/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This file contains miscellaneous low-level functions. * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) * * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include .text _GLOBAL(__bswapdi2) EXPORT_SYMBOL(__bswapdi2) srdi r8,r3,32 rlwinm r7,r3,8,0xffffffff rlwimi r7,r3,24,0,7 rlwinm r9,r8,8,0xffffffff rlwimi r7,r3,24,16,23 rlwimi r9,r8,24,0,7 rlwimi r9,r8,24,16,23 sldi r7,r7,32 or r3,r7,r9 blr #ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX _GLOBAL(rmci_on) sync isync li r3,0x100 rldicl r3,r3,32,0 mfspr r5,SPRN_HID4 or r5,r5,r3 sync mtspr SPRN_HID4,r5 isync slbia isync sync blr _GLOBAL(rmci_off) sync isync li r3,0x100 rldicl r3,r3,32,0 mfspr r5,SPRN_HID4 andc r5,r5,r3 sync mtspr SPRN_HID4,r5 isync slbia isync sync blr #endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */ #ifdef CONFIG_PPC_PMAC /* * Do an IO access in real mode */ _GLOBAL(real_readb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync mfspr r6,SPRN_HID4 rldicl r5,r6,32,0 ori r5,r5,0x100 rldicl r5,r5,32,0 sync mtspr SPRN_HID4,r5 isync slbia isync lbz r3,0(r3) sync mtspr SPRN_HID4,r6 isync slbia isync mtmsrd r7 sync isync blr /* * Do an IO access in real mode */ _GLOBAL(real_writeb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync mfspr r6,SPRN_HID4 rldicl r5,r6,32,0 ori r5,r5,0x100 rldicl r5,r5,32,0 sync mtspr SPRN_HID4,r5 isync slbia isync stb r3,0(r4) sync mtspr SPRN_HID4,r6 isync slbia isync mtmsrd r7 sync isync blr #endif // CONFIG_PPC_PMAC #ifdef CONFIG_PPC_PASEMI _GLOBAL(real_205_readb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync LBZCIX(R3,R0,R3) isync mtmsrd r7 sync isync blr _GLOBAL(real_205_writeb) mfmsr r7 ori r0,r7,MSR_DR xori r0,r0,MSR_DR sync mtmsrd r0 sync isync STBCIX(R3,R0,R4) isync mtmsrd r7 sync isync blr #endif /* CONFIG_PPC_PASEMI */ #ifdef CONFIG_CPU_FREQ_PMAC64 /* * SCOM access functions for 970 (FX only for now) * * unsigned long scom970_read(unsigned int address); * void scom970_write(unsigned int address, unsigned long value); * * The address passed in is the 24 bits register address. This code * is 970 specific and will not check the status bits, so you should * know what you are doing. */ _GLOBAL(scom970_read) /* interrupts off */ mfmsr r4 ori r0,r4,MSR_EE xori r0,r0,MSR_EE mtmsrd r0,1 /* rotate 24 bits SCOM address 8 bits left and mask out its low 8 bits * (including parity). On current CPUs they must be 0'd, * and finally or in RW bit */ rlwinm r3,r3,8,0,15 ori r3,r3,0x8000 /* do the actual scom read */ sync mtspr SPRN_SCOMC,r3 isync mfspr r3,SPRN_SCOMD isync mfspr r0,SPRN_SCOMC isync /* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah * that's the best we can do). Not implemented yet as we don't use * the scom on any of the bogus CPUs yet, but may have to be done * ultimately */ /* restore interrupts */ mtmsrd r4,1 blr _GLOBAL(scom970_write) /* interrupts off */ mfmsr r5 ori r0,r5,MSR_EE xori r0,r0,MSR_EE mtmsrd r0,1 /* rotate 24 bits SCOM address 8 bits left and mask out its low 8 bits * (including parity). On current CPUs they must be 0'd. */ rlwinm r3,r3,8,0,15 sync mtspr SPRN_SCOMD,r4 /* write data */ isync mtspr SPRN_SCOMC,r3 /* write command */ isync mfspr 3,SPRN_SCOMC isync /* restore interrupts */ mtmsrd r5,1 blr #endif // CONFIG_CPU_FREQ_PMAC64 /* kexec_wait(phys_cpu) * * wait for the flag to change, indicating this kernel is going away but * the slave code for the next one is at addresses 0 to 100. * * This is used by all slaves, even those that did not find a matching * paca in the secondary startup code. * * Physical (hardware) cpu id should be in r3. */ _GLOBAL(kexec_wait) bcl 20,31,$+4 1: mflr r5 addi r5,r5,kexec_flag-1b 99: HMT_LOW #ifdef CONFIG_KEXEC_CORE /* use no memory without kexec */ lwz r4,0(r5) cmpwi 0,r4,0 beq 99b #ifdef CONFIG_PPC_BOOK3S_64 li r10,0x60 mfmsr r11 clrrdi r11,r11,1 /* Clear MSR_LE */ mtsrr0 r10 mtsrr1 r11 rfid #else /* Create TLB entry in book3e_secondary_core_init */ li r4,0 ba 0x60 #endif #endif /* this can be in text because we won't change it until we are * running in real anyways */ kexec_flag: .long 0 #ifdef CONFIG_KEXEC_CORE #ifdef CONFIG_PPC_BOOK3E_64 /* * BOOK3E has no real MMU mode, so we have to setup the initial TLB * for a core to identity map v:0 to p:0. This current implementation * assumes that 1G is enough for kexec. */ kexec_create_tlb: /* * Invalidate all non-IPROT TLB entries to avoid any TLB conflict. * IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict. */ PPC_TLBILX_ALL(0,R0) sync isync mfspr r10,SPRN_TLB1CFG andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */ subi r10,r10,1 /* Last entry: no conflict with kernel text */ lis r9,MAS0_TLBSEL(1)@h rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */ /* Set up a temp identity mapping v:0 to p:0 and return to it. */ mtspr SPRN_MAS0,r9 lis r9,(MAS1_VALID|MAS1_IPROT)@h ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l mtspr SPRN_MAS1,r9 LOAD_REG_IMMEDIATE(r9, 0x0 | MAS2_M_IF_NEEDED) mtspr SPRN_MAS2,r9 LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX) mtspr SPRN_MAS3,r9 li r9,0 mtspr SPRN_MAS7,r9 tlbwe isync blr #endif /* kexec_smp_wait(void) * * call with interrupts off * note: this is a terminal routine, it does not save lr * * get phys id from paca * switch to real mode * mark the paca as no longer used * join other cpus in kexec_wait(phys_id) */ _GLOBAL(kexec_smp_wait) lhz r3,PACAHWCPUID(r13) bl real_mode li r4,KEXEC_STATE_REAL_MODE stb r4,PACAKEXECSTATE(r13) b kexec_wait /* * switch to real mode (turn mmu off) * we use the early kernel trick that the hardware ignores bits * 0 and 1 (big endian) of the effective address in real mode * * don't overwrite r3 here, it is live for kexec_wait above. */ SYM_FUNC_START_LOCAL(real_mode) /* assume normal blr return */ #ifdef CONFIG_PPC_BOOK3E_64 /* Create an identity mapping. */ b kexec_create_tlb #else 1: li r9,MSR_RI li r10,MSR_DR|MSR_IR mflr r11 /* return address to SRR0 */ mfmsr r12 andc r9,r12,r9 andc r10,r12,r10 mtmsrd r9,1 mtspr SPRN_SRR1,r10 mtspr SPRN_SRR0,r11 rfid #endif SYM_FUNC_END(real_mode) /* * kexec_sequence(newstack, start, image, control, clear_all(), copy_with_mmu_off) * * does the grungy work with stack switching and real mode switches * also does simple calls to other code */ _GLOBAL(kexec_sequence) mflr r0 std r0,16(r1) /* switch stacks to newstack -- &kexec_stack.stack */ stdu r1,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r3) mr r1,r3 li r0,0 std r0,16(r1) /* save regs for local vars on new stack. * yes, we won't go back, but ... */ std r31,-8(r1) std r30,-16(r1) std r29,-24(r1) std r28,-32(r1) std r27,-40(r1) std r26,-48(r1) std r25,-56(r1) stdu r1,-STACK_FRAME_MIN_SIZE-64(r1) /* save args into preserved regs */ mr r31,r3 /* newstack (both) */ mr r30,r4 /* start (real) */ mr r29,r5 /* image (virt) */ mr r28,r6 /* control, unused */ mr r27,r7 /* clear_all() fn desc */ mr r26,r8 /* copy_with_mmu_off */ lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ /* disable interrupts, we are overwriting kernel data next */ #ifdef CONFIG_PPC_BOOK3E_64 wrteei 0 #else mfmsr r3 rlwinm r3,r3,0,17,15 mtmsrd r3,1 #endif /* We need to turn the MMU off unless we are in hash mode * under a hypervisor */ cmpdi r26,0 beq 1f bl real_mode 1: /* copy dest pages, flush whole dest image */ mr r3,r29 bl CFUNC(kexec_copy_flush) /* (image) */ /* turn off mmu now if not done earlier */ cmpdi r26,0 bne 1f bl real_mode /* copy 0x100 bytes starting at start to 0 */ 1: li r3,0 mr r4,r30 /* start, aka phys mem offset */ li r5,0x100 li r6,0 bl copy_and_flush /* (dest, src, copy limit, start offset) */ 1: /* assume normal blr return */ /* release other cpus to the new kernel secondary start at 0x60 */ mflr r5 li r6,1 stw r6,kexec_flag-1b(5) cmpdi r27,0 beq 1f /* clear out hardware hash page table and tlb */ #ifdef CONFIG_PPC64_ELF_ABI_V1 ld r12,0(r27) /* deref function descriptor */ #else mr r12,r27 #endif mtctr r12 bctrl /* mmu_hash_ops.hpte_clear_all(void); */ /* * kexec image calling is: * the first 0x100 bytes of the entry point are copied to 0 * * all slaves branch to slave = 0x60 (absolute) * slave(phys_cpu_id); * * master goes to start = entry point * start(phys_cpu_id, start, 0); * * * a wrapper is needed to call existing kernels, here is an approximate * description of one method: * * v2: (2.6.10) * start will be near the boot_block (maybe 0x100 bytes before it?) * it will have a 0x60, which will b to boot_block, where it will wait * and 0 will store phys into struct boot-block and load r3 from there, * copy kernel 0-0x100 and tell slaves to back down to 0x60 again * * v1: (2.6.9) * boot block will have all cpus scanning device tree to see if they * are the boot cpu ????? * other device tree differences (prop sizes, va vs pa, etc)... */ 1: mr r3,r25 # my phys cpu mr r4,r30 # start, aka phys mem offset mtlr 4 li r5,0 blr /* image->start(physid, image->start, 0); */ #endif /* CONFIG_KEXEC_CORE */