// SPDX-License-Identifier: (GPL-2.0+ OR MIT) #include #include #include #include #include #include "rk3568.dtsi" / { aliases { mmc0 = &sdhci; mmc1 = &sdmmc0; }; chosen { stdout-path = "serial2:1500000n8"; }; hdmi-con { compatible = "hdmi-connector"; type = "a"; port { hdmi_con_in: endpoint { remote-endpoint = <&hdmi_out_con>; }; }; }; ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_ir_m0>; }; keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&factory>; button-factory { label = "factory"; linux,code = ; gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; debounce-interval = <50>; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&green_led>, <&red_led>, <&work_led>; led-0 { color = ; function = LED_FUNCTION_WAN; gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "netdev"; }; led-1 { color = ; function = LED_FUNCTION_DISK; gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; }; led-2 { color = ; function = LED_FUNCTION_STATUS; gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; }; vcc0v9_2g5: regulator-0v9-vcc-2g5 { compatible = "regulator-fixed"; regulator-name = "vcc0v9_2g5"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; vin-supply = <&vcc5v0_sys>; }; vcc12v_dcinp: regulator-12v-vcc-dcinp { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcinp"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <12000000>; regulator-max-microvolt = <12000000>; }; vcc3v3_pi6c_05: regulator-3v3-vcc-pi6c-05 { compatible = "regulator-fixed"; enable-active-high; gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&lan_power_en>; regulator-name = "vcc3v3_pi6c_05"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; vcc3v3_sd: regulator-3v3-vcc-sd { compatible = "regulator-fixed"; enable-active-high; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&sd_pwren>; regulator-name = "vcc3v3_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc3v3_sys>; }; vcc3v3_sys: regulator-3v3-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vcc5v0_sys>; }; vcc5v0_sys: regulator-5v0-vcc-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc12v_dcinp>; }; vcc5v0_usb30_otg0: regulator-5v0-vcc-usb30-otg0 { compatible = "regulator-fixed"; enable-active-high; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_power_en>; regulator-name = "vcc5v0_usb30_otg0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_sys>; }; }; &combphy0 { status = "okay"; }; &combphy1 { status = "okay"; }; &combphy2 { status = "okay"; }; &cpu0 { cpu-supply = <&vdd_cpu>; }; &cpu1 { cpu-supply = <&vdd_cpu>; }; &cpu2 { cpu-supply = <&vdd_cpu>; }; &cpu3 { cpu-supply = <&vdd_cpu>; }; &gpu { mali-supply = <&vdd_gpu>; status = "okay"; }; &hdmi { avdd-0v9-supply = <&vdda0v9_image>; avdd-1v8-supply = <&vcca1v8_image>; status = "okay"; }; &hdmi_in { hdmi_in_vp0: endpoint { remote-endpoint = <&vp0_out_hdmi>; }; }; &hdmi_out { hdmi_out_con: endpoint { remote-endpoint = <&hdmi_con_in>; }; }; &hdmi_sound { status = "okay"; }; &i2c0 { status = "okay"; vdd_cpu: regulator@1c { compatible = "tcs,tcs4525"; reg = <0x1c>; fcs,suspend-voltage-selector = <1>; regulator-name = "vdd_cpu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1150000>; regulator-ramp-delay = <2300>; vin-supply = <&vcc5v0_sys>; regulator-state-mem { regulator-off-in-suspend; }; }; rk809: pmic@20 { compatible = "rockchip,rk809"; reg = <0x20>; #clock-cells = <1>; interrupt-parent = <&gpio0>; interrupts = ; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>; system-power-controller; wakeup-source; vcc1-supply = <&vcc3v3_sys>; vcc2-supply = <&vcc3v3_sys>; vcc3-supply = <&vcc3v3_sys>; vcc4-supply = <&vcc3v3_sys>; vcc5-supply = <&vcc3v3_sys>; vcc6-supply = <&vcc3v3_sys>; vcc7-supply = <&vcc3v3_sys>; vcc8-supply = <&vcc3v3_sys>; vcc9-supply = <&vcc3v3_sys>; regulators { vdd_logic: DCDC_REG1 { regulator-name = "vdd_logic"; regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_ddr: DCDC_REG3 { regulator-name = "vcc_ddr"; regulator-always-on; regulator-boot-on; regulator-initial-mode = <0x2>; regulator-state-mem { regulator-on-in-suspend; }; }; vdd_npu: DCDC_REG4 { regulator-name = "vdd_npu"; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; regulator-ramp-delay = <6001>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_1v8: DCDC_REG5 { regulator-name = "vcc_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_image: LDO_REG1 { regulator-name = "vdda0v9_image"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda_0v9: LDO_REG2 { regulator-name = "vdda_0v9"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-off-in-suspend; }; }; vdda0v9_pmu: LDO_REG3 { regulator-name = "vdda0v9_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <900000>; }; }; vccio_acodec: LDO_REG4 { regulator-name = "vccio_acodec"; regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vccio_sd: LDO_REG5 { regulator-name = "vccio_sd"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3_pmu: LDO_REG6 { regulator-name = "vcc3v3_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; vcca_1v8: LDO_REG7 { regulator-name = "vcca_1v8"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcca1v8_pmu: LDO_REG8 { regulator-name = "vcca1v8_pmu"; regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <1800000>; }; }; vcca1v8_image: LDO_REG9 { regulator-name = "vcca1v8_image"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; vcc_3v3: SWITCH_REG1 { regulator-name = "vcc_3v3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; vcc3v3: SWITCH_REG2 { regulator-name = "vcc3v3"; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; }; }; }; &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2m1_xfer>; status = "okay"; }; &i2s0_8ch { status = "okay"; }; &pcie2x1 { pinctrl-names = "default"; pinctrl-0 = <&wifi_perstn>; reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pi6c_05>; status = "okay"; }; &pcie30phy { data-lanes = <1 2>; status = "okay"; }; &pcie3x1 { num-lanes = <1>; pinctrl-names = "default"; pinctrl-0 = <&lan_resetb>; reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pi6c_05>; status = "okay"; }; &pcie3x2 { num-lanes = <1>; pinctrl-names = "default"; pinctrl-0 = <&lan_reseta>; reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>; vpcie3v3-supply = <&vcc3v3_pi6c_05>; status = "okay"; }; &pinctrl { keys { factory: factory { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; leds { green_led: green-led { rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; red_led: red-led { rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; }; work_led: work-led { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ir { pwm3_ir_m0: pwm3-ir-m0 { rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; mmc { sd_pwren: sd-pwren { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pcie { lan_power_en: lan-power-en { rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; }; lan_reseta: lan-reseta { rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; lan_resetb: lan-resetb { rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; wifi_perstn: wifi-perstn { rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { pmic_int: pmic-int { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb { usb_power_en: usb-power-en { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; &pmu_io_domains { pmuio1-supply = <&vcc3v3_pmu>; pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio2-supply = <&vcc_1v8>; vccio3-supply = <&vccio_sd>; vccio4-supply = <&vcc_1v8>; vccio5-supply = <&vcc_3v3>; vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; status = "okay"; }; &pwm0 { status = "okay"; }; &saradc { vref-supply = <&vcca_1v8>; status = "okay"; }; /* Via Type-C adapter */ &sata0 { status = "okay"; }; &sdhci { bus-width = <8>; cap-mmc-highspeed; max-frequency = <200000000>; mmc-hs200-1_8v; non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; vmmc-supply = <&vcc_3v3>; vqmmc-supply = <&vcc_1v8>; status = "okay"; }; &sdmmc0 { bus-width = <4>; cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; &uart2 { status = "okay"; }; &usb_host0_ehci { status = "okay"; }; &usb_host0_ohci { status = "okay"; }; &usb_host1_ehci { status = "okay"; }; &usb_host1_ohci { status = "okay"; }; &usb_host1_xhci { status = "okay"; }; &usb2phy0 { status = "okay"; }; &usb2phy0_host { phy-supply = <&vcc5v0_usb30_otg0>; status = "okay"; }; &usb2phy1 { status = "okay"; }; &usb2phy1_host { phy-supply = <&vcc5v0_usb30_otg0>; status = "okay"; }; &usb2phy1_otg { phy-supply = <&vcc5v0_usb30_otg0>; status = "okay"; }; &vop { assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; status = "okay"; }; &vop_mmu { status = "okay"; }; &vp0 { vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { reg = ; remote-endpoint = <&hdmi_in_vp0>; }; };