// SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include "msm8916-pm8916.dtsi" #include "msm8916-modem-qdsp6.dtsi" #include #include #include / { model = "GPLUS FL8005A"; compatible = "gplus,fl8005a", "qcom,msm8916"; chassis-type = "tablet"; aliases { mmc0 = &sdhc_1; /* eMMC */ mmc1 = &sdhc_2; /* SD card */ serial0 = &blsp_uart2; }; chosen { stdout-path = "serial0"; }; battery: battery { compatible = "simple-battery"; device-chemistry = "lithium-ion-polymer"; voltage-min-design-microvolt = <3700000>; voltage-max-design-microvolt = <4200000>; energy-full-design-microwatt-hours = <13690000>; charge-full-design-microamp-hours = <3700000>; ocv-capacity-celsius = <25>; ocv-capacity-table-0 = <4186000 100>, <4126000 95>, <4078000 90>, <4036000 85>, <3997000 80>, <3962000 75>, <3932000 70>, <3904000 65>, <3874000 60>, <3839000 55>, <3809000 50>, <3792000 45>, <3780000 40>, <3772000 35>, <3764000 30>, <3752000 25>, <3731000 20>, <3704000 16>, <3677000 13>, <3670000 11>, <3668000 10>, <3666000 9>, <3662000 8>, <3658000 7>, <3648000 6>, <3624000 5>, <3580000 4>, <3518000 3>, <3434000 2>, <3310000 1>, <3000000 0>; }; flash-led-controller { /* Actually qcom,leds-gpio-flash */ compatible = "sgmicro,sgm3140"; enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&camera_flash_default>; pinctrl-names = "default"; flash_led: led { function = LED_FUNCTION_FLASH; color = ; flash-max-timeout-us = <250000>; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&gpio_keys_default>; pinctrl-names = "default"; button-volume-up { label = "Volume Up"; gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = ; }; }; gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&gpio_leds_default>; pinctrl-names = "default"; led-red { function = LED_FUNCTION_CHARGING; color = ; gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; led-green { function = LED_FUNCTION_CHARGING; color = ; gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>; retain-state-suspended; }; }; usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&usb_id_default>; pinctrl-names = "default"; }; }; &blsp_i2c5 { status = "okay"; touchscreen@38 { /* Actually ft5402 */ compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; vcc-supply = <&pm8916_l17>; iovcc-supply = <&pm8916_l6>; touchscreen-size-x = <800>; touchscreen-size-y = <500>; touchscreen-inverted-x; touchscreen-swapped-x-y; pinctrl-0 = <&touchscreen_default>; pinctrl-names = "default"; }; }; &blsp_uart2 { status = "okay"; }; &mpss_mem { reg = <0x0 0x86800000 0x0 0x5000000>; }; &pm8916_bms { monitored-battery = <&battery>; status = "okay"; }; &pm8916_codec { qcom,micbias-lvl = <2800>; qcom,mbhc-vthreshold-low = <150 180 237 450 500>; qcom,mbhc-vthreshold-high = <150 180 237 450 500>; qcom,hphl-jack-type-normally-open; }; &pm8916_resin { linux,code = ; status = "okay"; }; &pm8916_rpm_regulators { pm8916_l17: l17 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; }; &pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; }; &sdhc_2 { pinctrl-0 = <&sdc2_default &sdc2_cd_default>; pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; pinctrl-names = "default", "sleep"; cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; status = "okay"; }; &sound { model = "msm8916-1mic"; audio-routing = "AMIC1", "MIC BIAS External1", "AMIC2", "MIC BIAS Internal2", "AMIC3", "MIC BIAS External1"; }; &usb { extcon = <&usb_id>, <&usb_id>; status = "okay"; }; &usb_hs_phy { extcon = <&usb_id>; }; &venus { status = "okay"; }; &venus_mem { status = "okay"; }; &wcnss { status = "okay"; }; &wcnss_iris { compatible = "qcom,wcn3620"; }; &wcnss_mem { status = "okay"; }; &tlmm { camera_flash_default: camera-flash-default-state { pins = "gpio31", "gpio32"; function = "gpio"; drive-strength = <2>; bias-disable; }; gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; gpio_leds_default: gpio-led-default-state { pins = "gpio117", "gpio118"; function = "gpio"; drive-strength = <2>; bias-disable; }; sdc2_cd_default: sdc2-cd-default-state { pins = "gpio38"; function = "gpio"; drive-strength = <2>; bias-disable; }; touchscreen_default: touchscreen-default-state { reset-pins { pins = "gpio12"; function = "gpio"; drive-strength = <2>; bias-disable; }; touchscreen-pins { pins = "gpio13"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; };