtc@52 { compatible = "microcrystal,rv3028"; reg = <0x52>; }; }; &lpi2c2 { /* OSM-S I2C_A */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c2>; }; &lpi2c3 { /* OSM-S I2C_B */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c3>; }; &lpspi1 { /* OSM-S SPI_A */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi1>; cs-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; &lpspi8 { /* OSM-S SPI_B */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi8>; cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; }; &lpuart1 { /* OSM-S UART_CON */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; }; &lpuart2 { /* OSM-S UART_C */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; }; &lpuart6 { /* OSM-S UART_B */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart6>; }; &lpuart7 { /* OSM-S UART_A */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart7>; }; &tpm3 { /* OSM-S PWM_0 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm3>; }; &tpm4 { /* OSM-S PWM_2 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm4>; }; &tpm6 { /* OSM-S PWM_1 */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tpm6>; }; &usdhc1 { /* eMMC */ pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; vmmc-supply = <®_vdd_3v3>; vqmmc-supply = <®_vdd_1v8>; bus-width = <8>; non-removable; status = "okay"; }; &usdhc2 { /* OSM-S SDIO_A */ pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; vmmc-supply = <®_usdhc2_vcc>; cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; }; &usdhc3 { /* OSM-S SDIO_B */ pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; vqmmc-supply = <®_vdd_1v8>; }; &wdog3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; fsl,ext-reset-output; status = "okay"; }; &iomuxc { pinctrl_enet_rgmii: enetrgmiigrp { fsl,pins = < MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e /* ETH_MDC */ MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e /* ETH_MDIO */ MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e /* ETH_A_(S)(R)(G)MII_RXD0 */ MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e /* ETH_A_(S)(R)(G)MII_RXD1 */ MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e /* ETH_A_(R)(G)MII_RXD2 */ MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e /* ETH_A_(R)(G)MII_RXD3 */ MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe /* ETH_A_(R)(G)MII_RX_CLK */ MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e /* ETH_A_(R)(G)MII_RX_DV(_ER) */ MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e /* ETH_A_(S)(R)(G)MII_TXD0 */ MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e /* ETH_A_(S)(R)(G)MII_TXD1 */ MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e /* ETH_A_(S)(R)(G)MII_TXD2 */ MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e /* ETH_A_(S)(R)(G)MII_TXD3 */ MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe /* ETH_A_(R)(G)MII_TX_CLK */ MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e /* ETH_A_(R)(G)MII_TX_EN(_ER) */ >; }; pinctrl_eqos_rgmii: eqosrgmiigrp { fsl,pins = < MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e /* ETH_B_MDC */ MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x57e /* ETH_B_MDIO */ MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e /* ETH_B_(S)(R)(G)MII_RXD0 */ MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e /* ETH_B_(S)(R)(G)MII_RXD1 */ MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e /* ETH_B_(R)(G)MII_RXD2 */ MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e /* ETH_B_(R)(G)MII_RXD3 */ MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x57e /* ETH_B_(R)(G)MII_RX_CLK */ MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e /* ETH_B_(R)(G)MII_RX_DV(_ER) */ MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x57e /* ETH_B_(S)(R)(G)MII_TXD0 */ MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x57e /* ETH_B_(S)(R)(G)MII_TXD1 */ MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x57e /* ETH_B_(S)(R)(G)MII_TXD2 */ MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x57e /* ETH_B_(S)(R)(G)MII_TXD3 */ MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x57e /* ETH_B_(R)(G)MII_TX_CLK */ MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x57e /* ETH_B_(R)(G)MII_TX_EN(_ER) */ >; }; pinctrl_flexcan1: flexcan1grp { fsl,pins = < MX93_PAD_PDM_CLK__CAN1_TX 0x139e /* CAN_A_TX */ MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e /* CAN_A_RX */ >; }; pinctrl_flexcan2: flexcan2grp { fsl,pins = < MX93_PAD_GPIO_IO25__CAN2_TX 0x139e /* CAN_B_TX */ MX93_PAD_GPIO_IO27__CAN2_RX 0x139e /* CAN_B_RX */ >; }; pinctrl_gpio1: gpio1grp { fsl,pins = < MX93_PAD_PDM_BIT_STREAM1__GPIO1_IO10 0x31e /* GPIO_A_0 */ >; }; pinctrl_gpio2: gpio2grp { fsl,pins = < MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e /* GPIO_A_1 */ MX93_PAD_GPIO_IO03__GPIO2_IO03 0x31e /* GPIO_A_2 */ MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e /* GPIO_A_3 */ MX93_PAD_GPIO_IO28__GPIO2_IO28 0x31e /* GPIO_A_4 */ MX93_PAD_GPIO_IO29__GPIO2_IO29 0x31e /* GPIO_A_5 */ MX93_PAD_GPIO_IO02__GPIO2_IO02 0x31e /* GPIO_B_1 */ >; }; pinctrl_gpio3: gpio3grp { fsl,pins = < MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e /* GPIO_A_6 */ MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e /* GPIO_A_7 */ >; }; pinctrl_gpio4: gpio4grp { fsl,pins = < MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x31e /* GPIO_B_0 */ >; }; pinctrl_lpi2c1: lpi2c1grp { fsl,pins = < MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e >; }; pinctrl_lpi2c2: lpi2c2grp { fsl,pins = < MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e /* I2C_A_SCL */ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e /* I2C_A_SDA */ >; }; pinctrl_lpi2c3: lpi2c3grp { fsl,pins = < MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x40000b9e /* I2C_B_SCL */ MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x40000b9e /* I2C_B_SDA */ >; }; pinctrl_lpspi1: lpspi1grp { fsl,pins = < MX93_PAD_SAI1_TXC__LPSPI1_SIN 0x3fe /* SPI_A_SDI_(IO0) */ MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x3fe /* SPI_A_SDO_(IO1) */ MX93_PAD_SAI1_TXD0__LPSPI1_SCK 0x3fe /* SPI_A_SCK */ MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x3fe /* SPI_A_CS0# */ >; }; pinctrl_lpspi8: lpspi8grp { fsl,pins = < MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x3fe /* SPI_B_SDI */ MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x3fe /* SPI_B_SDO */ MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x3fe /* SPI_B_SCK */ MX93_PAD_GPIO_IO12__GPIO2_IO12 0x3fe /* SPI_B_CS0# */ >; }; pinctrl_lpuart1: lpuart1grp { fsl,pins = < MX93_PAD_UART1_RXD__LPUART1_RX 0x31e /* UART_CON_RX */ MX93_PAD_UART1_TXD__LPUART1_TX 0x31e /* UART_CON_TX */ >; }; pinctrl_lpuart2: lpuart2grp { fsl,pins = < MX93_PAD_UART2_RXD__LPUART2_RX 0x31e /* UART_C_RX */ MX93_PAD_UART2_TXD__LPUART2_TX 0x31e /* UART_C_TX */ >; }; pinctrl_lpuart6: lpuart6grp { fsl,pins = < MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e /* UART_B_RX */ MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e /* UART_B_TX */ MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x31e /* UART_B_CTS */ MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x31e /* UART_B_RTS */ >; }; pinctrl_lpuart7: lpuart7grp { fsl,pins = < MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e /* UART_A_RX */ MX93_PAD_GPIO_IO08__LPUART7_TX 0x31e /* UART_A_TX */ MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e /* UART_A_CTS */ MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x31e /* UART_A_RTS */ >; }; pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp { fsl,pins = < MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e /* SDIO_A_PWR_EN */ >; }; pinctrl_reg_vdd_carrier: regvddcarriergrp { fsl,pins = < MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e /* CARRIER_PWR_EN */ >; }; pinctrl_sai3: sai3grp { fsl,pins = < MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x31e /* I2S_A_DATA_IN */ MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x31e /* I2S_A_DATA_OUT */ MX93_PAD_GPIO_IO17__SAI3_MCLK 0x31e /* I2S_MCLK */ MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e /* I2S_LRCLK */ MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e /* I2S_BITCLK */ >; }; pinctrl_tpm3: tpm3grp { fsl,pins = < MX93_PAD_GPIO_IO24__TPM3_CH3 0x57e /* PWM_0 */ >; }; pinctrl_tpm4: tpm4grp { fsl,pins = < MX93_PAD_GPIO_IO21__TPM4_CH1 0x57e /* PWM_2 */ >; }; pinctrl_tpm6: tpm6grp { fsl,pins = < MX93_PAD_GPIO_IO23__TPM6_CH1 0x57e /* PWM_1 */ >; }; /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x1582 MX93_PAD_SD1_CMD__USDHC1_CMD 0x40001382 MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x40001382 MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x40001382 MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x40001382 MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x40001382 MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x40001382 MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x40001382 MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x40001382 MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x40001382 MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x1582 >; }; /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x158e MX93_PAD_SD1_CMD__USDHC1_CMD 0x4000138e MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x4000138e MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x4000138e MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x4000138e MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x4000138e MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x4000138e MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x4000138e MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x4000138e MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x4000138e MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x158e >; }; /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x1582 /* SDIO_A_CLK */ MX93_PAD_SD2_CMD__USDHC2_CMD 0x40001382 /* SDIO_A_CMD */ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001382 /* SDIO_A_D0 */ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001382 /* SDIO_A_D1 */ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001382 /* SDIO_A_D2 */ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x40001382 /* SDIO_A_D3 */ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 >; }; pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x158e /* SDIO_A_CLK */ MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000138e /* SDIO_A_CMD */ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000138e /* SDIO_A_D0 */ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000138e /* SDIO_A_D1 */ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000138e /* SDIO_A_D2 */ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e /* SDIO_A_D3 */ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 >; }; pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe /* SDIO_A_CLK */ MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe /* SDIO_A_CMD */ MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe /* SDIO_A_D0 */ MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe /* SDIO_A_D1 */ MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe /* SDIO_A_D2 */ MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe /* SDIO_A_D3 */ MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x1d0 >; }; pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e /* SDIO_A_CD# */ >; }; pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 /* SDIO_B_CLK */ MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 /* SDIO_B_CMD */ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 /* SDIO_B_D0 */ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 /* SDIO_B_D1 */ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 /* SDIO_B_D2 */ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 /* SDIO_B_D3 */ >; }; pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { fsl,pins = < MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_B_CLK */ MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e /* SDIO_B_CMD */ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e /* SDIO_B_D0 */ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e /* SDIO_B_D1 */ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e /* SDIO_B_D2 */ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e /* SDIO_B_D3 */ >; }; pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { fsl,pins = < MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe /* SDIO_B_CLK */ MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe /* SDIO_B_CMD */ MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe /* SDIO_B_D0 */ MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe /* SDIO_B_D1 */ MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe /* SDIO_B_D2 */ MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe /* SDIO_B_D3 */ >; }; pinctrl_wdog: wdoggrp { fsl,pins = < MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0xc6 >; }; };