// SPDX-License-Identifier: GPL-2.0+ /* * Motorcomm 8511/8521/8531/8531S/8821 PHY driver. * * Author: Peter Geis * Author: Frank */ #include #include #include #include #include #define PHY_ID_YT8511 0x0000010a #define PHY_ID_YT8521 0x0000011a #define PHY_ID_YT8531 0x4f51e91b #define PHY_ID_YT8531S 0x4f51e91a #define PHY_ID_YT8821 0x4f51ea19 /* YT8521/YT8531S/YT8821 Register Overview * UTP Register space | FIBER Register space * ------------------------------------------------------------ * | UTP MII | FIBER MII | * | UTP MMD | | * | UTP Extended | FIBER Extended | * ------------------------------------------------------------ * | Common Extended | * ------------------------------------------------------------ */ /* 0x10 ~ 0x15 , 0x1E and 0x1F are common MII registers of yt phy */ /* Specific Function Control Register */ #define YTPHY_SPECIFIC_FUNCTION_CONTROL_REG 0x10 /* 2b00 Manual MDI configuration * 2b01 Manual MDIX configuration * 2b10 Reserved * 2b11 Enable automatic crossover for all modes *default* */ #define YTPHY_SFCR_MDI_CROSSOVER_MODE_MASK (BIT(6) | BIT(5)) #define YTPHY_SFCR_CROSSOVER_EN BIT(3) #define YTPHY_SFCR_SQE_TEST_EN BIT(2) #define YTPHY_SFCR_POLARITY_REVERSAL_EN BIT(1) #define YTPHY_SFCR_JABBER_DIS BIT(0) /* Specific Status Register */ #define YTPHY_SPECIFIC_STATUS_REG 0x11 #define YTPHY_SSR_SPEED_MASK ((0x3 << 14) | BIT(9)) #define YTPHY_SSR_SPEED_10M ((0x0 << 14)) #define YTPHY_SSR_SPEED_100M ((0x1 << 14)) #define YTPHY_SSR_SPEED_1000M ((0x2 << 14)) #define YTPHY_SSR_SPEED_10G ((0x3 << 14)) #define YTPHY_SSR_SPEED_2500M ((0x0 << 14) | BIT(9)) #define YTPHY_SSR_DUPLEX_OFFSET 13 #define YTPHY_SSR_DUPLEX BIT(13) #define YTPHY_SSR_PAGE_RECEIVED BIT(12) #define YTPHY_SSR_SPEED_DUPLEX_RESOLVED BIT(11) #define YTPHY_SSR_LINK BIT(10) #define YTPHY_SSR_MDIX_CROSSOVER BIT(6) #define YTPHY_SSR_DOWNGRADE BIT(5) #define YTPHY_SSR_TRANSMIT_PAUSE BIT(3) #define YTPHY_SSR_RECEIVE_PAUSE BIT(2) #define YTPHY_SSR_POLARITY BIT(1) #define YTPHY_SSR_JABBER BIT(0) /* Interrupt enable Register */ #define YTPHY_INTERRUPT_ENABLE_REG 0x12 #define YTPHY_IER_WOL BIT(6) /* Interrupt Status Register */ #define YTPHY_INTERRUPT_STATUS_REG 0x13 #define YTPHY_ISR_AUTONEG_ERR BIT(15) #define YTPHY_ISR_SPEED_CHANGED BIT(14) #define YTPHY_ISR_DUPLEX_CHANGED BIT(13) #define YTPHY_ISR_PAGE_RECEIVED BIT(12) #define YTPHY_ISR_LINK_FAILED BIT(11) #define YTPHY_ISR_LINK_SUCCESSED BIT(10) #define YTPHY_ISR_WOL BIT(6) #define YTPHY_ISR_WIRESPEED_DOWNGRADE BIT(5) #define YTPHY_ISR_SERDES_LINK_FAILED BIT(3) #define YTPHY_ISR_SERDES_LINK_SUCCESSED BIT(2) #define YTPHY_ISR_POLARITY_CHANGED BIT(1) #define YTPHY_ISR_JABBER_HAPPENED BIT(0) /* Speed Auto Downgrade Control Register */ #define YTPHY_SPEED_AUTO_DOWNGRADE_CONTROL_REG 0x14 #define YTPHY_SADCR_SPEED_DOWNGRADE_EN BIT(5) /* If these bits are set to 3, the PHY attempts five times ( 3(set value) + * additional 2) before downgrading, default 0x3 */ #define YTPHY_SADCR_SPEED_RETRY_LIMIT (0x3 << 2) /* Rx Error Counter Register */ #define YTPHY_RX_ERROR_COUNTER_REG 0x15 /* Extended Register's Address Offset Register */ #define YTPHY_PAGE_SELECT 0x1E /* Extended Register's Data Register */ #define YTPHY_PAGE_DATA 0x1F /* FIBER Auto-Negotiation link partner ability */ #define YTPHY_FLPA_PAUSE (0x3 << 7) #define YTPHY_FLPA_ASYM_PAUSE (0x2 << 7) #define YT8511_PAGE_SELECT 0x1e #define YT8511_PAGE 0x1f #define YT8511_EXT_CLK_GATE 0x0c #define YT8511_EXT_DELAY_DRIVE 0x0d #define YT8511_EXT_SLEEP_CTRL 0x27 /* 2b00 25m from pll * 2b01 25m from xtl *default* * 2b10 62.m from pll * 2b11 125m from pll */ #define YT8511_CLK_125M (BIT(2) | BIT(1)) #define YT8511_PLLON_SLP BIT(14) /* RX Delay enabled = 1.8ns 1000T, 8ns 10/100T */ #define YT8511_DELAY_RX BIT(0) /* TX Gig-E Delay is bits 7:4, default 0x5 * TX Fast-E Delay is bits 15:12, default 0xf * Delay = 150ps * N - 250ps * On = 2000ps, off = 50ps */ #define YT8511_DELAY_GE_TX_EN (0xf << 4) #define YT8511_DELAY_GE_TX_DIS (0x2 << 4) #define YT8511_DELAY_FE_TX_EN (0xf << 12) #define YT8511_DELAY_FE_TX_DIS (0x2 << 12) /* Extended register is different from MMD Register and MII Register. * We can use ytphy_read_ext/ytphy_write_ext/ytphy_modify_ext function to * operate extended register. * Extended Register start */ /* Phy gmii clock gating Register */ #define YT8521_CLOCK_GATING_REG 0xC #define YT8521_CGR_RX_CLK_EN BIT(12) #define YT8521_EXTREG_SLEEP_CONTROL1_REG 0x27 #define YT8521_ESC1R_SLEEP_SW BIT(15) #define YT8521_ESC1R_PLLON_SLP BIT(14) /* Phy fiber Link timer cfg2 Register */ #define YT8521_LINK_TIMER_CFG2_REG 0xA5 #define YT8521_LTCR_EN_AUTOSEN BIT(15) /* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers * of yt8521 phy. There is no need to switch reg space when operating these * registers. */ #define YT8521_REG_SPACE_SELECT_REG 0xA000 #define YT8521_RSSR_SPACE_MASK BIT(1) #define YT8521_RSSR_FIBER_SPACE (0x1 << 1) #define YT8521_RSSR_UTP_SPACE (0x0 << 1) #define YT8521_RSSR_TO_BE_ARBITRATED (0xFF) #define YT8521_CHIP_CONFIG_REG 0xA001 #define YT8521_CCR_SW_RST BIT(15) #define YT8531_RGMII_LDO_VOL_MASK GENMASK(5, 4) #define YT8531_LDO_VOL_3V3 0x0 #define YT8531_LDO_VOL_1V8 0x2 /* 1b0 disable 1.9ns rxc clock delay *default* * 1b1 enable 1.9ns rxc clock delay */ #define YT8521_CCR_RXC_DLY_EN BIT(8) #define YT8521_CCR_RXC_DLY_1_900_NS 1900 #define YT8521_CCR_MODE_SEL_MASK (BIT(2) | BIT(1) | BIT(0)) #define YT8521_CCR_MODE_UTP_TO_RGMII 0 #define YT8521_CCR_MODE_FIBER_TO_RGMII 1 #define YT8521_CCR_MODE_UTP_FIBER_TO_RGMII 2 #define YT8521_CCR_MODE_UTP_TO_SGMII 3 #define YT8521_CCR_MODE_SGPHY_TO_RGMAC 4 #define YT8521_CCR_MODE_SGMAC_TO_RGPHY 5 #define YT8521_CCR_MODE_UTP_TO_FIBER_AUTO 6 #define YT8521_CCR_MODE_UTP_TO_FIBER_FORCE 7 /* 3 phy polling modes,poll mode combines utp and fiber mode*/ #define YT8521_MODE_FIBER 0x1 #define YT8521_MODE_UTP 0x2 #define YT8521_MODE_POLL 0x3 #define YT8521_RGMII_CONFIG1_REG 0xA003 /* 1b0 use original tx_clk_rgmii *default* * 1b1 use inverted tx_clk_rgmii. */ #define YT8521_RC1R_TX_CLK_SEL_INVERTED BIT(14) #define YT8521_RC1R_RX_DELAY_MASK GENMASK(13, 10) #define YT8521_RC1R_FE_TX_DELAY_MASK GENMASK(7, 4) #define YT8521_RC1R_GE_TX_DELAY_MASK GENMASK(3, 0) #define YT8521_RC1R_RGMII_0_000_NS 0 #define YT8521_RC1R_RGMII_0_150_NS 1 #define YT8521_RC1R_RGMII_0_300_NS 2 #define YT8521_RC1R_RGMII_0_450_NS 3 #define YT8521_RC1R_RGMII_0_600_NS 4 #define YT8521_RC1R_RGMII_0_750_NS 5 #define YT8521_RC1R_RGMII_0_900_NS 6 #define YT8521_RC1R_RGMII_1_050_NS 7 #define YT8521_RC1R_RGMII_1_200_NS 8 #define YT8521_RC1R_RGMII_1_350_NS 9 #define YT8521_RC1R_RGMII_1_500_NS 10 #define YT8521_RC1R_RGMII_1_650_NS 11 #define YT8521_RC1R_RGMII_1_800_NS 12 #define YT8521_RC1R_RGMII_1_950_NS 13 #define YT8521_RC1R_RGMII_2_100_NS 14 #define YT8521_RC1R_RGMII_2_250_NS 15 #define YTPHY_MISC_CONFIG_REG 0xA006 #define YTPHY_MCR_FIBER_SPEED_MASK BIT(0) #define YTPHY_MCR_FIBER_1000BX (0x1 << 0) #define YTPHY_MCR_FIBER_100FX (0x0 << 0) /* WOL MAC ADDR: MACADDR2(highest), MACADDR1(middle), MACADDR0(lowest) */ #define YTPHY_WOL_MACADDR2_REG 0xA007 #define YTPHY_WOL_MACADDR1_REG 0xA008 #define YTPHY_WOL_MACADDR0_REG 0xA009 #define YTPHY_WOL_CONFIG_REG 0xA00A #define YTPHY_WCR_INTR_SEL BIT(6) #define YTPHY_WCR_ENABLE BIT(3) /* 2b00 84ms * 2b01 168ms *default* * 2b10 336ms * 2b11 672ms */ #define YTPHY_WCR_PULSE_WIDTH_MASK (BIT(2) | BIT(1)) #define YTPHY_WCR_PULSE_WIDTH_672MS (BIT(2) | BIT(1)) /* 1b0 Interrupt and WOL events is level triggered and active LOW *default* * 1b1 Interrupt and WOL events is pulse triggered and active LOW */ #define YTPHY_WCR_TYPE_PULSE BIT(0) #define YTPHY_PAD_DRIVE_STRENGTH_REG 0xA010 #define YT8531_RGMII_RXC_DS_MASK GENMASK(15, 13) #define YT8531_RGMII_RXD_DS_HI_MASK BIT(12) /* Bit 2 of rxd_ds */ #define YT8531_RGMII_RXD_DS_LOW_MASK GENMASK(5, 4) /* Bit 1/0 of rxd_ds */ #define YT8531_RGMII_RX_DS_DEFAULT 0x3 #define YTPHY_SYNCE_CFG_REG 0xA012 #define YT8521_SCR_SYNCE_ENABLE BIT(5) /* 1b0 output 25m clock * 1b1 output 125m clock *default* */ #define YT8521_SCR_CLK_FRE_SEL_125M BIT(3) #define YT8521_SCR_CLK_SRC_MASK GENMASK(2, 1) #define YT8521_SCR_CLK_SRC_PLL_125M 0 #define YT8521_SCR_CLK_SRC_UTP_RX 1 #define YT8521_SCR_CLK_SRC_SDS_RX 2 #define YT8521_SCR_CLK_SRC_REF_25M 3 #define YT8531_SCR_SYNCE_ENABLE BIT(6) /* 1b0 output 25m clock *default* * 1b1 output 125m clock */ #define YT8531_SCR_CLK_FRE_SEL_125M BIT(4) #define YT8531_SCR_CLK_SRC_MASK GENMASK(3, 1) #define YT8531_SCR_CLK_SRC_PLL_125M 0 #define YT8531_SCR_CLK_SRC_UTP_RX 1 #define YT8531_SCR_CLK_SRC_SDS_RX 2 #define YT8531_SCR_CLK_SRC_CLOCK_FROM_DIGITAL 3 #define YT8531_SCR_CLK_SRC_REF_25M 4 #define YT8531_SCR_CLK_SRC_SSC_25M 5 #define YT8821_SDS_EXT_CSR_CTRL_REG 0x23 #define YT8821_SDS_EXT_CSR_VCO_LDO_EN BIT(15) #define YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN BIT(8) #define YT8821_UTP_EXT_PI_CTRL_REG 0x56 #define YT8821_UTP_EXT_PI_RST_N_FIFO BIT(5) #define YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE BIT(4) #define YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE BIT(3) #define YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE BIT(2) #define YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE BIT(1) #define YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE BIT(0) #define YT8821_UTP_EXT_VCT_CFG6_CTRL_REG 0x97 #define YT8821_UTP_EXT_FECHO_AMP_TH_HUGE GENMASK(15, 8) #define YT8821_UTP_EXT_ECHO_CTRL_REG 0x336 #define YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000 GENMASK(14, 8) #define YT8821_UTP_EXT_GAIN_CTRL_REG 0x340 #define YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000 GENMASK(6, 0) #define YT8821_UTP_EXT_RPDN_CTRL_REG 0x34E #define YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 BIT(15) #define YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 BIT(7) #define YT8821_UTP_EXT_RPDN_IPR_SHT_2500 GENMASK(6, 0) #define YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG 0x36A #define YT8821_UTP_EXT_TH_20DB_2500 GENMASK(15, 0) #define YT8821_UTP_EXT_TRACE_CTRL_REG 0x372 #define YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 GENMASK(14, 8) #define YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500 GENMASK(6, 0) #define YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG 0x374 #define YT8821_UTP_EXT_ALPHA_SHT_2500 GENMASK(14, 8) #define YT8821_UTP_EXT_IPR_LNG_2500 GENMASK(6, 0) #define YT8821_UTP_EXT_PLL_CTRL_REG 0x450 #define YT8821_UTP_EXT_PLL_SPARE_CFG GENMASK(7, 0) #define YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG 0x466 #define YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG GENMASK(14, 8) #define YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG GENMASK(6, 0) #define YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG 0x467 #define YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG GENMASK(14, 8) #define YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG GENMASK(6, 0) #define YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG 0x468 #define YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG GENMASK(14, 8) #define YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG GENMASK(6, 0) #define YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG 0x469 #define YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG GENMASK(14, 8) #define YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG GENMASK(6, 0) #define YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG 0x4B3 #define YT8821_UTP_EXT_MU_COARSE_FR_F_FFE GENMASK(14, 12) #define YT8821_UTP_EXT_MU_COARSE_FR_F_FBE GENMASK(10, 8) #define YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG 0x4B5 #define YT8821_UTP_EXT_MU_FINE_FR_F_FFE GENMASK(14, 12) #define YT8821_UTP_EXT_MU_FINE_FR_F_FBE GENMASK(10, 8) #define YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG 0x4D2 #define YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER GENMASK(7, 4) #define YT8821_UTP_EXT_VGA_LPF1_CAP_2500 GENMASK(3, 0) #define YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG 0x4D3 #define YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER GENMASK(7, 4) #define YT8821_UTP_EXT_VGA_LPF2_CAP_2500 GENMASK(3, 0) #define YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG 0x660 #define YT8821_UTP_EXT_NFR_TX_ABILITY BIT(3) /* Extended Register end */ #define YTPHY_DTS_OUTPUT_CLK_DIS 0 #define YTPHY_DTS_OUTPUT_CLK_25M 25000000 #define YTPHY_DTS_OUTPUT_CLK_125M 125000000 #define YT8821_CHIP_MODE_AUTO_BX2500_SGMII 0 #define YT8821_CHIP_MODE_FORCE_BX2500 1 struct yt8521_priv { /* combo_advertising is used for case of YT8521 in combo mode, * this means that yt8521 may work in utp or fiber mode which depends * on which media is connected (YT8521_RSSR_TO_BE_ARBITRATED). */ __ETHTOOL_DECLARE_LINK_MODE_MASK(combo_advertising); /* YT8521_MODE_FIBER / YT8521_MODE_UTP / YT8521_MODE_POLL*/ u8 polling_mode; u8 strap_mode; /* 8 working modes */ /* current reg page of yt8521 phy: * YT8521_RSSR_UTP_SPACE * YT8521_RSSR_FIBER_SPACE * YT8521_RSSR_TO_BE_ARBITRATED */ u8 reg_page; }; /** * ytphy_read_ext() - read a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to read * * NOTE:The caller must have taken the MDIO bus lock. * * returns the value of regnum reg or negative error code */ static int ytphy_read_ext(struct phy_device *phydev, u16 regnum) { int ret; ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); if (ret < 0) return ret; return __phy_read(phydev, YTPHY_PAGE_DATA); } /** * ytphy_read_ext_with_lock() - read a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to read * * returns the value of regnum reg or negative error code */ static int ytphy_read_ext_with_lock(struct phy_device *phydev, u16 regnum) { int ret; phy_lock_mdio_bus(phydev); ret = ytphy_read_ext(phydev, regnum); phy_unlock_mdio_bus(phydev); return ret; } /** * ytphy_write_ext() - write a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to write * @val: value to write to @regnum * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 or negative error code */ static int ytphy_write_ext(struct phy_device *phydev, u16 regnum, u16 val) { int ret; ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); if (ret < 0) return ret; return __phy_write(phydev, YTPHY_PAGE_DATA, val); } /** * ytphy_write_ext_with_lock() - write a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to write * @val: value to write to @regnum * * returns 0 or negative error code */ static int ytphy_write_ext_with_lock(struct phy_device *phydev, u16 regnum, u16 val) { int ret; phy_lock_mdio_bus(phydev); ret = ytphy_write_ext(phydev, regnum, val); phy_unlock_mdio_bus(phydev); return ret; } /** * ytphy_modify_ext() - bits modify a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to write * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * NOTE: Convenience function which allows a PHY's extended register to be * modified as new register value = (old register value & ~mask) | set. * The caller must have taken the MDIO bus lock. * * returns 0 or negative error code */ static int ytphy_modify_ext(struct phy_device *phydev, u16 regnum, u16 mask, u16 set) { int ret; ret = __phy_write(phydev, YTPHY_PAGE_SELECT, regnum); if (ret < 0) return ret; return __phy_modify(phydev, YTPHY_PAGE_DATA, mask, set); } /** * ytphy_modify_ext_with_lock() - bits modify a PHY's extended register * @phydev: a pointer to a &struct phy_device * @regnum: register number to write * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * NOTE: Convenience function which allows a PHY's extended register to be * modified as new register value = (old register value & ~mask) | set. * * returns 0 or negative error code */ static int ytphy_modify_ext_with_lock(struct phy_device *phydev, u16 regnum, u16 mask, u16 set) { int ret; phy_lock_mdio_bus(phydev); ret = ytphy_modify_ext(phydev, regnum, mask, set); phy_unlock_mdio_bus(phydev); return ret; } /** * ytphy_get_wol() - report whether wake-on-lan is enabled * @phydev: a pointer to a &struct phy_device * @wol: a pointer to a &struct ethtool_wolinfo * * NOTE: YTPHY_WOL_CONFIG_REG is common ext reg. */ static void ytphy_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { int wol_config; wol->supported = WAKE_MAGIC; wol->wolopts = 0; wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); if (wol_config < 0) return; if (wol_config & YTPHY_WCR_ENABLE) wol->wolopts |= WAKE_MAGIC; } /** * ytphy_set_wol() - turn wake-on-lan on or off * @phydev: a pointer to a &struct phy_device * @wol: a pointer to a &struct ethtool_wolinfo * * NOTE: YTPHY_WOL_CONFIG_REG, YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG * and YTPHY_WOL_MACADDR0_REG are common ext reg. The * YTPHY_INTERRUPT_ENABLE_REG of UTP is special, fiber also use this register. * * returns 0 or negative errno code */ static int ytphy_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { struct net_device *p_attached_dev; const u16 mac_addr_reg[] = { YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG, YTPHY_WOL_MACADDR0_REG, }; const u8 *mac_addr; int old_page; int ret = 0; u16 mask; u16 val; u8 i; if (wol->wolopts & WAKE_MAGIC) { p_attached_dev = phydev->attached_dev; if (!p_attached_dev) return -ENODEV; mac_addr = (const u8 *)p_attached_dev->dev_addr; if (!is_valid_ether_addr(mac_addr)) return -EINVAL; /* lock mdio bus then switch to utp reg space */ old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) goto err_restore_page; /* Store the device address for the magic packet */ for (i = 0; i < 3; i++) { ret = ytphy_write_ext(phydev, mac_addr_reg[i], ((mac_addr[i * 2] << 8)) | (mac_addr[i * 2 + 1])); if (ret < 0) goto err_restore_page; } /* Enable WOL feature */ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, val); if (ret < 0) goto err_restore_page; /* Enable WOL interrupt */ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, YTPHY_IER_WOL); if (ret < 0) goto err_restore_page; } else { old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) goto err_restore_page; /* Disable WOL feature */ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ret = ytphy_modify_ext(phydev, YTPHY_WOL_CONFIG_REG, mask, 0); /* Disable WOL interrupt */ ret = __phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, YTPHY_IER_WOL, 0); if (ret < 0) goto err_restore_page; } err_restore_page: return phy_restore_page(phydev, old_page, ret); } static int yt8531_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol) { const u16 mac_addr_reg[] = { YTPHY_WOL_MACADDR2_REG, YTPHY_WOL_MACADDR1_REG, YTPHY_WOL_MACADDR0_REG, }; const u8 *mac_addr; u16 mask, val; int ret; u8 i; if (wol->wolopts & WAKE_MAGIC) { mac_addr = phydev->attached_dev->dev_addr; /* Store the device address for the magic packet */ for (i = 0; i < 3; i++) { ret = ytphy_write_ext_with_lock(phydev, mac_addr_reg[i], ((mac_addr[i * 2] << 8)) | (mac_addr[i * 2 + 1])); if (ret < 0) return ret; } /* Enable WOL feature */ mask = YTPHY_WCR_PULSE_WIDTH_MASK | YTPHY_WCR_INTR_SEL; val = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; val |= YTPHY_WCR_TYPE_PULSE | YTPHY_WCR_PULSE_WIDTH_672MS; ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, mask, val); if (ret < 0) return ret; /* Enable WOL interrupt */ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, 0, YTPHY_IER_WOL); if (ret < 0) return ret; } else { /* Disable WOL feature */ mask = YTPHY_WCR_ENABLE | YTPHY_WCR_INTR_SEL; ret = ytphy_modify_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG, mask, 0); /* Disable WOL interrupt */ ret = phy_modify(phydev, YTPHY_INTERRUPT_ENABLE_REG, YTPHY_IER_WOL, 0); if (ret < 0) return ret; } return 0; } static int yt8511_read_page(struct phy_device *phydev) { return __phy_read(phydev, YT8511_PAGE_SELECT); }; static int yt8511_write_page(struct phy_device *phydev, int page) { return __phy_write(phydev, YT8511_PAGE_SELECT, page); }; static int yt8511_config_init(struct phy_device *phydev) { int oldpage, ret = 0; unsigned int ge, fe; oldpage = phy_select_page(phydev, YT8511_EXT_CLK_GATE); if (oldpage < 0) goto err_restore_page; /* set rgmii delay mode */ switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: ge = YT8511_DELAY_GE_TX_DIS; fe = YT8511_DELAY_FE_TX_DIS; break; case PHY_INTERFACE_MODE_RGMII_RXID: ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_DIS; fe = YT8511_DELAY_FE_TX_DIS; break; case PHY_INTERFACE_MODE_RGMII_TXID: ge = YT8511_DELAY_GE_TX_EN; fe = YT8511_DELAY_FE_TX_EN; break; case PHY_INTERFACE_MODE_RGMII_ID: ge = YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN; fe = YT8511_DELAY_FE_TX_EN; break; default: /* do not support other modes */ ret = -EOPNOTSUPP; goto err_restore_page; } ret = __phy_modify(phydev, YT8511_PAGE, (YT8511_DELAY_RX | YT8511_DELAY_GE_TX_EN), ge); if (ret < 0) goto err_restore_page; /* set clock mode to 125mhz */ ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_CLK_125M); if (ret < 0) goto err_restore_page; /* fast ethernet delay is in a separate page */ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_DELAY_DRIVE); if (ret < 0) goto err_restore_page; ret = __phy_modify(phydev, YT8511_PAGE, YT8511_DELAY_FE_TX_EN, fe); if (ret < 0) goto err_restore_page; /* leave pll enabled in sleep */ ret = __phy_write(phydev, YT8511_PAGE_SELECT, YT8511_EXT_SLEEP_CTRL); if (ret < 0) goto err_restore_page; ret = __phy_modify(phydev, YT8511_PAGE, 0, YT8511_PLLON_SLP); if (ret < 0) goto err_restore_page; err_restore_page: return phy_restore_page(phydev, oldpage, ret); } /** * yt8521_read_page() - read reg page * @phydev: a pointer to a &struct phy_device * * returns current reg space of yt8521 (YT8521_RSSR_FIBER_SPACE/ * YT8521_RSSR_UTP_SPACE) or negative errno code */ static int yt8521_read_page(struct phy_device *phydev) { int old_page; old_page = ytphy_read_ext(phydev, YT8521_REG_SPACE_SELECT_REG); if (old_page < 0) return old_page; if ((old_page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) return YT8521_RSSR_FIBER_SPACE; return YT8521_RSSR_UTP_SPACE; }; /** * yt8521_write_page() - write reg page * @phydev: a pointer to a &struct phy_device * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to write. * * returns 0 or negative errno code */ static int yt8521_write_page(struct phy_device *phydev, int page) { int mask = YT8521_RSSR_SPACE_MASK; int set; if ((page & YT8521_RSSR_SPACE_MASK) == YT8521_RSSR_FIBER_SPACE) set = YT8521_RSSR_FIBER_SPACE; else set = YT8521_RSSR_UTP_SPACE; return ytphy_modify_ext(phydev, YT8521_REG_SPACE_SELECT_REG, mask, set); }; /** * struct ytphy_cfg_reg_map - map a config value to a register value * @cfg: value in device configuration * @reg: value in the register */ struct ytphy_cfg_reg_map { u32 cfg; u32 reg; }; static const struct ytphy_cfg_reg_map ytphy_rgmii_delays[] = { /* for tx delay / rx delay with YT8521_CCR_RXC_DLY_EN is not set. */ { 0, YT8521_RC1R_RGMII_0_000_NS }, { 150, YT8521_RC1R_RGMII_0_150_NS }, { 300, YT8521_RC1R_RGMII_0_300_NS }, { 450, YT8521_RC1R_RGMII_0_450_NS }, { 600, YT8521_RC1R_RGMII_0_600_NS }, { 750, YT8521_RC1R_RGMII_0_750_NS }, { 900, YT8521_RC1R_RGMII_0_900_NS }, { 1050, YT8521_RC1R_RGMII_1_050_NS }, { 1200, YT8521_RC1R_RGMII_1_200_NS }, { 1350, YT8521_RC1R_RGMII_1_350_NS }, { 1500, YT8521_RC1R_RGMII_1_500_NS }, { 1650, YT8521_RC1R_RGMII_1_650_NS }, { 1800, YT8521_RC1R_RGMII_1_800_NS }, { 1950, YT8521_RC1R_RGMII_1_950_NS }, /* default tx/rx delay */ { 2100, YT8521_RC1R_RGMII_2_100_NS }, { 2250, YT8521_RC1R_RGMII_2_250_NS }, /* only for rx delay with YT8521_CCR_RXC_DLY_EN is set. */ { 0 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_000_NS }, { 150 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_150_NS }, { 300 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_300_NS }, { 450 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_450_NS }, { 600 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_600_NS }, { 750 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_750_NS }, { 900 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_0_900_NS }, { 1050 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_050_NS }, { 1200 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_200_NS }, { 1350 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_350_NS }, { 1500 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_500_NS }, { 1650 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_650_NS }, { 1800 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_800_NS }, { 1950 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_1_950_NS }, { 2100 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_100_NS }, { 2250 + YT8521_CCR_RXC_DLY_1_900_NS, YT8521_RC1R_RGMII_2_250_NS } }; static u32 ytphy_get_delay_reg_value(struct phy_device *phydev, const char *prop_name, const struct ytphy_cfg_reg_map *tbl, int tb_size, u16 *rxc_dly_en, u32 dflt) { struct device_node *node = phydev->mdio.dev.of_node; int tb_size_half = tb_size / 2; u32 val; int i; if (of_property_read_u32(node, prop_name, &val)) goto err_dts_val; /* when rxc_dly_en is NULL, it is get the delay for tx, only half of * tb_size is valid. */ if (!rxc_dly_en) tb_size = tb_size_half; for (i = 0; i < tb_size; i++) { if (tbl[i].cfg == val) { if (rxc_dly_en && i < tb_size_half) *rxc_dly_en = 0; return tbl[i].reg; } } phydev_warn(phydev, "Unsupported value %d for %s using default (%u)\n", val, prop_name, dflt); err_dts_val: /* when rxc_dly_en is not NULL, it is get the delay for rx. * The rx default in dts and ytphy_rgmii_clk_delay_config is 1950 ps, * so YT8521_CCR_RXC_DLY_EN should not be set. */ if (rxc_dly_en) *rxc_dly_en = 0; return dflt; } static int ytphy_rgmii_clk_delay_config(struct phy_device *phydev) { int tb_size = ARRAY_SIZE(ytphy_rgmii_delays); u16 rxc_dly_en = YT8521_CCR_RXC_DLY_EN; u32 rx_reg, tx_reg; u16 mask, val = 0; int ret; rx_reg = ytphy_get_delay_reg_value(phydev, "rx-internal-delay-ps", ytphy_rgmii_delays, tb_size, &rxc_dly_en, YT8521_RC1R_RGMII_1_950_NS); tx_reg = ytphy_get_delay_reg_value(phydev, "tx-internal-delay-ps", ytphy_rgmii_delays, tb_size, NULL, YT8521_RC1R_RGMII_1_950_NS); switch (phydev->interface) { case PHY_INTERFACE_MODE_RGMII: rxc_dly_en = 0; break; case PHY_INTERFACE_MODE_RGMII_RXID: val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg); break; case PHY_INTERFACE_MODE_RGMII_TXID: rxc_dly_en = 0; val |= FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); break; case PHY_INTERFACE_MODE_RGMII_ID: val |= FIELD_PREP(YT8521_RC1R_RX_DELAY_MASK, rx_reg) | FIELD_PREP(YT8521_RC1R_GE_TX_DELAY_MASK, tx_reg); break; default: /* do not support other modes */ return -EOPNOTSUPP; } ret = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, YT8521_CCR_RXC_DLY_EN, rxc_dly_en); if (ret < 0) return ret; /* Generally, it is not necessary to adjust YT8521_RC1R_FE_TX_DELAY */ mask = YT8521_RC1R_RX_DELAY_MASK | YT8521_RC1R_GE_TX_DELAY_MASK; return ytphy_modify_ext(phydev, YT8521_RGMII_CONFIG1_REG, mask, val); } static int ytphy_rgmii_clk_delay_config_with_lock(struct phy_device *phydev) { int ret; phy_lock_mdio_bus(phydev); ret = ytphy_rgmii_clk_delay_config(phydev); phy_unlock_mdio_bus(phydev); return ret; } /** * struct ytphy_ldo_vol_map - map a current value to a register value * @vol: ldo voltage * @ds: value in the register * @cur: value in device configuration */ struct ytphy_ldo_vol_map { u32 vol; u32 ds; u32 cur; }; static const struct ytphy_ldo_vol_map yt8531_ldo_vol[] = { {.vol = YT8531_LDO_VOL_1V8, .ds = 0, .cur = 1200}, {.vol = YT8531_LDO_VOL_1V8, .ds = 1, .cur = 2100}, {.vol = YT8531_LDO_VOL_1V8, .ds = 2, .cur = 2700}, {.vol = YT8531_LDO_VOL_1V8, .ds = 3, .cur = 2910}, {.vol = YT8531_LDO_VOL_1V8, .ds = 4, .cur = 3110}, {.vol = YT8531_LDO_VOL_1V8, .ds = 5, .cur = 3600}, {.vol = YT8531_LDO_VOL_1V8, .ds = 6, .cur = 3970}, {.vol = YT8531_LDO_VOL_1V8, .ds = 7, .cur = 4350}, {.vol = YT8531_LDO_VOL_3V3, .ds = 0, .cur = 3070}, {.vol = YT8531_LDO_VOL_3V3, .ds = 1, .cur = 4080}, {.vol = YT8531_LDO_VOL_3V3, .ds = 2, .cur = 4370}, {.vol = YT8531_LDO_VOL_3V3, .ds = 3, .cur = 4680}, {.vol = YT8531_LDO_VOL_3V3, .ds = 4, .cur = 5020}, {.vol = YT8531_LDO_VOL_3V3, .ds = 5, .cur = 5450}, {.vol = YT8531_LDO_VOL_3V3, .ds = 6, .cur = 5740}, {.vol = YT8531_LDO_VOL_3V3, .ds = 7, .cur = 6140}, }; static u32 yt8531_get_ldo_vol(struct phy_device *phydev) { u32 val; val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); val = FIELD_GET(YT8531_RGMII_LDO_VOL_MASK, val); return val <= YT8531_LDO_VOL_1V8 ? val : YT8531_LDO_VOL_1V8; } static int yt8531_get_ds_map(struct phy_device *phydev, u32 cur) { u32 vol; int i; vol = yt8531_get_ldo_vol(phydev); for (i = 0; i < ARRAY_SIZE(yt8531_ldo_vol); i++) { if (yt8531_ldo_vol[i].vol == vol && yt8531_ldo_vol[i].cur == cur) return yt8531_ldo_vol[i].ds; } return -EINVAL; } static int yt8531_set_ds(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; u32 ds_field_low, ds_field_hi, val; int ret, ds; /* set rgmii rx clk driver strength */ if (!of_property_read_u32(node, "motorcomm,rx-clk-drv-microamp", &val)) { ds = yt8531_get_ds_map(phydev, val); if (ds < 0) return dev_err_probe(&phydev->mdio.dev, ds, "No matching current value was found.\n"); } else { ds = YT8531_RGMII_RX_DS_DEFAULT; } ret = ytphy_modify_ext_with_lock(phydev, YTPHY_PAD_DRIVE_STRENGTH_REG, YT8531_RGMII_RXC_DS_MASK, FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds)); if (ret < 0) return ret; /* set rgmii rx data driver strength */ if (!of_property_read_u32(node, "motorcomm,rx-data-drv-microamp", &val)) { ds = yt8531_get_ds_map(phydev, val); if (ds < 0) return dev_err_probe(&phydev->mdio.dev, ds, "No matching current value was found.\n"); } else { ds = YT8531_RGMII_RX_DS_DEFAULT; } ds_field_hi = FIELD_GET(BIT(2), ds); ds_field_hi = FIELD_PREP(YT8531_RGMII_RXD_DS_HI_MASK, ds_field_hi); ds_field_low = FIELD_GET(GENMASK(1, 0), ds); ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low); ret = ytphy_modify_ext_with_lock(phydev, YTPHY_PAD_DRIVE_STRENGTH_REG, YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK, ds_field_low | ds_field_hi); if (ret < 0) return ret; return 0; } /** * yt8521_probe() - read chip config then set suitable polling_mode * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_probe(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; struct device *dev = &phydev->mdio.dev; struct yt8521_priv *priv; int chip_config; u16 mask, val; u32 freq; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; phydev->priv = priv; chip_config = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); if (chip_config < 0) return chip_config; priv->strap_mode = chip_config & YT8521_CCR_MODE_SEL_MASK; switch (priv->strap_mode) { case YT8521_CCR_MODE_FIBER_TO_RGMII: case YT8521_CCR_MODE_SGPHY_TO_RGMAC: case YT8521_CCR_MODE_SGMAC_TO_RGPHY: priv->polling_mode = YT8521_MODE_FIBER; priv->reg_page = YT8521_RSSR_FIBER_SPACE; phydev->port = PORT_FIBRE; break; case YT8521_CCR_MODE_UTP_FIBER_TO_RGMII: case YT8521_CCR_MODE_UTP_TO_FIBER_AUTO: case YT8521_CCR_MODE_UTP_TO_FIBER_FORCE: priv->polling_mode = YT8521_MODE_POLL; priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; phydev->port = PORT_NONE; break; case YT8521_CCR_MODE_UTP_TO_SGMII: case YT8521_CCR_MODE_UTP_TO_RGMII: priv->polling_mode = YT8521_MODE_UTP; priv->reg_page = YT8521_RSSR_UTP_SPACE; phydev->port = PORT_TP; break; } /* set default reg space */ if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ret = ytphy_write_ext_with_lock(phydev, YT8521_REG_SPACE_SELECT_REG, priv->reg_page); if (ret < 0) return ret; } if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) freq = YTPHY_DTS_OUTPUT_CLK_DIS; if (phydev->drv->phy_id == PHY_ID_YT8521) { switch (freq) { case YTPHY_DTS_OUTPUT_CLK_DIS: mask = YT8521_SCR_SYNCE_ENABLE; val = 0; break; case YTPHY_DTS_OUTPUT_CLK_25M: mask = YT8521_SCR_SYNCE_ENABLE | YT8521_SCR_CLK_SRC_MASK | YT8521_SCR_CLK_FRE_SEL_125M; val = YT8521_SCR_SYNCE_ENABLE | FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, YT8521_SCR_CLK_SRC_REF_25M); break; case YTPHY_DTS_OUTPUT_CLK_125M: mask = YT8521_SCR_SYNCE_ENABLE | YT8521_SCR_CLK_SRC_MASK | YT8521_SCR_CLK_FRE_SEL_125M; val = YT8521_SCR_SYNCE_ENABLE | YT8521_SCR_CLK_FRE_SEL_125M | FIELD_PREP(YT8521_SCR_CLK_SRC_MASK, YT8521_SCR_CLK_SRC_PLL_125M); break; default: phydev_warn(phydev, "Freq err:%u\n", freq); return -EINVAL; } } else if (phydev->drv->phy_id == PHY_ID_YT8531S) { switch (freq) { case YTPHY_DTS_OUTPUT_CLK_DIS: mask = YT8531_SCR_SYNCE_ENABLE; val = 0; break; case YTPHY_DTS_OUTPUT_CLK_25M: mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | YT8531_SCR_CLK_FRE_SEL_125M; val = YT8531_SCR_SYNCE_ENABLE | FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, YT8531_SCR_CLK_SRC_REF_25M); break; case YTPHY_DTS_OUTPUT_CLK_125M: mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | YT8531_SCR_CLK_FRE_SEL_125M; val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, YT8531_SCR_CLK_SRC_PLL_125M); break; default: phydev_warn(phydev, "Freq err:%u\n", freq); return -EINVAL; } } else { phydev_warn(phydev, "PHY id err\n"); return -EINVAL; } return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, val); } static int yt8531_probe(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; u16 mask, val; u32 freq; if (of_property_read_u32(node, "motorcomm,clk-out-frequency-hz", &freq)) freq = YTPHY_DTS_OUTPUT_CLK_DIS; switch (freq) { case YTPHY_DTS_OUTPUT_CLK_DIS: mask = YT8531_SCR_SYNCE_ENABLE; val = 0; break; case YTPHY_DTS_OUTPUT_CLK_25M: mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | YT8531_SCR_CLK_FRE_SEL_125M; val = YT8531_SCR_SYNCE_ENABLE | FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, YT8531_SCR_CLK_SRC_REF_25M); break; case YTPHY_DTS_OUTPUT_CLK_125M: mask = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_SRC_MASK | YT8531_SCR_CLK_FRE_SEL_125M; val = YT8531_SCR_SYNCE_ENABLE | YT8531_SCR_CLK_FRE_SEL_125M | FIELD_PREP(YT8531_SCR_CLK_SRC_MASK, YT8531_SCR_CLK_SRC_PLL_125M); break; default: phydev_warn(phydev, "Freq err:%u\n", freq); return -EINVAL; } return ytphy_modify_ext_with_lock(phydev, YTPHY_SYNCE_CFG_REG, mask, val); } /** * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp * @phydev: a pointer to a &struct phy_device * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_utp_read_lpa(struct phy_device *phydev) { int lpa, lpagb; if (phydev->autoneg == AUTONEG_ENABLE) { if (!phydev->autoneg_complete) { mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, 0); mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, 0); return 0; } if (phydev->is_gigabit_capable) { lpagb = __phy_read(phydev, MII_STAT1000); if (lpagb < 0) return lpagb; if (lpagb & LPA_1000MSFAIL) { int adv = __phy_read(phydev, MII_CTRL1000); if (adv < 0) return adv; if (adv & CTL1000_ENABLE_MASTER) phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); else phydev_err(phydev, "Master/Slave resolution failed\n"); return -ENOLINK; } mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, lpagb); } lpa = __phy_read(phydev, MII_LPA); if (lpa < 0) return lpa; mii_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); } else { linkmode_zero(phydev->lp_advertising); } return 0; } /** * yt8521_adjust_status() - update speed and duplex to phydev. when in fiber * mode, adjust speed and duplex. * @phydev: a pointer to a &struct phy_device * @status: yt8521 status read from YTPHY_SPECIFIC_STATUS_REG * @is_utp: false(yt8521 work in fiber mode) or true(yt8521 work in utp mode) * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 */ static int yt8521_adjust_status(struct phy_device *phydev, int status, bool is_utp) { int speed_mode, duplex; int speed; int err; int lpa; if (is_utp) duplex = (status & YTPHY_SSR_DUPLEX) >> YTPHY_SSR_DUPLEX_OFFSET; else duplex = DUPLEX_FULL; /* for fiber, it always DUPLEX_FULL */ speed_mode = status & YTPHY_SSR_SPEED_MASK; switch (speed_mode) { case YTPHY_SSR_SPEED_10M: if (is_utp) speed = SPEED_10; else /* for fiber, it will never run here, default to * SPEED_UNKNOWN */ speed = SPEED_UNKNOWN; break; case YTPHY_SSR_SPEED_100M: speed = SPEED_100; break; case YTPHY_SSR_SPEED_1000M: speed = SPEED_1000; break; default: speed = SPEED_UNKNOWN; break; } phydev->speed = speed; phydev->duplex = duplex; if (is_utp) { err = ytphy_utp_read_lpa(phydev); if (err < 0) return err; phy_resolve_aneg_pause(phydev); } else { lpa = __phy_read(phydev, MII_LPA); if (lpa < 0) return lpa; /* only support 1000baseX Full */ linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, phydev->lp_advertising, lpa & LPA_1000XFULL); if (!(lpa & YTPHY_FLPA_PAUSE)) { phydev->pause = 0; phydev->asym_pause = 0; } else if ((lpa & YTPHY_FLPA_ASYM_PAUSE)) { phydev->pause = 1; phydev->asym_pause = 1; } else { phydev->pause = 1; phydev->asym_pause = 0; } } return 0; } /** * yt8521_read_status_paged() - determines the speed and duplex of one page * @phydev: a pointer to a &struct phy_device * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to * operate. * * returns 1 (utp or fiber link),0 (no link) or negative errno code */ static int yt8521_read_status_paged(struct phy_device *phydev, int page) { int fiber_latch_val; int fiber_curr_val; int old_page; int ret = 0; int status; int link; linkmode_zero(phydev->lp_advertising); phydev->duplex = DUPLEX_UNKNOWN; phydev->speed = SPEED_UNKNOWN; phydev->asym_pause = 0; phydev->pause = 0; /* YT8521 has two reg space (utp/fiber) for linkup with utp/fiber * respectively. but for utp/fiber combo mode, reg space should be * arbitrated based on media priority. by default, utp takes * priority. reg space should be properly set before read * YTPHY_SPECIFIC_STATUS_REG. */ page &= YT8521_RSSR_SPACE_MASK; old_page = phy_select_page(phydev, page); if (old_page < 0) goto err_restore_page; /* Read YTPHY_SPECIFIC_STATUS_REG, which indicates the speed and duplex * of the PHY is actually using. */ ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); if (ret < 0) goto err_restore_page; status = ret; link = !!(status & YTPHY_SSR_LINK); /* When PHY is in fiber mode, speed transferred from 1000Mbps to * 100Mbps,there is not link down from YTPHY_SPECIFIC_STATUS_REG, so * we need check MII_BMSR to identify such case. */ if (page == YT8521_RSSR_FIBER_SPACE) { ret = __phy_read(phydev, MII_BMSR); if (ret < 0) goto err_restore_page; fiber_latch_val = ret; ret = __phy_read(phydev, MII_BMSR); if (ret < 0) goto err_restore_page; fiber_curr_val = ret; if (link && fiber_latch_val != fiber_curr_val) { link = 0; phydev_info(phydev, "%s, fiber link down detect, latch = %04x, curr = %04x\n", __func__, fiber_latch_val, fiber_curr_val); } } else { /* Read autonegotiation status */ ret = __phy_read(phydev, MII_BMSR); if (ret < 0) goto err_restore_page; phydev->autoneg_complete = ret & BMSR_ANEGCOMPLETE ? 1 : 0; } if (link) { if (page == YT8521_RSSR_UTP_SPACE) yt8521_adjust_status(phydev, status, true); else yt8521_adjust_status(phydev, status, false); } return phy_restore_page(phydev, old_page, link); err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8521_read_status() - determines the negotiated speed and duplex * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_read_status(struct phy_device *phydev) { struct yt8521_priv *priv = phydev->priv; int link_fiber = 0; int link_utp; int link; int ret; if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { link = yt8521_read_status_paged(phydev, priv->reg_page); if (link < 0) return link; } else { /* when page is YT8521_RSSR_TO_BE_ARBITRATED, arbitration is * needed. by default, utp is higher priority. */ link_utp = yt8521_read_status_paged(phydev, YT8521_RSSR_UTP_SPACE); if (link_utp < 0) return link_utp; if (!link_utp) { link_fiber = yt8521_read_status_paged(phydev, YT8521_RSSR_FIBER_SPACE); if (link_fiber < 0) return link_fiber; } link = link_utp || link_fiber; } if (link) { if (phydev->link == 0) { /* arbitrate reg space based on linkup media type. */ if (priv->polling_mode == YT8521_MODE_POLL && priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { if (link_fiber) priv->reg_page = YT8521_RSSR_FIBER_SPACE; else priv->reg_page = YT8521_RSSR_UTP_SPACE; ret = ytphy_write_ext_with_lock(phydev, YT8521_REG_SPACE_SELECT_REG, priv->reg_page); if (ret < 0) return ret; phydev->port = link_fiber ? PORT_FIBRE : PORT_TP; phydev_info(phydev, "%s, link up, media: %s\n", __func__, (phydev->port == PORT_TP) ? "UTP" : "Fiber"); } } phydev->link = 1; } else { if (phydev->link == 1) { phydev_info(phydev, "%s, link down, media: %s\n", __func__, (phydev->port == PORT_TP) ? "UTP" : "Fiber"); /* When in YT8521_MODE_POLL mode, need prepare for next * arbitration. */ if (priv->polling_mode == YT8521_MODE_POLL) { priv->reg_page = YT8521_RSSR_TO_BE_ARBITRATED; phydev->port = PORT_NONE; } } phydev->link = 0; } return 0; } /** * yt8521_modify_bmcr_paged - bits modify a PHY's BMCR register of one page * @phydev: the phy_device struct * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to operate * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * NOTE: Convenience function which allows a PHY's BMCR register to be * modified as new register value = (old register value & ~mask) | set. * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space * has MII_BMCR. poll mode combines utp and faber,so need do both. * If it is reset, it will wait for completion. * * returns 0 or negative errno code */ static int yt8521_modify_bmcr_paged(struct phy_device *phydev, int page, u16 mask, u16 set) { int max_cnt = 500; /* the max wait time of reset ~ 500 ms */ int old_page; int ret = 0; old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); if (old_page < 0) goto err_restore_page; ret = __phy_modify(phydev, MII_BMCR, mask, set); if (ret < 0) goto err_restore_page; /* If it is reset, need to wait for the reset to complete */ if (set == BMCR_RESET) { while (max_cnt--) { usleep_range(1000, 1100); ret = __phy_read(phydev, MII_BMCR); if (ret < 0) goto err_restore_page; if (!(ret & BMCR_RESET)) return phy_restore_page(phydev, old_page, 0); } } err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8521_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register * @phydev: the phy_device struct * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * NOTE: Convenience function which allows a PHY's BMCR register to be * modified as new register value = (old register value & ~mask) | set. * YT8521 has two space (utp/fiber) and three mode (utp/fiber/poll), each space * has MII_BMCR. poll mode combines utp and faber,so need do both. * * returns 0 or negative errno code */ static int yt8521_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask, u16 set) { struct yt8521_priv *priv = phydev->priv; int ret; if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ret = yt8521_modify_bmcr_paged(phydev, priv->reg_page, mask, set); if (ret < 0) return ret; } else { ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE, mask, set); if (ret < 0) return ret; ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE, mask, set); if (ret < 0) return ret; } return 0; } /** * yt8521_soft_reset() - called to issue a PHY software reset * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_soft_reset(struct phy_device *phydev) { return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_RESET); } /** * yt8521_suspend() - suspend the hardware * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_suspend(struct phy_device *phydev) { int wol_config; /* YTPHY_WOL_CONFIG_REG is common ext reg */ wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); if (wol_config < 0) return wol_config; /* if wol enable, do nothing */ if (wol_config & YTPHY_WCR_ENABLE) return 0; return yt8521_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN); } /** * yt8521_resume() - resume the hardware * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_resume(struct phy_device *phydev) { int ret; int wol_config; /* disable auto sleep */ ret = ytphy_modify_ext_with_lock(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, YT8521_ESC1R_SLEEP_SW, 0); if (ret < 0) return ret; wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); if (wol_config < 0) return wol_config; /* if wol enable, do nothing */ if (wol_config & YTPHY_WCR_ENABLE) return 0; return yt8521_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0); } /** * yt8521_config_init() - called to initialize the PHY * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_config_init(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; int old_page; int ret = 0; old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) goto err_restore_page; /* set rgmii delay mode */ if (phydev->interface != PHY_INTERFACE_MODE_SGMII) { ret = ytphy_rgmii_clk_delay_config(phydev); if (ret < 0) goto err_restore_page; } if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { /* disable auto sleep */ ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, YT8521_ESC1R_SLEEP_SW, 0); if (ret < 0) goto err_restore_page; } if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { /* enable RXC clock when no wire plug */ ret = ytphy_modify_ext(phydev, YT8521_CLOCK_GATING_REG, YT8521_CGR_RX_CLK_EN, 0); if (ret < 0) goto err_restore_page; } err_restore_page: return phy_restore_page(phydev, old_page, ret); } static int yt8531_config_init(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; int ret; ret = ytphy_rgmii_clk_delay_config_with_lock(phydev); if (ret < 0) return ret; if (of_property_read_bool(node, "motorcomm,auto-sleep-disabled")) { /* disable auto sleep */ ret = ytphy_modify_ext_with_lock(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, YT8521_ESC1R_SLEEP_SW, 0); if (ret < 0) return ret; } if (of_property_read_bool(node, "motorcomm,keep-pll-enabled")) { /* enable RXC clock when no wire plug */ ret = ytphy_modify_ext_with_lock(phydev, YT8521_CLOCK_GATING_REG, YT8521_CGR_RX_CLK_EN, 0); if (ret < 0) return ret; } ret = yt8531_set_ds(phydev); if (ret < 0) return ret; return 0; } /** * yt8531_link_change_notify() - Adjust the tx clock direction according to * the current speed and dts config. * @phydev: a pointer to a &struct phy_device * * NOTE: This function is only used to adapt to VF2 with JH7110 SoC. Please * keep "motorcomm,tx-clk-adj-enabled" not exist in dts when the soc is not * JH7110. */ static void yt8531_link_change_notify(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; bool tx_clk_1000_inverted = false; bool tx_clk_100_inverted = false; bool tx_clk_10_inverted = false; bool tx_clk_adj_enabled = false; u16 val = 0; int ret; if (of_property_read_bool(node, "motorcomm,tx-clk-adj-enabled")) tx_clk_adj_enabled = true; if (!tx_clk_adj_enabled) return; if (of_property_read_bool(node, "motorcomm,tx-clk-10-inverted")) tx_clk_10_inverted = true; if (of_property_read_bool(node, "motorcomm,tx-clk-100-inverted")) tx_clk_100_inverted = true; if (of_property_read_bool(node, "motorcomm,tx-clk-1000-inverted")) tx_clk_1000_inverted = true; if (phydev->speed < 0) return; switch (phydev->speed) { case SPEED_1000: if (tx_clk_1000_inverted) val = YT8521_RC1R_TX_CLK_SEL_INVERTED; break; case SPEED_100: if (tx_clk_100_inverted) val = YT8521_RC1R_TX_CLK_SEL_INVERTED; break; case SPEED_10: if (tx_clk_10_inverted) val = YT8521_RC1R_TX_CLK_SEL_INVERTED; break; default: return; } ret = ytphy_modify_ext_with_lock(phydev, YT8521_RGMII_CONFIG1_REG, YT8521_RC1R_TX_CLK_SEL_INVERTED, val); if (ret < 0) phydev_warn(phydev, "Modify TX_CLK_SEL err:%d\n", ret); } /** * yt8521_prepare_fiber_features() - A small helper function that setup * fiber's features. * @phydev: a pointer to a &struct phy_device * @dst: a pointer to store fiber's features */ static void yt8521_prepare_fiber_features(struct phy_device *phydev, unsigned long *dst) { linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, dst); linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, dst); linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, dst); linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, dst); } /** * yt8521_fiber_setup_forced - configures/forces speed from @phydev * @phydev: target phy_device struct * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int yt8521_fiber_setup_forced(struct phy_device *phydev) { u16 val; int ret; if (phydev->speed == SPEED_1000) val = YTPHY_MCR_FIBER_1000BX; else if (phydev->speed == SPEED_100) val = YTPHY_MCR_FIBER_100FX; else return -EINVAL; ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); if (ret < 0) return ret; /* disable Fiber auto sensing */ ret = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, YT8521_LTCR_EN_AUTOSEN, 0); if (ret < 0) return ret; ret = ytphy_modify_ext(phydev, YTPHY_MISC_CONFIG_REG, YTPHY_MCR_FIBER_SPEED_MASK, val); if (ret < 0) return ret; return ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, YT8521_CCR_SW_RST, 0); } /** * ytphy_check_and_restart_aneg - Enable and restart auto-negotiation * @phydev: target phy_device struct * @restart: whether aneg restart is requested * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) { int ret; if (!restart) { /* Advertisement hasn't changed, but maybe aneg was never on to * begin with? Or maybe phy was isolated? */ ret = __phy_read(phydev, MII_BMCR); if (ret < 0) return ret; if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) restart = true; } /* Enable and Restart Autonegotiation * Don't isolate the PHY if we're negotiating */ if (restart) return __phy_modify(phydev, MII_BMCR, BMCR_ISOLATE, BMCR_ANENABLE | BMCR_ANRESTART); return 0; } /** * yt8521_fiber_config_aneg - restart auto-negotiation or write * YTPHY_MISC_CONFIG_REG. * @phydev: target phy_device struct * * NOTE:The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int yt8521_fiber_config_aneg(struct phy_device *phydev) { int err, changed = 0; int bmcr; u16 adv; if (phydev->autoneg != AUTONEG_ENABLE) return yt8521_fiber_setup_forced(phydev); /* enable Fiber auto sensing */ err = ytphy_modify_ext(phydev, YT8521_LINK_TIMER_CFG2_REG, 0, YT8521_LTCR_EN_AUTOSEN); if (err < 0) return err; err = ytphy_modify_ext(phydev, YT8521_CHIP_CONFIG_REG, YT8521_CCR_SW_RST, 0); if (err < 0) return err; bmcr = __phy_read(phydev, MII_BMCR); if (bmcr < 0) return bmcr; /* When it is coming from fiber forced mode, add bmcr power down * and power up to let aneg work fine. */ if (!(bmcr & BMCR_ANENABLE)) { __phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN); usleep_range(1000, 1100); __phy_modify(phydev, MII_BMCR, BMCR_PDOWN, 0); } adv = linkmode_adv_to_mii_adv_x(phydev->advertising, ETHTOOL_LINK_MODE_1000baseX_Full_BIT); /* Setup fiber advertisement */ err = __phy_modify_changed(phydev, MII_ADVERTISE, ADVERTISE_1000XHALF | ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM, adv); if (err < 0) return err; if (err > 0) changed = 1; return ytphy_check_and_restart_aneg(phydev, changed); } /** * ytphy_setup_master_slave * @phydev: target phy_device struct * * NOTE: The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_setup_master_slave(struct phy_device *phydev) { u16 ctl = 0; if (!phydev->is_gigabit_capable) return 0; switch (phydev->master_slave_set) { case MASTER_SLAVE_CFG_MASTER_PREFERRED: ctl |= CTL1000_PREFER_MASTER; break; case MASTER_SLAVE_CFG_SLAVE_PREFERRED: break; case MASTER_SLAVE_CFG_MASTER_FORCE: ctl |= CTL1000_AS_MASTER; fallthrough; case MASTER_SLAVE_CFG_SLAVE_FORCE: ctl |= CTL1000_ENABLE_MASTER; break; case MASTER_SLAVE_CFG_UNKNOWN: case MASTER_SLAVE_CFG_UNSUPPORTED: return 0; default: phydev_warn(phydev, "Unsupported Master/Slave mode\n"); return -EOPNOTSUPP; } return __phy_modify_changed(phydev, MII_CTRL1000, (CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER | CTL1000_PREFER_MASTER), ctl); } /** * ytphy_utp_config_advert - sanitize and advertise auto-negotiation parameters * @phydev: target phy_device struct * * NOTE: Writes MII_ADVERTISE with the appropriate values, * after sanitizing the values to make sure we only advertise * what is supported. Returns < 0 on error, 0 if the PHY's advertisement * hasn't changed, and > 0 if it has changed. * The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_utp_config_advert(struct phy_device *phydev) { int err, bmsr, changed = 0; u32 adv; /* Only allow advertising what this PHY supports */ linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); adv = linkmode_adv_to_mii_adv_t(phydev->advertising); /* Setup standard advertisement */ err = __phy_modify_changed(phydev, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, adv); if (err < 0) return err; if (err > 0) changed = 1; bmsr = __phy_read(phydev, MII_BMSR); if (bmsr < 0) return bmsr; /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a * logical 1. */ if (!(bmsr & BMSR_ESTATEN)) return changed; adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); err = __phy_modify_changed(phydev, MII_CTRL1000, ADVERTISE_1000FULL | ADVERTISE_1000HALF, adv); if (err < 0) return err; if (err > 0) changed = 1; return changed; } /** * ytphy_utp_config_aneg - restart auto-negotiation or write BMCR * @phydev: target phy_device struct * @changed: whether autoneg is requested * * NOTE: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we write the BMCR. * The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_utp_config_aneg(struct phy_device *phydev, bool changed) { int err; u16 ctl; err = ytphy_setup_master_slave(phydev); if (err < 0) return err; else if (err) changed = true; if (phydev->autoneg != AUTONEG_ENABLE) { /* configures/forces speed/duplex from @phydev */ ctl = mii_bmcr_encode_fixed(phydev->speed, phydev->duplex); return __phy_modify(phydev, MII_BMCR, ~(BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN), ctl); } err = ytphy_utp_config_advert(phydev); if (err < 0) /* error */ return err; else if (err) changed = true; return ytphy_check_and_restart_aneg(phydev, changed); } /** * yt8521_config_aneg_paged() - switch reg space then call genphy_config_aneg * of one page * @phydev: a pointer to a &struct phy_device * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to * operate. * * returns 0 or negative errno code */ static int yt8521_config_aneg_paged(struct phy_device *phydev, int page) { __ETHTOOL_DECLARE_LINK_MODE_MASK(fiber_supported); struct yt8521_priv *priv = phydev->priv; int old_page; int ret = 0; page &= YT8521_RSSR_SPACE_MASK; old_page = phy_select_page(phydev, page); if (old_page < 0) goto err_restore_page; /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, * phydev->advertising should be updated. */ if (priv->reg_page == YT8521_RSSR_TO_BE_ARBITRATED) { linkmode_zero(fiber_supported); yt8521_prepare_fiber_features(phydev, fiber_supported); /* prepare fiber_supported, then setup advertising. */ if (page == YT8521_RSSR_FIBER_SPACE) { linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, fiber_supported); linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, fiber_supported); linkmode_and(phydev->advertising, priv->combo_advertising, fiber_supported); } else { /* ETHTOOL_LINK_MODE_Autoneg_BIT is also used in utp */ linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, fiber_supported); linkmode_andnot(phydev->advertising, priv->combo_advertising, fiber_supported); } } if (page == YT8521_RSSR_FIBER_SPACE) ret = yt8521_fiber_config_aneg(phydev); else ret = ytphy_utp_config_aneg(phydev, false); err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8521_config_aneg() - change reg space then call yt8521_config_aneg_paged * @phydev: a pointer to a &struct phy_device * * returns 0 or negative errno code */ static int yt8521_config_aneg(struct phy_device *phydev) { struct yt8521_priv *priv = phydev->priv; int ret; if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ret = yt8521_config_aneg_paged(phydev, priv->reg_page); if (ret < 0) return ret; } else { /* If reg_page is YT8521_RSSR_TO_BE_ARBITRATED, * phydev->advertising need to be saved at first run. * Because it contains the advertising which supported by both * mac and yt8521(utp and fiber). */ if (linkmode_empty(priv->combo_advertising)) { linkmode_copy(priv->combo_advertising, phydev->advertising); } ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_UTP_SPACE); if (ret < 0) return ret; ret = yt8521_config_aneg_paged(phydev, YT8521_RSSR_FIBER_SPACE); if (ret < 0) return ret; /* we don't known which will be link, so restore * phydev->advertising as default value. */ linkmode_copy(phydev->advertising, priv->combo_advertising); } return 0; } /** * yt8521_aneg_done_paged() - determines the auto negotiation result of one * page. * @phydev: a pointer to a &struct phy_device * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to * operate. * * returns 0(no link)or 1(fiber or utp link) or negative errno code */ static int yt8521_aneg_done_paged(struct phy_device *phydev, int page) { int old_page; int ret = 0; int link; old_page = phy_select_page(phydev, page & YT8521_RSSR_SPACE_MASK); if (old_page < 0) goto err_restore_page; ret = __phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); if (ret < 0) goto err_restore_page; link = !!(ret & YTPHY_SSR_LINK); ret = link; err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8521_aneg_done() - determines the auto negotiation result * @phydev: a pointer to a &struct phy_device * * returns 0(no link)or 1(fiber or utp link) or negative errno code */ static int yt8521_aneg_done(struct phy_device *phydev) { struct yt8521_priv *priv = phydev->priv; int link_fiber = 0; int link_utp; int link; if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { link = yt8521_aneg_done_paged(phydev, priv->reg_page); } else { link_utp = yt8521_aneg_done_paged(phydev, YT8521_RSSR_UTP_SPACE); if (link_utp < 0) return link_utp; if (!link_utp) { link_fiber = yt8521_aneg_done_paged(phydev, YT8521_RSSR_FIBER_SPACE); if (link_fiber < 0) return link_fiber; } link = link_fiber || link_utp; phydev_info(phydev, "%s, link_fiber: %d, link_utp: %d\n", __func__, link_fiber, link_utp); } return link; } /** * ytphy_utp_read_abilities - read PHY abilities from Clause 22 registers * @phydev: target phy_device struct * * NOTE: Reads the PHY's abilities and populates * phydev->supported accordingly. * The caller must have taken the MDIO bus lock. * * returns 0 or negative errno code */ static int ytphy_utp_read_abilities(struct phy_device *phydev) { int val; linkmode_set_bit_array(phy_basic_ports_array, ARRAY_SIZE(phy_basic_ports_array), phydev->supported); val = __phy_read(phydev, MII_BMSR); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported, val & BMSR_ANEGCAPABLE); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, phydev->supported, val & BMSR_100FULL); linkmode_mod_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, phydev->supported, val & BMSR_100HALF); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, phydev->supported, val & BMSR_10FULL); linkmode_mod_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, phydev->supported, val & BMSR_10HALF); if (val & BMSR_ESTATEN) { val = __phy_read(phydev, MII_ESTATUS); if (val < 0) return val; linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, phydev->supported, val & ESTATUS_1000_TFULL); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, phydev->supported, val & ESTATUS_1000_THALF); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, phydev->supported, val & ESTATUS_1000_XFULL); } return 0; } /** * yt8521_get_features_paged() - read supported link modes for one page * @phydev: a pointer to a &struct phy_device * @page: The reg page(YT8521_RSSR_FIBER_SPACE/YT8521_RSSR_UTP_SPACE) to * operate. * * returns 0 or negative errno code */ static int yt8521_get_features_paged(struct phy_device *phydev, int page) { int old_page; int ret = 0; page &= YT8521_RSSR_SPACE_MASK; old_page = phy_select_page(phydev, page); if (old_page < 0) goto err_restore_page; if (page == YT8521_RSSR_FIBER_SPACE) { linkmode_zero(phydev->supported); yt8521_prepare_fiber_features(phydev, phydev->supported); } else { ret = ytphy_utp_read_abilities(phydev); if (ret < 0) goto err_restore_page; } err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8521_get_features - switch reg space then call yt8521_get_features_paged * @phydev: target phy_device struct * * returns 0 or negative errno code */ static int yt8521_get_features(struct phy_device *phydev) { struct yt8521_priv *priv = phydev->priv; int ret; if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) { ret = yt8521_get_features_paged(phydev, priv->reg_page); } else { ret = yt8521_get_features_paged(phydev, YT8521_RSSR_UTP_SPACE); if (ret < 0) return ret; /* add fiber's features to phydev->supported */ yt8521_prepare_fiber_features(phydev, phydev->supported); } return ret; } /** * yt8821_get_features - read mmd register to get 2.5G capability * @phydev: target phy_device struct * * Returns: 0 or negative errno code */ static int yt8821_get_features(struct phy_device *phydev) { int ret; ret = genphy_c45_pma_read_ext_abilities(phydev); if (ret < 0) return ret; return genphy_read_abilities(phydev); } /** * yt8821_get_rate_matching - read register to get phy chip mode * @phydev: target phy_device struct * @iface: PHY data interface type * * Returns: rate matching type or negative errno code */ static int yt8821_get_rate_matching(struct phy_device *phydev, phy_interface_t iface) { int val; val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); if (val < 0) return val; if (FIELD_GET(YT8521_CCR_MODE_SEL_MASK, val) == YT8821_CHIP_MODE_FORCE_BX2500) return RATE_MATCH_PAUSE; return RATE_MATCH_NONE; } /** * yt8821_aneg_done() - determines the auto negotiation result * @phydev: a pointer to a &struct phy_device * * Returns: 0(no link)or 1(utp link) or negative errno code */ static int yt8821_aneg_done(struct phy_device *phydev) { return yt8521_aneg_done_paged(phydev, YT8521_RSSR_UTP_SPACE); } /** * yt8821_serdes_init() - serdes init * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_serdes_init(struct phy_device *phydev) { int old_page; int ret = 0; u16 mask; u16 set; old_page = phy_select_page(phydev, YT8521_RSSR_FIBER_SPACE); if (old_page < 0) { phydev_err(phydev, "Failed to select page: %d\n", old_page); goto err_restore_page; } ret = __phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0); if (ret < 0) goto err_restore_page; mask = YT8821_SDS_EXT_CSR_VCO_LDO_EN | YT8821_SDS_EXT_CSR_VCO_BIAS_LPF_EN; set = YT8821_SDS_EXT_CSR_VCO_LDO_EN; ret = ytphy_modify_ext(phydev, YT8821_SDS_EXT_CSR_CTRL_REG, mask, set); err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8821_utp_init() - utp init * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_utp_init(struct phy_device *phydev) { int old_page; int ret = 0; u16 mask; u16 save; u16 set; old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) { phydev_err(phydev, "Failed to select page: %d\n", old_page); goto err_restore_page; } mask = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 | YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500 | YT8821_UTP_EXT_RPDN_IPR_SHT_2500; set = YT8821_UTP_EXT_RPDN_BP_FFE_LNG_2500 | YT8821_UTP_EXT_RPDN_BP_FFE_SHT_2500; ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_RPDN_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_VGA_LPF1_CAP_OTHER | YT8821_UTP_EXT_VGA_LPF1_CAP_2500; ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_VGA_LPF1_CAP_CTRL_REG, mask, 0); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_VGA_LPF2_CAP_OTHER | YT8821_UTP_EXT_VGA_LPF2_CAP_2500; ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_VGA_LPF2_CAP_CTRL_REG, mask, 0); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500 | YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500; set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THE_2500, 0x5a) | FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THE_2500, 0x3c); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_TRACE_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_IPR_LNG_2500; set = FIELD_PREP(YT8821_UTP_EXT_IPR_LNG_2500, 0x6c); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_ALPHA_IPR_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000; set = FIELD_PREP(YT8821_UTP_EXT_TRACE_LNG_GAIN_THR_1000, 0x2a); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_ECHO_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000; set = FIELD_PREP(YT8821_UTP_EXT_TRACE_MED_GAIN_THR_1000, 0x22); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_GAIN_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_TH_20DB_2500; set = FIELD_PREP(YT8821_UTP_EXT_TH_20DB_2500, 0x8000); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_TH_20DB_2500_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_MU_COARSE_FR_F_FFE | YT8821_UTP_EXT_MU_COARSE_FR_F_FBE; set = FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FFE, 0x7) | FIELD_PREP(YT8821_UTP_EXT_MU_COARSE_FR_F_FBE, 0x7); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_MU_COARSE_FR_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_MU_FINE_FR_F_FFE | YT8821_UTP_EXT_MU_FINE_FR_F_FBE; set = FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FFE, 0x2) | FIELD_PREP(YT8821_UTP_EXT_MU_FINE_FR_F_FBE, 0x2); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_MU_FINE_FR_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; /* save YT8821_UTP_EXT_PI_CTRL_REG's val for use later */ ret = ytphy_read_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG); if (ret < 0) goto err_restore_page; save = ret; mask = YT8821_UTP_EXT_PI_TX_CLK_SEL_AFE | YT8821_UTP_EXT_PI_RX_CLK_3_SEL_AFE | YT8821_UTP_EXT_PI_RX_CLK_2_SEL_AFE | YT8821_UTP_EXT_PI_RX_CLK_1_SEL_AFE | YT8821_UTP_EXT_PI_RX_CLK_0_SEL_AFE; ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG, mask, 0); if (ret < 0) goto err_restore_page; /* restore YT8821_UTP_EXT_PI_CTRL_REG's val */ ret = ytphy_write_ext(phydev, YT8821_UTP_EXT_PI_CTRL_REG, save); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_FECHO_AMP_TH_HUGE; set = FIELD_PREP(YT8821_UTP_EXT_FECHO_AMP_TH_HUGE, 0x38); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_VCT_CFG6_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_NFR_TX_ABILITY; set = YT8821_UTP_EXT_NFR_TX_ABILITY; ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_TXGE_NFR_FR_THP_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_PLL_SPARE_CFG; set = FIELD_PREP(YT8821_UTP_EXT_PLL_SPARE_CFG, 0xe9); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_PLL_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG | YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG; set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_3_10_ORG, 0x64) | FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_2_10_ORG, 0x64); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_DAC_IMID_CH_2_3_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG | YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG; set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_1_10_ORG, 0x64) | FIELD_PREP(YT8821_UTP_EXT_DAC_IMID_CH_0_10_ORG, 0x64); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_DAC_IMID_CH_0_1_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG | YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG; set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_3_10_ORG, 0x64) | FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_2_10_ORG, 0x64); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_DAC_IMSB_CH_2_3_CTRL_REG, mask, set); if (ret < 0) goto err_restore_page; mask = YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG | YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG; set = FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_1_10_ORG, 0x64) | FIELD_PREP(YT8821_UTP_EXT_DAC_IMSB_CH_0_10_ORG, 0x64); ret = ytphy_modify_ext(phydev, YT8821_UTP_EXT_DAC_IMSB_CH_0_1_CTRL_REG, mask, set); err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8821_auto_sleep_config() - phy auto sleep config * @phydev: a pointer to a &struct phy_device * @enable: true enable auto sleep, false disable auto sleep * * Returns: 0 or negative errno code */ static int yt8821_auto_sleep_config(struct phy_device *phydev, bool enable) { int old_page; int ret = 0; old_page = phy_select_page(phydev, YT8521_RSSR_UTP_SPACE); if (old_page < 0) { phydev_err(phydev, "Failed to select page: %d\n", old_page); goto err_restore_page; } ret = ytphy_modify_ext(phydev, YT8521_EXTREG_SLEEP_CONTROL1_REG, YT8521_ESC1R_SLEEP_SW, enable ? 1 : 0); err_restore_page: return phy_restore_page(phydev, old_page, ret); } /** * yt8821_soft_reset() - soft reset utp and serdes * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_soft_reset(struct phy_device *phydev) { return ytphy_modify_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG, YT8521_CCR_SW_RST, 0); } /** * yt8821_config_init() - phy initializatioin * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_config_init(struct phy_device *phydev) { u8 mode = YT8821_CHIP_MODE_AUTO_BX2500_SGMII; int ret; u16 set; if (phydev->interface == PHY_INTERFACE_MODE_2500BASEX) mode = YT8821_CHIP_MODE_FORCE_BX2500; set = FIELD_PREP(YT8521_CCR_MODE_SEL_MASK, mode); ret = ytphy_modify_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG, YT8521_CCR_MODE_SEL_MASK, set); if (ret < 0) return ret; __set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->possible_interfaces); if (mode == YT8821_CHIP_MODE_AUTO_BX2500_SGMII) { __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->possible_interfaces); phydev->rate_matching = RATE_MATCH_NONE; } else if (mode == YT8821_CHIP_MODE_FORCE_BX2500) { phydev->rate_matching = RATE_MATCH_PAUSE; } ret = yt8821_serdes_init(phydev); if (ret < 0) return ret; ret = yt8821_utp_init(phydev); if (ret < 0) return ret; /* disable auto sleep */ ret = yt8821_auto_sleep_config(phydev, false); if (ret < 0) return ret; /* soft reset */ return yt8821_soft_reset(phydev); } /** * yt8821_adjust_status() - update speed and duplex to phydev * @phydev: a pointer to a &struct phy_device * @val: read from YTPHY_SPECIFIC_STATUS_REG */ static void yt8821_adjust_status(struct phy_device *phydev, int val) { int speed, duplex; int speed_mode; duplex = FIELD_GET(YTPHY_SSR_DUPLEX, val); speed_mode = val & YTPHY_SSR_SPEED_MASK; switch (speed_mode) { case YTPHY_SSR_SPEED_10M: speed = SPEED_10; break; case YTPHY_SSR_SPEED_100M: speed = SPEED_100; break; case YTPHY_SSR_SPEED_1000M: speed = SPEED_1000; break; case YTPHY_SSR_SPEED_2500M: speed = SPEED_2500; break; default: speed = SPEED_UNKNOWN; break; } phydev->speed = speed; phydev->duplex = duplex; } /** * yt8821_update_interface() - update interface per current speed * @phydev: a pointer to a &struct phy_device */ static void yt8821_update_interface(struct phy_device *phydev) { if (!phydev->link) return; switch (phydev->speed) { case SPEED_2500: phydev->interface = PHY_INTERFACE_MODE_2500BASEX; break; case SPEED_1000: case SPEED_100: case SPEED_10: phydev->interface = PHY_INTERFACE_MODE_SGMII; break; default: phydev_warn(phydev, "phy speed err :%d\n", phydev->speed); break; } } /** * yt8821_read_status() - determines the negotiated speed and duplex * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_read_status(struct phy_device *phydev) { int link; int ret; int val; ret = ytphy_write_ext_with_lock(phydev, YT8521_REG_SPACE_SELECT_REG, YT8521_RSSR_UTP_SPACE); if (ret < 0) return ret; ret = genphy_read_status(phydev); if (ret < 0) return ret; if (phydev->autoneg_complete) { ret = genphy_c45_read_lpa(phydev); if (ret < 0) return ret; } ret = phy_read(phydev, YTPHY_SPECIFIC_STATUS_REG); if (ret < 0) return ret; val = ret; link = val & YTPHY_SSR_LINK; if (link) yt8821_adjust_status(phydev, val); if (link) { if (phydev->link == 0) phydev_dbg(phydev, "%s, phy addr: %d, link up\n", __func__, phydev->mdio.addr); phydev->link = 1; } else { if (phydev->link == 1) phydev_dbg(phydev, "%s, phy addr: %d, link down\n", __func__, phydev->mdio.addr); phydev->link = 0; } val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG); if (val < 0) return val; if (FIELD_GET(YT8521_CCR_MODE_SEL_MASK, val) == YT8821_CHIP_MODE_AUTO_BX2500_SGMII) yt8821_update_interface(phydev); return 0; } /** * yt8821_modify_utp_fiber_bmcr - bits modify a PHY's BMCR register * @phydev: the phy_device struct * @mask: bit mask of bits to clear * @set: bit mask of bits to set * * NOTE: Convenience function which allows a PHY's BMCR register to be * modified as new register value = (old register value & ~mask) | set. * * Returns: 0 or negative errno code */ static int yt8821_modify_utp_fiber_bmcr(struct phy_device *phydev, u16 mask, u16 set) { int ret; ret = yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_UTP_SPACE, mask, set); if (ret < 0) return ret; return yt8521_modify_bmcr_paged(phydev, YT8521_RSSR_FIBER_SPACE, mask, set); } /** * yt8821_suspend() - suspend the hardware * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_suspend(struct phy_device *phydev) { int wol_config; wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); if (wol_config < 0) return wol_config; /* if wol enable, do nothing */ if (wol_config & YTPHY_WCR_ENABLE) return 0; return yt8821_modify_utp_fiber_bmcr(phydev, 0, BMCR_PDOWN); } /** * yt8821_resume() - resume the hardware * @phydev: a pointer to a &struct phy_device * * Returns: 0 or negative errno code */ static int yt8821_resume(struct phy_device *phydev) { int wol_config; int ret; /* disable auto sleep */ ret = yt8821_auto_sleep_config(phydev, false); if (ret < 0) return ret; wol_config = ytphy_read_ext_with_lock(phydev, YTPHY_WOL_CONFIG_REG); if (wol_config < 0) return wol_config; /* if wol enable, do nothing */ if (wol_config & YTPHY_WCR_ENABLE) return 0; return yt8821_modify_utp_fiber_bmcr(phydev, BMCR_PDOWN, 0); } static struct phy_driver motorcomm_phy_drvs[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511), .name = "YT8511 Gigabit Ethernet", .config_init = yt8511_config_init, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = yt8511_read_page, .write_page = yt8511_write_page, }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8521), .name = "YT8521 Gigabit Ethernet", .get_features = yt8521_get_features, .probe = yt8521_probe, .read_page = yt8521_read_page, .write_page = yt8521_write_page, .get_wol = ytphy_get_wol, .set_wol = ytphy_set_wol, .config_aneg = yt8521_config_aneg, .aneg_done = yt8521_aneg_done, .config_init = yt8521_config_init, .read_status = yt8521_read_status, .soft_reset = yt8521_soft_reset, .suspend = yt8521_suspend, .resume = yt8521_resume, }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8531), .name = "YT8531 Gigabit Ethernet", .probe = yt8531_probe, .config_init = yt8531_config_init, .suspend = genphy_suspend, .resume = genphy_resume, .get_wol = ytphy_get_wol, .set_wol = yt8531_set_wol, .link_change_notify = yt8531_link_change_notify, }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), .name = "YT8531S Gigabit Ethernet", .get_features = yt8521_get_features, .probe = yt8521_probe, .read_page = yt8521_read_page, .write_page = yt8521_write_page, .get_wol = ytphy_get_wol, .set_wol = ytphy_set_wol, .config_aneg = yt8521_config_aneg, .aneg_done = yt8521_aneg_done, .config_init = yt8521_config_init, .read_status = yt8521_read_status, .soft_reset = yt8521_soft_reset, .suspend = yt8521_suspend, .resume = yt8521_resume, }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8821), .name = "YT8821 2.5Gbps PHY", .get_features = yt8821_get_features, .read_page = yt8521_read_page, .write_page = yt8521_write_page, .get_wol = ytphy_get_wol, .set_wol = ytphy_set_wol, .config_aneg = genphy_config_aneg, .aneg_done = yt8821_aneg_done, .config_init = yt8821_config_init, .get_rate_matching = yt8821_get_rate_matching, .read_status = yt8821_read_status, .soft_reset = yt8821_soft_reset, .suspend = yt8821_suspend, .resume = yt8821_resume, }, }; module_phy_driver(motorcomm_phy_drvs); MODULE_DESCRIPTION("Motorcomm 8511/8521/8531/8531S/8821 PHY driver"); MODULE_AUTHOR("Peter Geis"); MODULE_AUTHOR("Frank"); MODULE_LICENSE("GPL"); static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8531) }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, { PHY_ID_MATCH_EXACT(PHY_ID_YT8821) }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(mdio, motorcomm_tbl);