// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
 */

/dts-v1/;

/* PM7250B is configured to use SID8/9 */
#define PM7250B_SID 8
#define PM7250B_SID1 9

#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7250b.dtsi"
#include "pm7325.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
#include "qcs6490-audioreach.dtsi"

/delete-node/ &ipa_fw_mem;
/delete-node/ &rmtfs_mem;
/delete-node/ &adsp_mem;
/delete-node/ &cdsp_mem;
/delete-node/ &video_mem;
/delete-node/ &wlan_ce_mem;
/delete-node/ &wpss_mem;
/delete-node/ &xbl_mem;

/ {
	model = "Qualcomm Technologies, Inc. QCM6490 IDP";
	compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
	chassis-type = "embedded";

	aliases {
		serial0 = &uart5;
	};

	pm8350c_pwm_backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pm8350c_pwm 3 65535>;
		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
		pinctrl-0 = <&pmic_lcd_bl_en>;
		pinctrl-names = "default";
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	lcd_disp_bias: regulator-lcd-disp-bias {
		compatible = "regulator-fixed";
		regulator-name = "lcd_disp_bias";
		regulator-min-microvolt = <5500000>;
		regulator-max-microvolt = <5500000>;
		gpio = <&pm7250b_gpios 2 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		pinctrl-0 = <&lcd_disp_bias_en>;
		pinctrl-names = "default";
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&key_vol_up_default>;
		pinctrl-names = "default";

		key-volume-up {
			label = "Volume_up";
			gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_VOLUMEUP>;
			wakeup-source;
			debounce-interval = <15>;
			linux,can-disable;
		};
	};

	reserved-memory {
		xbl_mem: xbl@80700000 {
			reg = <0x0 0x80700000 0x0 0x100000>;
			no-map;
		};

		cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
			reg = <0x0 0x81800000 0x0 0x1e00000>;
			no-map;
		};

		camera_mem: camera@84300000 {
			reg = <0x0 0x84300000 0x0 0x500000>;
			no-map;
		};

		wpss_mem: wpss@84800000 {
			reg = <0x0 0x84800000 0x0 0x1900000>;
			no-map;
		};

		adsp_mem: adsp@86100000 {
			reg = <0x0 0x86100000 0x0 0x2800000>;
			no-map;
		};

		cdsp_mem: cdsp@88900000 {
			reg = <0x0 0x88900000 0x0 0x1e00000>;
			no-map;
		};

		video_mem: video@8a700000 {
			reg = <0x0 0x8a700000 0x0 0x700000>;
			no-map;
		};

		cvp_mem: cvp@8ae00000 {
			reg = <0x0 0x8ae00000 0x0 0x500000>;
			no-map;
		};

		ipa_fw_mem: ipa-fw@8b300000 {
			reg = <0x0 0x8b300000 0x0 0x10000>;
			no-map;
		};

		ipa_gsi_mem: ipa-gsi@8b310000 {
			reg = <0x0 0x8b310000 0x0 0xa000>;
			no-map;
		};

		gpu_microcode_mem: gpu-microcode@8b31a000 {
			reg = <0x0 0x8b31a000 0x0 0x2000>;
			no-map;
		};

		mpss_mem: mpss@8b800000 {
			reg = <0x0 0x8b800000 0x0 0xf600000>;
			no-map;
		};

		tz_stat_mem: tz-stat@c0000000 {
			reg = <0x0 0xc0000000 0x0 0x100000>;
			no-map;
		};

		tags_mem: tags@c0100000 {
			reg = <0x0 0xc0100000 0x0 0x1200000>;
			no-map;
		};

		qtee_mem: qtee@c1300000 {
			reg = <0x0 0xc1300000 0x0 0x500000>;
			no-map;
		};

		trusted_apps_mem: trusted-apps@c1800000 {
			reg = <0x0 0xc1800000 0x0 0x1c00000>;
			no-map;
		};

		debug_vm_mem: debug-vm@d0600000 {
			reg = <0x0 0xd0600000 0x0 0x100000>;
			no-map;
		};
	};

	vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;
	};

	wcd9370: audio-codec-0 {
		compatible = "qcom,wcd9370-codec";

		pinctrl-0 = <&wcd_default>;
		pinctrl-names = "default";

		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;

		vdd-buck-supply = <&vreg_l17b_1p7>;
		vdd-rxtx-supply = <&vreg_l18b_1p8>;
		vdd-px-supply = <&vreg_l18b_1p8>;
		vdd-mic-bias-supply = <&vreg_bob_3p296>;

		qcom,micbias1-microvolt = <1800000>;
		qcom,micbias2-microvolt = <1800000>;
		qcom,micbias3-microvolt = <1800000>;
		qcom,micbias4-microvolt = <1800000>;

		qcom,rx-device = <&wcd937x_rx>;
		qcom,tx-device = <&wcd937x_tx>;

		#sound-dai-cells = <1>;
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7325-rpmh-regulators";
		qcom,pmic-id = "b";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
		vdd-l2-l7-supply = <&vreg_bob_3p296>;
		vdd-l3-supply = <&vreg_s2b_0p876>;
		vdd-l5-supply = <&vreg_s2b_0p876>;
		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
		vdd-l8-supply = <&vreg_s7b_0p972>;
		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
		vdd-l13-supply = <&vreg_s7b_0p972>;
		vdd-l14-l16-supply = <&vreg_s8b_1p272>;

		vreg_s1b_1p872: smps1 {
			regulator-name = "vreg_s1b_1p872";
			regulator-min-microvolt = <1840000>;
			regulator-max-microvolt = <2040000>;
		};

		vreg_s2b_0p876: smps2 {
			regulator-name = "vreg_s2b_0p876";
			regulator-min-microvolt = <570070>;
			regulator-max-microvolt = <1050000>;
		};

		vreg_s7b_0p972: smps7 {
			regulator-name = "vreg_s7b_0p972";
			regulator-min-microvolt = <535000>;
			regulator-max-microvolt = <1120000>;
		};

		vreg_s8b_1p272: smps8 {
			regulator-name = "vreg_s8b_1p272";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1500000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
		};

		vreg_l1b_0p912: ldo1 {
			regulator-name = "vreg_l1b_0p912";
			regulator-min-microvolt = <825000>;
			regulator-max-microvolt = <925000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b_3p072: ldo2 {
			regulator-name = "vreg_l2b_3p072";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3b_0p504: ldo3 {
			regulator-name = "vreg_l3b_0p504";
			regulator-min-microvolt = <312000>;
			regulator-max-microvolt = <910000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4b_0p752: ldo4 {
			regulator-name = "vreg_l4b_0p752";
			regulator-min-microvolt = <752000>;
			regulator-max-microvolt = <820000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		reg_l5b_0p752: ldo5 {
			regulator-name = "reg_l5b_0p752";
			regulator-min-microvolt = <552000>;
			regulator-max-microvolt = <832000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6b_1p2: ldo6 {
			regulator-name = "vreg_l6b_1p2";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b_2p952: ldo7 {
			regulator-name = "vreg_l7b_2p952";
			regulator-min-microvolt = <2400000>;
			regulator-max-microvolt = <3544000>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b_0p904: ldo8 {
			regulator-name = "vreg_l8b_0p904";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b_1p2: ldo9 {
			regulator-name = "vreg_l9b_1p2";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1304000>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11b_1p504: ldo11 {
			regulator-name = "vreg_l11b_1p504";
			regulator-min-microvolt = <1504000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b_0p751: ldo12 {
			regulator-name = "vreg_l12b_0p751";
			regulator-min-microvolt = <751000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b_0p53: ldo13 {
			regulator-name = "vreg_l13b_0p53";
			regulator-min-microvolt = <530000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b_1p08: ldo14 {
			regulator-name = "vreg_l14b_1p08";
			regulator-min-microvolt = <1080000>;
			regulator-max-microvolt = <1304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15b_0p765: ldo15 {
			regulator-name = "vreg_l15b_0p765";
			regulator-min-microvolt = <765000>;
			regulator-max-microvolt = <1020000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b_1p1: ldo16 {
			regulator-name = "vreg_l16b_1p1";
			regulator-min-microvolt = <1100000>;
			regulator-max-microvolt = <1300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b_1p7: ldo17 {
			regulator-name = "vreg_l17b_1p7";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <1900000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b_1p8: ldo18 {
			regulator-name = "vreg_l18b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l19b_1p8: ldo19 {
			regulator-name = "vreg_l19b_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
						   RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8350c-rpmh-regulators";
		qcom,pmic-id = "c";

		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-s7-supply = <&vph_pwr>;
		vdd-s8-supply = <&vph_pwr>;
		vdd-s9-supply = <&vph_pwr>;
		vdd-s10-supply = <&vph_pwr>;
		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
		vdd-l10-supply = <&vreg_s7b_0p972>;
		vdd-bob-supply = <&vph_pwr>;

		vreg_s1c_2p19: smps1 {
			regulator-name = "vreg_s1c_2p19";
			regulator-min-microvolt = <2190000>;
			regulator-max-microvolt = <2210000>;
		};

		vreg_s2c_0p752: smps2 {
			regulator-name = "vreg_s2c_0p752";
			regulator-min-microvolt = <750000>;
			regulator-max-microvolt = <800000>;
		};

		vreg_s5c_0p752: smps5 {
			regulator-name = "vreg_s5c_0p752";
			regulator-min-microvolt = <465000>;
			regulator-max-microvolt = <1050000>;
		};

		vreg_s7c_0p752: smps7 {
			regulator-name = "vreg_s7c_0p752";
			regulator-min-microvolt = <465000>;
			regulator-max-microvolt = <800000>;
		};

		vreg_s9c_1p084: smps9 {
			regulator-name = "vreg_s9c_1p084";
			regulator-min-microvolt = <1010000>;
			regulator-max-microvolt = <1170000>;
		};

		vreg_l1c_1p8: ldo1 {
			regulator-name = "vreg_l1c_1p8";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1980000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c_1p62: ldo2 {
			regulator-name = "vreg_l2c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <1980000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3c_2p8: ldo3 {
			regulator-name = "vreg_l3c_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3540000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4c_1p62: ldo4 {
			regulator-name = "vreg_l4c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5c_1p62: ldo5 {
			regulator-name = "vreg_l5c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l6c_2p96: ldo6 {
			regulator-name = "vreg_l6c_2p96";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7c_3p0: ldo7 {
			regulator-name = "vreg_l7c_3p0";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8c_1p62: ldo8 {
			regulator-name = "vreg_l8c_1p62";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9c_2p96: ldo9 {
			regulator-name = "vreg_l9c_2p96";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <35440000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10c_0p88: ldo10 {
			regulator-name = "vreg_l10c_0p88";
			regulator-min-microvolt = <720000>;
			regulator-max-microvolt = <1050000>;
			regulator-allow-set-load;
			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11c_2p8: ldo11 {
			regulator-name = "vreg_l11c_2p8";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12c_1p65: ldo12 {
			regulator-name = "vreg_l12c_1p65";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <2000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13c_2p7: ldo13 {
			regulator-name = "vreg_l13c_2p7";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob_3p296: bob {
			regulator-name = "vreg_bob_3p296";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
		};
	};
};

&gcc {
	protected-clocks = <GCC_AGGRE_NOC_PCIE_1_AXI_CLK> ,<GCC_PCIE_1_AUX_CLK>,
			   <GCC_PCIE_1_AUX_CLK_SRC>, <GCC_PCIE_1_CFG_AHB_CLK>,
			   <GCC_PCIE_1_MSTR_AXI_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <GCC_QSPI_CORE_CLK>,
			   <GCC_QSPI_CORE_CLK_SRC>,<GCC_USB30_SEC_MASTER_CLK>,
			   <GCC_USB30_SEC_MASTER_CLK_SRC>, <GCC_USB30_SEC_MOCK_UTMI_CLK>,
			   <GCC_USB30_SEC_MOCK_UTMI_CLK_SRC>,
			   <GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC>, <GCC_USB30_SEC_SLEEP_CLK>,
			   <GCC_USB3_SEC_PHY_AUX_CLK>, <GCC_USB3_SEC_PHY_AUX_CLK_SRC>,
			   <GCC_USB3_SEC_PHY_COM_AUX_CLK>, <GCC_USB3_SEC_PHY_PIPE_CLK>,
			   <GCC_USB3_SEC_PHY_PIPE_CLK_SRC>, <GCC_CFG_NOC_LPASS_CLK>,
			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>, <GCC_MSS_CFG_AHB_CLK>,
			   <GCC_MSS_OFFLINE_AXI_CLK>, <GCC_MSS_SNOC_AXI_CLK>,
			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>, <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
			   <GCC_SEC_CTRL_CLK_SRC>, <GCC_WPSS_AHB_CLK>,
			   <GCC_WPSS_AHB_BDG_MST_CLK>, <GCC_WPSS_RSCP_CLK>;
};

&gpu {
	status = "okay";
};

&gpu_zap_shader {
	firmware-name = "qcom/qcm6490/a660_zap.mbn";
};

&lpass_rx_macro {
	status = "okay";
};

&lpass_tx_macro {
	status = "okay";
};

&lpass_va_macro {
	status = "okay";
};

&lpass_wsa_macro {
	status = "okay";
};

&mdss {
	status = "okay";
};

&mdss_dsi {
	vdda-supply = <&vreg_l6b_1p2>;
	status = "okay";

	panel@0 {
		compatible = "novatek,nt36672e";
		reg = <0>;

		reset-gpios = <&tlmm 44 GPIO_ACTIVE_HIGH>;

		vddi-supply = <&vreg_l8c_1p62>;
		avdd-supply = <&lcd_disp_bias>;
		avee-supply = <&lcd_disp_bias>;

		backlight = <&pm8350c_pwm_backlight>;

		port {
			panel0_in: endpoint {
				remote-endpoint = <&mdss_dsi0_out>;
			};
		};
	};
};

&mdss_dsi0_out {
	remote-endpoint = <&panel0_in>;
	data-lanes = <0 1 2 3>;
};

&mdss_dsi_phy {
	vdds-supply = <&vreg_l10c_0p88>;
	status = "okay";
};

&pm7250b_gpios {
	lcd_disp_bias_en: lcd-disp-bias-en-state {
		pins = "gpio2";
		function = "func1";
		bias-disable;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
		input-disable;
		output-enable;
		power-source = <0>;
	};
};

&pm8350c_gpios {
	pmic_lcd_bl_en: pmic-lcd-bl-en-state {
		pins = "gpio7";
		function = "normal";
		bias-disable;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
		output-low;
		power-source = <0>;
	};

	pmic_lcd_bl_pwm: pmic-lcd-bl-pwm-state {
		pins = "gpio8";
		function = "func1";
		bias-disable;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
		output-low;
		power-source = <0>;
	};
};

&pm7325_gpios {
	key_vol_up_default: key-vol-up-state {
		pins = "gpio6";
		function = "normal";
		input-enable;
		bias-pull-up;
		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
	};
};

&pm8350c_pwm {
	pinctrl-0 = <&pmic_lcd_bl_pwm>;
	pinctrl-names = "default";
	status = "okay";

	multi-led {
		color = <LED_COLOR_ID_RGB>;
		function = LED_FUNCTION_STATUS;

		#address-cells = <1>;
		#size-cells = <0>;

		led@1 {
			reg = <1>;
			color = <LED_COLOR_ID_RED>;
		};

		led@2 {
			reg = <2>;
			color = <LED_COLOR_ID_GREEN>;
		};

		led@3 {
			reg = <3>;
			color = <LED_COLOR_ID_BLUE>;
		};
	};
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;
	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/qcm6490/adsp.mbn";
	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/qcm6490/cdsp.mbn";
	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/qcm6490/modem.mbn";
	status = "okay";
};

&remoteproc_wpss {
	firmware-name = "qcom/qcm6490/wpss.mbn";
	status = "okay";
};

&sdc2_clk {
	bias-disable;
	drive-strength = <16>;
};

&sdc2_cmd {
	bias-pull-up;
	drive-strength = <10>;
};

&sdc2_data {
	bias-pull-up;
	drive-strength = <10>;
};

&sdhc_1 {
	non-removable;
	no-sd;
	no-sdio;

	vmmc-supply = <&vreg_l7b_2p952>;
	vqmmc-supply = <&vreg_l19b_1p8>;

	status = "okay";
};

&sdhc_2 {
	status = "okay";

	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;

	vmmc-supply = <&vreg_l9c_2p96>;
	vqmmc-supply = <&vreg_l6c_2p96>;

	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};

&sound {
	compatible = "qcom,qcm6490-idp-sndcard";
	model = "QCM6490-IDP";

	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
			"SpkrRight IN", "WSA_SPK2 OUT",
			"IN1_HPHL", "HPHL_OUT",
			"IN2_HPHR", "HPHR_OUT",
			"AMIC2", "MIC BIAS2",
			"TX DMIC0", "MIC BIAS1",
			"TX DMIC1", "MIC BIAS2",
			"TX DMIC2", "MIC BIAS3",
			"TX SWR_ADC1", "ADC2_OUTPUT",
			"VA DMIC0", "VA MIC BIAS3",
			"VA DMIC1", "VA MIC BIAS3",
			"VA DMIC2", "VA MIC BIAS1",
			"VA DMIC3", "VA MIC BIAS1";

	wsa-dai-link {
		link-name = "WSA Playback";

		codec {
			sound-dai = <&left_spkr>, <&right_spkr>,
				    <&swr2 0>, <&lpass_wsa_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};

	wcd-playback-dai-link {
		link-name = "WCD Playback";

		codec {
			sound-dai = <&wcd9370 0>, <&swr0 0>, <&lpass_rx_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};

	wcd-capture-dai-link {
		link-name = "WCD Capture";

		codec {
			sound-dai = <&wcd9370 1>, <&swr1 0>, <&lpass_tx_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};

	va-dai-link {
		link-name = "VA Capture";

		codec {
			sound-dai = <&lpass_va_macro 0>;
		};

		cpu {
			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
		};

		platform {
			sound-dai = <&q6apm>;
		};
	};
};

&swr0 {
	status = "okay";

	wcd937x_rx: codec@0,4 {
		compatible = "sdw20217010a00";
		reg = <0 4>;

		/*
		 * WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
		 * WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
		 * WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
		 * WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
		 * WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
		 */
		qcom,rx-port-mapping = <1 2 3 4 5>;

		/*
		 * Static channels mapping between slave and master rx port channels.
		 * In the order of slave port channels, which is
		 * hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
		 */
		qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
	};
};

&swr1 {
	status = "okay";

	wcd937x_tx: codec@0,3 {
		compatible = "sdw20217010a00";
		reg = <0 3>;

		/*
		 * WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
		 * WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
		 * WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
		 * WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
		 */
		qcom,tx-port-mapping = <1 1 2 3>;

		/*
		 * Static channel mapping between slave and master tx port channels.
		 * In the order of slave port channels which is adc1, adc2, adc3,
		 * mic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
		 */
		qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
	};
};

&swr2 {
	status = "okay";

	left_spkr: speaker@0,1 {
		compatible = "sdw10217020200";
		reg = <0 1>;
		powerdown-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "SpkrLeft";
		#thermal-sensor-cells = <0>;
		vdd-supply = <&vreg_l18b_1p8>;
		qcom,port-mapping = <1 2 3 7>;
	};

	right_spkr: speaker@0,2 {
		compatible = "sdw10217020200";
		reg = <0 2>;
		powerdown-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
		#sound-dai-cells = <0>;
		sound-name-prefix = "SpkrRight";
		#thermal-sensor-cells = <0>;
		vdd-supply = <&vreg_l18b_1p8>;
		qcom,port-mapping = <4 5 6 8>;
	};
};

&tlmm {
	gpio-reserved-ranges = <32 2>, /* ADSP */
			       <48 4>; /* NFC */

	sd_cd: sd-cd-state {
		pins = "gpio91";
		function = "gpio";
		bias-pull-up;
	};

	wcd_default: wcd-reset-n-active-state {
		pins = "gpio83";
		function = "gpio";
		drive-strength = <16>;
		bias-disable;
	};
};

&uart5 {
	status = "okay";
};

&ufs_mem_hc {
	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
	vcc-supply = <&vreg_l7b_2p952>;
	vcc-max-microamp = <800000>;
	vccq-supply = <&vreg_l9b_1p2>;
	vccq-max-microamp = <900000>;
	vccq2-supply = <&vreg_l9b_1p2>;
	vccq2-max-microamp = <900000>;

	status = "okay";
};

&ufs_mem_phy {
	vdda-phy-supply = <&vreg_l10c_0p88>;
	vdda-pll-supply = <&vreg_l6b_1p2>;

	status = "okay";
};

&usb_1 {
	dr_mode = "peripheral";

	status = "okay";
};

&usb_1_hsphy {
	vdda-pll-supply = <&vreg_l10c_0p88>;
	vdda33-supply = <&vreg_l2b_3p072>;
	vdda18-supply = <&vreg_l1c_1p8>;

	status = "okay";
};

&usb_1_qmpphy {
	vdda-phy-supply = <&vreg_l6b_1p2>;
	vdda-pll-supply = <&vreg_l1b_0p912>;

	status = "okay";
};

&wifi {
	memory-region = <&wlan_fw_mem>;
	qcom,calibration-variant = "Qualcomm_qcm6490idp";

	status = "okay";
};

&lpass_audiocc {
	compatible = "qcom,qcm6490-lpassaudiocc";
	/delete-property/ power-domains;
};