// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, The Linux Foundation. All rights reserved. * Copyright (c) 2022, Linaro Limited */ /dts-v1/; #include #include #include #include #include #include #include "sc8280xp.dtsi" #include "sc8280xp-pmics.dtsi" / { model = "Lenovo ThinkPad X13s"; compatible = "lenovo,thinkpad-x13s", "qcom,sc8280xp"; aliases { i2c4 = &i2c4; i2c21 = &i2c21; serial1 = &uart2; }; wcd938x: audio-codec { compatible = "qcom,wcd9380-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_s10b>; vdd-rxtx-supply = <&vreg_s10b>; vdd-io-supply = <&vreg_s10b>; vdd-mic-bias-supply = <&vreg_bob>; qcom,micbias1-microvolt = <1800000>; qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; #sound-dai-cells = <1>; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&pmc8280c_lpg 3 1000000>; enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_bl>; pinctrl-names = "default"; pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; }; gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&hall_int_n_default>; switch-lid { gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,input-type = ; linux,code = ; wakeup-source; wakeup-event-action = ; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&cam_indicator_en>; led-camera-indicator { label = "white:camera-indicator"; function = LED_FUNCTION_INDICATOR; color = ; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; linux,default-trigger = "none"; default-state = "off"; /* Reuse as a panic indicator until we get a "camera on" trigger */ panic-indicator; }; }; pmic-glink { compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, <&tlmm 49 GPIO_ACTIVE_HIGH>; connector@0 { compatible = "usb-c-connector"; reg = <0>; power-role = "dual"; data-role = "dual"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pmic_glink_con0_hs: endpoint { remote-endpoint = <&usb_0_dwc3_hs>; }; }; port@1 { reg = <1>; pmic_glink_con0_ss: endpoint { remote-endpoint = <&usb_0_qmpphy_out>; }; }; port@2 { reg = <2>; pmic_glink_con0_sbu: endpoint { remote-endpoint = <&usb0_sbu_mux>; }; }; }; }; connector@1 { compatible = "usb-c-connector"; reg = <1>; power-role = "dual"; data-role = "dual"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pmic_glink_con1_hs: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; port@1 { reg = <1>; pmic_glink_con1_ss: endpoint { remote-endpoint = <&usb_1_qmpphy_out>; }; }; port@2 { reg = <2>; pmic_glink_con1_sbu: endpoint { remote-endpoint = <&usb1_sbu_mux>; }; }; }; }; }; vreg_edp_3p3: regulator-edp-3p3 { compatible = "regulator-fixed"; regulator-name = "VCC3LCD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&edp_reg_en>; regulator-boot-on; }; vreg_edp_bl: regulator-edp-bl { compatible = "regulator-fixed"; regulator-name = "VBL9"; regulator-min-microvolt = <3600000>; regulator-max-microvolt = <3600000>; gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&edp_bl_reg_en>; regulator-boot-on; }; vreg_misc_3p3: regulator-misc-3p3 { compatible = "regulator-fixed"; regulator-name = "VCC3B"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&misc_3p3_reg_en>; regulator-boot-on; regulator-always-on; }; vreg_nvme: regulator-nvme { compatible = "regulator-fixed"; regulator-name = "VCC3_SSD"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&nvme_reg_en>; regulator-boot-on; }; vreg_vph_pwr: regulator-vph-pwr { compatible = "regulator-fixed"; regulator-name = "VPH_VCC3R9"; regulator-min-microvolt = <3900000>; regulator-max-microvolt = <3900000>; regulator-always-on; }; vreg_wlan: regulator-wlan { compatible = "regulator-fixed"; regulator-name = "VCC_WLAN_3R9"; regulator-min-microvolt = <3900000>; regulator-max-microvolt = <3900000>; gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&hastings_reg_en>; regulator-boot-on; }; vreg_wwan: regulator-wwan { compatible = "regulator-fixed"; regulator-name = "VCC3B_WAN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&wwan_sw_en>; regulator-boot-on; }; reserved-memory { gpu_mem: gpu-mem@8bf00000 { reg = <0 0x8bf00000 0 0x2000>; no-map; }; linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; reusable; linux,cma-default; }; }; thermal-zones { pm8008-thermal { polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&pm8008>; trips { trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; }; trip1 { temperature = <115000>; hysteresis = <0>; type = "critical"; }; }; }; skin-temp-thermal { polling-delay-passive = <250>; thermal-sensors = <&pmk8280_adc_tm 5>; trips { skin_temp_alert0: trip-point0 { temperature = <55000>; hysteresis = <1000>; type = "passive"; }; skin_temp_alert1: trip-point1 { temperature = <58000>; hysteresis = <1000>; type = "passive"; }; skin-temp-crit { temperature = <73000>; hysteresis = <1000>; type = "critical"; }; }; cooling-maps { map0 { trip = <&skin_temp_alert0>; cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; map1 { trip = <&skin_temp_alert1>; cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; }; usb0-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb0_sbu_default>; mode-switch; orientation-switch; port { usb0_sbu_mux: endpoint { remote-endpoint = <&pmic_glink_con0_sbu>; }; }; }; usb1-sbu-mux { compatible = "pericom,pi3usb102", "gpio-sbu-mux"; enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb1_sbu_default>; mode-switch; orientation-switch; port { usb1_sbu_mux: endpoint { remote-endpoint = <&pmic_glink_con1_sbu>; }; }; }; wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; pinctrl-0 = <&bt_default>, <&wlan_en>; pinctrl-names = "default"; wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; vddio-supply = <&vreg_s10b>; vddaon-supply = <&vreg_s12b>; vddpmu-supply = <&vreg_s12b>; vddpmumx-supply = <&vreg_s12b>; vddpmucx-supply = <&vreg_s12b>; vddrfa0p95-supply = <&vreg_s12b>; vddrfa1p3-supply = <&vreg_s11b>; vddrfa1p9-supply = <&vreg_s1c>; vddpcie1p3-supply = <&vreg_s11b>; vddpcie1p9-supply = <&vreg_s1c>; regulators { vreg_pmu_rfa_cmn_0p8: ldo0 { regulator-name = "vreg_pmu_rfa_cmn_0p8"; }; vreg_pmu_aon_0p8: ldo1 { regulator-name = "vreg_pmu_aon_0p8"; }; vreg_pmu_wlcx_0p8: ldo2 { regulator-name = "vreg_pmu_wlcx_0p8"; }; vreg_pmu_wlmx_0p8: ldo3 { regulator-name = "vreg_pmu_wlmx_0p8"; }; vreg_pmu_btcmx_0p8: ldo4 { regulator-name = "vreg_pmu_btcmx_0p8"; }; vreg_pmu_pcie_1p8: ldo5 { regulator-name = "vreg_pmu_pcie_1p8"; }; vreg_pmu_pcie_0p9: ldo6 { regulator-name = "vreg_pmu_pcie_0p9"; }; vreg_pmu_rfa_0p8: ldo7 { regulator-name = "vreg_pmu_rfa_0p8"; }; vreg_pmu_rfa_1p2: ldo8 { regulator-name = "vreg_pmu_rfa_1p2"; }; vreg_pmu_rfa_1p7: ldo9 { regulator-name = "vreg_pmu_rfa_1p7"; }; }; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "b"; vdd-l1-l4-supply = <&vreg_s12b>; vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; vdd-l6-l9-l10-supply = <&vreg_s12b>; vdd-l8-supply = <&vreg_s12b>; vreg_s10b: smps10 { regulator-name = "vreg_s10b"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; regulator-always-on; }; vreg_s11b: smps11 { regulator-name = "vreg_s11b"; regulator-min-microvolt = <1272000>; regulator-max-microvolt = <1272000>; regulator-initial-mode = ; }; vreg_s12b: smps12 { regulator-name = "vreg_s12b"; regulator-min-microvolt = <984000>; regulator-max-microvolt = <984000>; regulator-initial-mode = ; }; vreg_l1b: ldo1 { regulator-name = "vreg_l1b"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l3b: ldo3 { regulator-name = "vreg_l3b"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; regulator-boot-on; }; vreg_l4b: ldo4 { regulator-name = "vreg_l4b"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l6b: ldo6 { regulator-name = "vreg_l6b"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; regulator-boot-on; }; }; regulators-1 { compatible = "qcom,pm8350c-rpmh-regulators"; qcom,pmic-id = "c"; vdd-bob-supply = <&vreg_vph_pwr>; vdd-l1-l12-supply = <&vreg_s1c>; vdd-l2-l8-supply = <&vreg_s1c>; vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; vdd-l6-l9-l11-supply = <&vreg_bob>; vdd-l10-supply = <&vreg_s11b>; vreg_s1c: smps1 { regulator-name = "vreg_s1c"; regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1900000>; regulator-initial-mode = ; regulator-always-on; }; vreg_l1c: ldo1 { regulator-name = "vreg_l1c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l8c: ldo8 { regulator-name = "vreg_l8c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l12c: ldo12 { regulator-name = "vreg_l12c"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l13c: ldo13 { regulator-name = "vreg_l13c"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; vreg_bob: bob { regulator-name = "vreg_bob"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; regulator-always-on; }; }; regulators-2 { compatible = "qcom,pm8350-rpmh-regulators"; qcom,pmic-id = "d"; vdd-l1-l4-supply = <&vreg_s11b>; vdd-l2-l7-supply = <&vreg_bob>; vdd-l3-l5-supply = <&vreg_s11b>; vdd-l6-l9-l10-supply = <&vreg_s12b>; vdd-l8-supply = <&vreg_s12b>; vreg_l2d: ldo2 { regulator-name = "vreg_l2d"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; vreg_l3d: ldo3 { regulator-name = "vreg_l3d"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l4d: ldo4 { regulator-name = "vreg_l4d"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l6d: ldo6 { regulator-name = "vreg_l6d"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; }; vreg_l7d: ldo7 { regulator-name = "vreg_l7d"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = ; }; vreg_l8d: ldo8 { regulator-name = "vreg_l8d"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l9d: ldo9 { regulator-name = "vreg_l9d"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l10d: ldo10 { regulator-name = "vreg_l10d"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; }; }; &camss { vdda-phy-supply = <&vreg_l6d>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; ports { port@0 { csiphy0_lanes01_ep: endpoint@0 { reg = <0>; clock-lanes = <7>; data-lanes = <0 1>; remote-endpoint = <&ov5675_ep>; }; }; }; }; &cci2 { status = "okay"; }; &cci2_i2c1 { camera@10 { compatible = "ovti,ov5675"; reg = <0x10>; reset-gpios = <&tlmm 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&cam_rgb_default>; clocks = <&camcc CAMCC_MCLK3_CLK>; orientation = <0>; /* Front facing */ avdd-supply = <&vreg_l6q>; dvdd-supply = <&vreg_l2q>; dovdd-supply = <&vreg_l7q>; port { ov5675_ep: endpoint { data-lanes = <1 2>; link-frequencies = /bits/ 64 <450000000>; remote-endpoint = <&csiphy0_lanes01_ep>; }; }; }; }; &dispcc0 { status = "okay"; }; &gpu { status = "okay"; zap-shader { memory-region = <&gpu_mem>; firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; }; }; &mdss0 { status = "okay"; }; &mdss0_dp0 { status = "okay"; }; &mdss0_dp0_out { data-lanes = <0 1>; remote-endpoint = <&usb_0_qmpphy_dp_in>; }; &mdss0_dp1 { status = "okay"; }; &mdss0_dp1_out { data-lanes = <0 1>; remote-endpoint = <&usb_1_qmpphy_dp_in>; }; &mdss0_dp3 { compatible = "qcom,sc8280xp-edp"; /delete-property/ #sound-dai-cells; data-lanes = <0 1 2 3>; status = "okay"; aux-bus { panel { compatible = "edp-panel"; backlight = <&backlight>; power-supply = <&vreg_edp_3p3>; port { edp_panel_in: endpoint { remote-endpoint = <&mdss0_dp3_out>; }; }; }; }; ports { port@1 { reg = <1>; mdss0_dp3_out: endpoint { remote-endpoint = <&edp_panel_in>; }; }; }; }; &mdss0_dp3_phy { compatible = "qcom,sc8280xp-edp-phy"; vdda-phy-supply = <&vreg_l6b>; vdda-pll-supply = <&vreg_l3b>; status = "okay"; }; &i2c4 { clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_default>; status = "okay"; touchscreen@10 { compatible = "elan,ekth5015m", "elan,ekth6915"; reg = <0x10>; interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tlmm 99 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; no-reset-on-power-off; vcc33-supply = <&vreg_misc_3p3>; vccio-supply = <&vreg_misc_3p3>; pinctrl-names = "default"; pinctrl-0 = <&ts0_default>; }; }; &i2c11 { clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c11_default>; status = "okay"; pm8008: pmic@c { compatible = "qcom,pm8008"; reg = <0xc>; interrupts-extended = <&tlmm 41 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; vdd-l1-l2-supply = <&vreg_s11b>; vdd-l3-l4-supply = <&vreg_bob>; vdd-l5-supply = <&vreg_bob>; vdd-l6-supply = <&vreg_bob>; vdd-l7-supply = <&vreg_bob>; pinctrl-names = "default"; pinctrl-0 = <&pm8008_default>; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pm8008 0 0 2>; interrupt-controller; #interrupt-cells = <2>; #thermal-sensor-cells = <0>; regulators { vreg_l1q: ldo1 { regulator-name = "vreg_l1q"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; vreg_l2q: ldo2 { regulator-name = "vreg_l2q"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; vreg_l3q: ldo3 { regulator-name = "vreg_l3q"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; vreg_l4q: ldo4 { regulator-name = "vreg_l4q"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; vreg_l5q: ldo5 { regulator-name = "vreg_l5q"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vreg_l6q: ldo6 { regulator-name = "vreg_l6q"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; vreg_l7q: ldo7 { regulator-name = "vreg_l7q"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; }; }; }; &i2c21 { clock-frequency = <400000>; pinctrl-names = "default"; pinctrl-0 = <&i2c21_default>, <&tpad_default>; status = "okay"; touchpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; vddl-supply = <&vreg_s10b>; wakeup-source; }; touchpad@2c { compatible = "hid-over-i2c"; reg = <0x2c>; hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; vddl-supply = <&vreg_s10b>; wakeup-source; }; keyboard@68 { compatible = "hid-over-i2c"; reg = <0x68>; hid-descr-addr = <0x1>; interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; vdd-supply = <&vreg_misc_3p3>; vddl-supply = <&vreg_s10b>; pinctrl-names = "default"; pinctrl-0 = <&kybd_default>; wakeup-source; }; }; &pcie2a { perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&vreg_nvme>; pinctrl-names = "default"; pinctrl-0 = <&pcie2a_default>; status = "okay"; }; &pcie2a_phy { vdda-phy-supply = <&vreg_l6d>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; &pcie3a { perst-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&vreg_wwan>; pinctrl-names = "default"; pinctrl-0 = <&pcie3a_default>; status = "okay"; }; &pcie3a_phy { vdda-phy-supply = <&vreg_l6d>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; &pcie4 { max-link-speed = <2>; perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&vreg_wlan>; pinctrl-names = "default"; pinctrl-0 = <&pcie4_default>; status = "okay"; }; &pcie4_port0 { wifi@0 { compatible = "pci17cb,1103"; reg = <0x10000 0x0 0x0 0x0 0x0>; vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; vddaon-supply = <&vreg_pmu_aon_0p8>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; qcom,ath11k-calibration-variant = "LE_X13S"; }; }; &pcie4_phy { vdda-phy-supply = <&vreg_l6d>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; &pmc8280c_lpg { status = "okay"; }; &pmk8280_adc_tm { status = "okay"; sys-therm@0 { reg = <0>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@1 { reg = <1>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@2 { reg = <2>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@3 { reg = <3>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@4 { reg = <4>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@5 { reg = <5>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@6 { reg = <6>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; sys-therm@7 { reg = <7>; io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; qcom,hw-settle-time-us = <200>; qcom,avg-samples = <2>; qcom,ratiometric; }; }; &pmk8280_pon_pwrkey { status = "okay"; }; &pmk8280_pon_resin { status = "okay"; }; &pmk8280_rtc { nvmem-cells = <&rtc_offset>; nvmem-cell-names = "offset"; status = "okay"; }; &pmk8280_sdam_6 { status = "okay"; rtc_offset: rtc-offset@bc { reg = <0xbc 0x4>; }; }; &pmk8280_vadc { channel@144 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm1"; }; channel@145 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm2"; }; channel@146 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm3"; }; channel@147 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm4"; }; channel@344 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm5"; }; channel@345 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm6"; }; channel@346 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm7"; }; channel@347 { reg = ; qcom,hw-settle-time = <200>; qcom,ratiometric; label = "sys_therm8"; }; }; &qup0 { status = "okay"; }; &qup1 { status = "okay"; }; &qup2 { status = "okay"; }; &remoteproc_adsp { firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcadsp8280.mbn"; status = "okay"; }; &remoteproc_nsp0 { firmware-name = "qcom/sc8280xp/LENOVO/21BX/qccdsp8280.mbn"; status = "okay"; }; &rxmacro { status = "okay"; }; &sound { compatible = "qcom,sc8280xp-sndcard"; model = "SC8280XP-LENOVO-X13S"; audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC2", "MIC BIAS2", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "VA DMIC0", "VA MIC BIAS1", "VA DMIC1", "VA MIC BIAS1", "VA DMIC2", "VA MIC BIAS3", "TX SWR_ADC1", "ADC2_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; cpu { sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; }; codec { sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wcd-capture-dai-link { link-name = "WCD Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wsa-dai-link { link-name = "WSA Playback"; cpu { sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; }; codec { sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; va-dai-link { link-name = "VA Capture"; cpu { sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; }; platform { sound-dai = <&q6apm>; }; codec { sound-dai = <&vamacro 0>; }; }; }; &swr0 { status = "okay"; left_spkr: wsa8830-left@0,1 { compatible = "sdw10217020200"; reg = <0 1>; pinctrl-names = "default"; pinctrl-0 = <&spkr_1_sd_n_default>; powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrLeft"; #sound-dai-cells = <0>; vdd-supply = <&vreg_s10b>; }; right_spkr: wsa8830-right@0,2 { compatible = "sdw10217020200"; reg = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&spkr_2_sd_n_default>; powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>; #thermal-sensor-cells = <0>; sound-name-prefix = "SpkrRight"; #sound-dai-cells = <0>; vdd-supply = <&vreg_s10b>; }; }; &swr1 { status = "okay"; wcd_rx: wcd9380-rx@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; &swr2 { status = "okay"; wcd_tx: wcd9380-tx@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; qcom,tx-port-mapping = <1 1 2 3>; }; }; &txmacro { status = "okay"; }; &uart2 { pinctrl-0 = <&uart2_default>; pinctrl-names = "default"; status = "okay"; bluetooth { compatible = "qcom,wcn6855-bt"; vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; vddaon-supply = <&vreg_pmu_aon_0p8>; vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; max-speed = <3200000>; }; }; &usb_0 { status = "okay"; }; &usb_0_dwc3 { dr_mode = "host"; }; &usb_0_dwc3_hs { remote-endpoint = <&pmic_glink_con0_hs>; }; &usb_0_hsphy { vdda-pll-supply = <&vreg_l9d>; vdda18-supply = <&vreg_l1c>; vdda33-supply = <&vreg_l7d>; status = "okay"; }; &usb_0_qmpphy { vdda-phy-supply = <&vreg_l9d>; vdda-pll-supply = <&vreg_l4d>; orientation-switch; status = "okay"; }; &usb_0_qmpphy_dp_in { remote-endpoint = <&mdss0_dp0_out>; }; &usb_0_qmpphy_out { remote-endpoint = <&pmic_glink_con0_ss>; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "host"; }; &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_con1_hs>; }; &usb_1_hsphy { vdda-pll-supply = <&vreg_l4b>; vdda18-supply = <&vreg_l1c>; vdda33-supply = <&vreg_l13c>; status = "okay"; }; &usb_1_qmpphy { vdda-phy-supply = <&vreg_l4b>; vdda-pll-supply = <&vreg_l3b>; orientation-switch; status = "okay"; }; &usb_1_qmpphy_dp_in { remote-endpoint = <&mdss0_dp1_out>; }; &usb_1_qmpphy_out { remote-endpoint = <&pmic_glink_con1_ss>; }; &usb_2 { status = "okay"; }; &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l1b>; vdda18-supply = <&vreg_l1c>; vdda33-supply = <&vreg_l7d>; status = "okay"; }; &usb_2_hsphy1 { vdda-pll-supply = <&vreg_l8d>; vdda18-supply = <&vreg_l1c>; vdda33-supply = <&vreg_l7d>; status = "okay"; }; &usb_2_hsphy2 { vdda-pll-supply = <&vreg_l10d>; vdda18-supply = <&vreg_l8c>; vdda33-supply = <&vreg_l2d>; status = "okay"; }; &usb_2_hsphy3 { vdda-pll-supply = <&vreg_l10d>; vdda18-supply = <&vreg_l8c>; vdda33-supply = <&vreg_l2d>; status = "okay"; }; &usb_2_qmpphy0 { vdda-phy-supply = <&vreg_l1b>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; &usb_2_qmpphy1 { vdda-phy-supply = <&vreg_l8d>; vdda-pll-supply = <&vreg_l4d>; status = "okay"; }; &vamacro { pinctrl-0 = <&dmic01_default>, <&dmic23_default>; pinctrl-names = "default"; vdd-micb-supply = <&vreg_s10b>; qcom,dmic-sample-rate = <4800000>; status = "okay"; }; &wsamacro { status = "okay"; }; &xo_board_clk { clock-frequency = <38400000>; }; /* PINCTRL */ &lpass_tlmm { status = "okay"; }; &pmc8280_1_gpios { edp_bl_en: edp-bl-en-state { pins = "gpio8"; function = "normal"; }; edp_bl_reg_en: edp-bl-reg-en-state { pins = "gpio9"; function = "normal"; }; misc_3p3_reg_en: misc-3p3-reg-en-state { pins = "gpio1"; function = "normal"; }; }; &pmc8280_2_gpios { wwan_sw_en: wwan-sw-en-state { pins = "gpio1"; function = "normal"; }; }; &pmc8280c_gpios { edp_bl_pwm: edp-bl-pwm-state { pins = "gpio8"; function = "func1"; }; }; &pmr735a_gpios { hastings_reg_en: hastings-reg-en-state { pins = "gpio1"; function = "normal"; }; }; &tlmm { gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; bt_default: bt-default-state { hstp-bt-en-pins { pins = "gpio133"; function = "gpio"; drive-strength = <16>; bias-disable; }; hstp-sw-ctrl-pins { pins = "gpio132"; function = "gpio"; bias-pull-down; }; }; cam_indicator_en: cam-indicator-en-state { pins = "gpio28"; function = "gpio"; drive-strength = <2>; bias-disable; }; cam_rgb_default: cam-rgb-default-state { mclk-pins { pins = "gpio17"; function = "cam_mclk"; drive-strength = <16>; bias-disable; }; sc-rgb-xshut-n-pins { pins = "gpio15"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; drive-strength = <16>; bias-disable; }; hall_int_n_default: hall-int-n-state { pins = "gpio107"; function = "gpio"; bias-disable; }; i2c4_default: i2c4-default-state { pins = "gpio171", "gpio172"; function = "qup4"; drive-strength = <16>; bias-disable; }; i2c11_default: i2c11-default-state { pins = "gpio18", "gpio19"; function = "qup11"; drive-strength = <16>; bias-disable; }; i2c21_default: i2c21-default-state { pins = "gpio81", "gpio82"; function = "qup21"; drive-strength = <16>; bias-disable; }; kybd_default: kybd-default-state { disable-pins { pins = "gpio102"; function = "gpio"; output-low; }; int-n-pins { pins = "gpio104"; function = "gpio"; bias-disable; }; reset-pins { pins = "gpio105"; function = "gpio"; bias-disable; }; }; nvme_reg_en: nvme-reg-en-state { pins = "gpio135"; function = "gpio"; drive-strength = <2>; bias-disable; }; pcie2a_default: pcie2a-default-state { clkreq-n-pins { pins = "gpio142"; function = "pcie2a_clkreq"; drive-strength = <2>; bias-pull-up; }; perst-n-pins { pins = "gpio143"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake-n-pins { pins = "gpio145"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie3a_default: pcie3a-default-state { clkreq-n-pins { pins = "gpio150"; function = "pcie3a_clkreq"; drive-strength = <2>; bias-pull-up; }; perst-n-pins { pins = "gpio151"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake-n-pins { pins = "gpio148"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pcie4_default: pcie4-default-state { clkreq-n-pins { pins = "gpio140"; function = "pcie4_clkreq"; drive-strength = <2>; bias-pull-up; }; perst-n-pins { pins = "gpio141"; function = "gpio"; drive-strength = <2>; bias-disable; }; wake-n-pins { pins = "gpio139"; function = "gpio"; drive-strength = <2>; bias-pull-up; }; }; pm8008_default: pm8008-default-state { int-pins { pins = "gpio41"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; reset-n-pins { pins = "gpio42"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; spkr_1_sd_n_default: spkr-1-sd-n-default-state { perst-n-pins { pins = "gpio178"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; spkr_2_sd_n_default: spkr-2-sd-n-default-state { perst-n-pins { pins = "gpio179"; function = "gpio"; drive-strength = <16>; bias-disable; output-high; }; }; tpad_default: tpad-default-state { int-n-pins { pins = "gpio182"; function = "gpio"; bias-disable; }; }; ts0_default: ts0-default-state { int-n-pins { pins = "gpio175"; function = "gpio"; bias-disable; }; reset-n-pins { pins = "gpio99"; function = "gpio"; drive-strength = <2>; bias-disable; }; }; uart2_default: uart2-default-state { cts-pins { pins = "gpio121"; function = "qup2"; bias-bus-hold; }; rts-pins { pins = "gpio122"; function = "qup2"; drive-strength = <2>; bias-disable; }; rx-pins { pins = "gpio124"; function = "qup2"; bias-pull-up; }; tx-pins { pins = "gpio123"; function = "qup2"; drive-strength = <2>; bias-disable; }; }; usb0_sbu_default: usb0-sbu-state { oe-n-pins { pins = "gpio101"; function = "gpio"; bias-disable; drive-strength = <16>; output-high; }; sel-pins { pins = "gpio164"; function = "gpio"; bias-disable; drive-strength = <16>; }; }; usb1_sbu_default: usb1-sbu-state { oe-n-pins { pins = "gpio48"; function = "gpio"; bias-disable; drive-strength = <16>; output-high; }; sel-pins { pins = "gpio47"; function = "gpio"; bias-disable; drive-strength = <16>; }; }; wcd_default: wcd-default-state { reset-pins { pins = "gpio106"; function = "gpio"; bias-disable; }; }; wlan_en: wlan-en-state { pins = "gpio134"; function = "gpio"; drive-strength = <8>; bias-pull-down; }; };