// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd. */ /dts-v1/; #include #include #include #include "rk3399.dtsi" / { model = "OPEN AI LAB EAIDK-610"; compatible = "openailab,eaidk-610", "rockchip,rk3399"; aliases { ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; }; backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm0 0 25000 0>; brightness-levels = < 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; default-brightness-level = <200>; }; clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; clock-output-names = "clkin_gmac"; #clock-cells = <0>; }; dc_12v: regulator-dc-12v { compatible = "regulator-fixed"; regulator-name = "dc_12v"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; pinctrl-0 = <&pwrbtn>; key-power { debounce-interval = <100>; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; label = "GPIO Key Power"; linux,code = ; wakeup-source; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&work_led_pin>, <&user_led_pin>, <&heartbeat_led_pin>, <&wlan_active_led_pin>, <&bt_active_led_pin>; work_led: led-0 { label = "blue:work"; default-state = "on"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; }; user_led: led-1 { label = "read:user"; default-state = "off"; gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; }; heartbeat_led: led-2 { label = "green:heartbeat"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; }; wlan_active_led: led-3 { label = "yellow:wlan"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; }; bt_active_led: led-4 { label = "blue:bt"; gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; linux,default-trigger = "hci0-power"; default-state = "off"; }; }; rt5651-sound { compatible = "simple-audio-card"; simple-audio-card,name = "realtek,rt5651-codec"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; simple-audio-card,widgets = "Microphone", "Mic Jack", "Headphone", "Headphone Jack"; simple-audio-card,routing = "Mic Jack", "MICBIAS1", "IN1P", "Mic Jack", "Headphone Jack", "HPOL", "Headphone Jack", "HPOR"; simple-audio-card,cpu { sound-dai = <&i2s1>; }; simple-audio-card,codec { sound-dai = <&rt5651>; }; }; sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; clock-names = "ext_clock"; pinctrl-names = "default"; pinctrl-0 = <&wifi_enable_h>; /* * On the module itself this is one of these (depending * on the actual card populated): * - SDIO_RESET_L_WL_REG_ON * - PDN (power down when low) */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; /* switched by pmic_sleep */ vcc1v8_s3: vcca1v8_s3: regulator-vcc1v8-s3 { compatible = "regulator-fixed"; regulator-name = "vcc1v8_s3"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vcc_1v8>; }; vcc3v3_sys: regulator-vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&dc_12v>; }; vcc5v0_sys: regulator-vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; /* For USB3.0 Port1/2 */ vcc5v0_host1: regulator-vcc5v0-host1 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host1_en>; regulator-name = "vcc5v0_host1"; regulator-always-on; vin-supply = <&vcc5v0_sys>; }; /* For USB2.0 Port1/2 */ vcc5v0_host3: regulator-vcc5v0-host3 { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host3_en>; regulator-name = "vcc5v0_host3"; regulator-always-on; vin-supply = <&vcc5v0_sys>; }; vcc5v0_typec: regulator-vcc5v0-typec { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_typec_en>; regulator-name = "vcc5v0_typec"; regulator-always-on; vin-supply = <&vcc3v3_sys>; }; vdd_log: regulator-vdd-log { compatible = "regulator-fixed"; regulator-name = "vdd_log"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; }; }; &cpu_l0 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l1 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l2 { cpu-supply = <&vdd_cpu_l>; }; &cpu_l3 { cpu-supply = <&vdd_cpu_l>; }; &cpu_b0 { cpu-supply = <&vdd_cpu_b>; }; &cpu_b1 { cpu-supply = <&vdd_cpu_b>; }; &emmc_phy { status = "okay"; }; &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; clock_in_out = "input"; phy-supply = <&vcc_lan>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x28>; rx_delay = <0x11>; status = "okay"; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; status = "okay"; }; &i2c0 { status = "okay"; rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; interrupt-parent = <&gpio1>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; system-power-controller; wakeup-source; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; vcc10-supply = <&vcc3v3_sys>; vcc11-supply = <&vcc3v3_sys>; vcc12-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_3v0>; regulators { vdd_center: DCDC_REG1 { regulator-name = "vdd_center"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_cpu_l: DCDC_REG2 { regulator-name = "vdd_cpu_l"; regulator-min-microvolt = <750000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; vcc_1v8: DCDC_REG4 { regulator-name = "vcc_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc1v8_dvp: LDO_REG1 { regulator-name = "vcc1v8_dvp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc2v8_dvp: LDO_REG2 { regulator-name = "vcc2v8_dvp"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc1v8_pmu: LDO_REG3 { regulator-name = "vcc1v8_pmu"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcc_sdio: LDO_REG4 { regulator-name = "vcc_sdio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcca3v0_codec: LDO_REG5 { regulator-name = "vcca3v0_codec"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v5: LDO_REG6 { regulator-name = "vcc_1v5"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1500000>; }; }; vcca1v8_codec: LDO_REG7 { regulator-name = "vcca1v8_codec"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v0: LDO_REG8 { regulator-name = "vcc_3v0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3000000>; }; }; vcc3v3_s3: vcc_lan: SWITCH_REG1 { regulator-name = "vcc3v3_s3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_s0: SWITCH_REG2 { regulator-name = "vcc3v3_s0"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; vdd_cpu_b: regulator@40 { compatible = "silergy,syr827"; reg = <0x40>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu_b"; pinctrl-names = "default"; pinctrl-0 = <&vsel1_pin>; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: regulator@41 { compatible = "silergy,syr828"; reg = <0x41>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_gpu"; pinctrl-names = "default"; pinctrl-0 = <&vsel2_pin>; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; regulator-ramp-delay = <1000>; regulator-always-on; regulator-boot-on; vin-supply = <&vcc3v3_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; }; &i2c1 { i2c-scl-rising-time-ns = <300>; i2c-scl-falling-time-ns = <15>; status = "okay"; rt5651: audio-codec@1a { compatible = "realtek,rt5651"; reg = <0x1a>; clocks = <&cru SCLK_I2S_8CH_OUT>; clock-names = "mclk"; hp-det-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; #sound-dai-cells = <0>; }; }; &i2c3 { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>; status = "okay"; }; &i2c4 { i2c-scl-rising-time-ns = <600>; i2c-scl-falling-time-ns = <20>; status = "okay"; fusb0: typec-portc@22 { compatible = "fcs,fusb302"; reg = <0x22>; interrupt-parent = <&gpio1>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&fusb0_int>; vbus-supply = <&vcc5v0_typec>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc0_role_sw: endpoint@0 { remote-endpoint = <&dwc3_0_role_switch>; }; }; }; connector { compatible = "usb-c-connector"; data-role = "dual"; label = "USB-C"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; usbc_hs: endpoint { remote-endpoint = <&u2phy0_typec_hs>; }; }; port@1 { reg = <1>; usbc_ss: endpoint { remote-endpoint = <&tcphy0_typec_ss>; }; }; }; }; }; }; &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; status = "okay"; }; &i2s2 { status = "okay"; }; &io_domains { status = "okay"; audio-supply = <&vcca1v8_codec>; bt656-supply = <&vcc_3v0>; gpio1830-supply = <&vcc_3v0>; sdmmc-supply = <&vcc_sdio>; }; &pmu_io_domains { status = "okay"; pmu1830-supply = <&vcc_3v0>; }; &pinctrl { buttons { pwrbtn: pwrbtn { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; bt { bt_enable_h: bt-enable-h { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_host_wake_l: bt-host-wake-l { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_wake_l: bt-wake-l { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; fusb302x { fusb0_int: fusb0-int { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; lcd-panel { lcd_panel_reset: lcd-panel-reset { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { work_led_pin: work-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; user_led_pin: user-led-pin { rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; }; heartbeat_led_pin: heartbeat-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; wlan_active_led_pin: wlan-led-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; bt_active_led_pin: bt-led-pin { rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; rt5651 { rt5651_hpcon: rt5640-hpcon { rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { wifi_enable_h: wifi-enable-h { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { vcc5v0_typec_en: vcc5v0_typec_en { rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { vcc5v0_host3_en: vcc5v0-host3-en { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; vcc5v0_host1_en: vcc5v0-host1-en { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wifi { wifi_host_wake_l: wifi-host-wake-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pwm0 { status = "okay"; }; &saradc { vref-supply = <&vcca1v8_s3>; status = "okay"; }; &sdio0 { /* WiFi & BT combo module AMPAK AP6255 */ #address-cells = <1>; #size-cells = <0>; bus-width = <4>; clock-frequency = <50000000>; cap-sdio-irq; cap-sd-highspeed; keep-power-in-suspend; mmc-pwrseq = <&sdio_pwrseq>; non-removable; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; status = "okay"; brcmf: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; interrupt-parent = <&gpio0>; interrupts = ; interrupt-names = "host-wake"; pinctrl-names = "default"; pinctrl-0 = <&wifi_host_wake_l>; }; }; &sdmmc { bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; max-frequency = <150000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; status = "okay"; }; &sdhci { bus-width = <8>; non-removable; status = "okay"; }; &tcphy0 { status = "okay"; }; &tcphy0_usb3 { orientation-switch; port { tcphy0_typec_ss: endpoint { remote-endpoint = <&usbc_ss>; }; }; }; &tcphy1 { status = "okay"; }; &tsadc { /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-mode = <1>; /* tshut polarity 0:LOW 1:HIGH */ rockchip,hw-tshut-polarity = <1>; status = "okay"; }; &u2phy0 { status = "okay"; u2phy0_otg: otg-port { status = "okay"; }; u2phy0_host: host-port { phy-supply = <&vcc5v0_host3>; status = "okay"; }; port { u2phy0_typec_hs: endpoint { remote-endpoint = <&usbc_hs>; }; }; }; &u2phy1 { status = "okay"; u2phy1_otg: otg-port { status = "okay"; }; u2phy1_host: host-port { phy-supply = <&vcc5v0_host3>; status = "okay"; }; }; &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; status = "okay"; bluetooth { compatible = "brcm,bcm4345c5"; clocks = <&rk808 1>; clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; max-speed = <1500000>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc3v3_sys>; vddio-supply = <&vcc_1v8>; }; }; &uart2 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usbdrd3_0 { status = "okay"; }; &usbdrd_dwc3_0 { status = "okay"; usb-role-switch; port { #address-cells = <1>; #size-cells = <0>; dwc3_0_role_switch: endpoint@0 { reg = <0>; remote-endpoint = <&usbc0_role_sw>; }; }; }; &usbdrd3_1 { status = "okay"; }; &usbdrd_dwc3_1 { status = "okay"; dr_mode = "host"; }; &vopb { status = "okay"; }; &vopb_mmu { status = "okay"; }; &vopl { status = "okay"; }; &vopl_mmu { status = "okay"; };