// SPDX-License-Identifier: GPL-2.0-only

/dts-v1/;

#include "msm8916-samsung-fortuna-common.dtsi"

/ {
	model = "Samsung Galaxy Grand Prime (SM-G530W)";
	compatible = "samsung,gprimeltecan", "qcom,msm8916";
	chassis-type = "handset";

	reserved-memory {
		/* Firmware for gprimeltecan needs more space */
		/delete-node/ tz-apps@85a00000;

		/* Additional memory used by Samsung firmware modifications */
		tz-apps@85500000 {
			reg = <0x0 0x85500000 0x0 0xb00000>;
			no-map;
		};
	};
};

&battery {
	charge-term-current-microamp = <200000>;
	constant-charge-current-max-microamp = <1000000>;
	constant-charge-voltage-max-microvolt = <4350000>;
};

&bosch_accel {
	status = "okay";
};

&bosch_magn {
	status = "okay";
};

&blsp_i2c6 {
	/* pmic@34 is on i2c_nfc instead */
	/delete-node/ pmic@34;

	nfc@27 {
		compatible = "samsung,s3fwrn5-i2c";
		reg = <0x27>;

		interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_RISING>;

		en-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
		wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;

		clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;

		pinctrl-0 = <&nfc_default>, <&nfc_clk_req>;
		pinctrl-names = "default";
	};
};

&i2c_nfc {
	/* nfc@27 is on &blsp_i2c6 */

	pmic@34 {
		compatible = "richtek,rt5033";
		reg = <0x34>;

		interrupts-extended = <&tlmm 62 IRQ_TYPE_EDGE_FALLING>;

		pinctrl-0 = <&pmic_int_default>;
		pinctrl-names = "default";

		regulators {
			rt5033_reg_safe_ldo: SAFE_LDO {
				regulator-min-microvolt = <4900000>;
				regulator-max-microvolt = <4900000>;
				regulator-always-on;
			};

			/*
			 * Needed for camera, but not used yet.
			 * Define empty nodes to allow disabling the unused
			 * regulators.
			 */
			LDO {};
			BUCK {};
		};

		charger: charger {
			compatible = "richtek,rt5033-charger";
			monitored-battery = <&battery>;
			richtek,usb-connector = <&usb_con>;
		};
	};
};

&mpss_mem {
	/* Firmware for gprimeltecan needs more space */
	reg = <0x0 0x86800000 0x0 0x5400000>;
};