// SPDX-License-Identifier: GPL-2.0-only /* * Battery driver for Maxim MAX8925 * * Copyright (c) 2009-2010 Marvell International Ltd. * Haojian Zhuang */ #include #include #include #include #include #include #include #include #include /* registers in GPM */ #define MAX8925_OUT5VEN 0x54 #define MAX8925_OUT3VEN 0x58 #define MAX8925_CHG_CNTL1 0x7c /* bits definition */ #define MAX8925_CHG_STAT_VSYSLOW (1 << 0) #define MAX8925_CHG_STAT_MODE_MASK (3 << 2) #define MAX8925_CHG_STAT_EN_MASK (1 << 4) #define MAX8925_CHG_MBDET (1 << 1) #define MAX8925_CHG_AC_RANGE_MASK (3 << 6) /* registers in ADC */ #define MAX8925_ADC_RES_CNFG1 0x06 #define MAX8925_ADC_AVG_CNFG1 0x07 #define MAX8925_ADC_ACQ_CNFG1 0x08 #define MAX8925_ADC_ACQ_CNFG2 0x09 /* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */ #define MAX8925_ADC_AUX2 0x62 #define MAX8925_ADC_VCHG 0x64 #define MAX8925_ADC_VBBATT 0x66 #define MAX8925_ADC_VMBATT 0x68 #define MAX8925_ADC_ISNS 0x6a #define MAX8925_ADC_THM 0x6c #define MAX8925_ADC_TDIE 0x6e #define MAX8925_CMD_AUX2 0xc8 #define MAX8925_CMD_VCHG 0xd0 #define MAX8925_CMD_VBBATT 0xd8 #define MAX8925_CMD_VMBATT 0xe0 #define MAX8925_CMD_ISNS 0xe8 #define MAX8925_CMD_THM 0xf0 #define MAX8925_CMD_TDIE 0xf8 enum { MEASURE_AUX2, MEASURE_VCHG, MEASURE_VBBATT, MEASURE_VMBATT, MEASURE_ISNS, MEASURE_THM, MEASURE_TDIE, MEASURE_MAX, }; struct max8925_power_info { struct max8925_chip *chip; struct i2c_client *gpm; struct i2c_client *adc; struct power_supply *ac; struct power_supply *usb; struct power_supply *battery; int irq_base; unsigned ac_online:1; unsigned usb_online:1; unsigned bat_online:1; unsigned chg_mode:2; unsigned batt_detect:1; /* detecting MB by ID pin */ unsigned topoff_threshold:2; unsigned fast_charge:3; unsigned no_temp_support:1; unsigned no_insert_detect:1; int (*set_charger) (int); }; static int __set_charger(struct max8925_power_info *info, int enable) { struct max8925_chip *chip = info->chip; if (enable) { /* enable charger in platform */ if (info->set_charger) info->set_charger(1); /* enable charger */ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0); } else { /* disable charge */ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); if (info->set_charger) info->set_charger(0); } dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger" : "Disable charger"); return 0; } static irqreturn_t max8925_charger_handler(int irq, void *data) { struct max8925_power_info *info = (struct max8925_power_info *)data; struct max8925_chip *chip = info->chip; switch (irq - chip->irq_base) { case MAX8925_IRQ_VCHG_DC_R: info->ac_online = 1; __set_charger(info, 1); dev_dbg(chip->dev, "Adapter inserted\n"); break; case MAX8925_IRQ_VCHG_DC_F: info->ac_online = 0; __set_charger(info, 0); dev_dbg(chip->dev, "Adapter removed\n"); break; case MAX8925_IRQ_VCHG_THM_OK_F: /* Battery is not ready yet */ dev_dbg(chip->dev, "Battery temperature is out of range\n"); fallthrough; case MAX8925_IRQ_VCHG_DC_OVP: dev_dbg(chip->dev, "Error detection\n"); __set_charger(info, 0); break; case MAX8925_IRQ_VCHG_THM_OK_R: /* Battery is ready now */ dev_dbg(chip->dev, "Battery temperature is in range\n"); break; case MAX8925_IRQ_VCHG_SYSLOW_R: /* VSYS is low */ dev_info(chip->dev, "Sys power is too low\n"); break; case MAX8925_IRQ_VCHG_SYSLOW_F: dev_dbg(chip->dev, "Sys power is above low threshold\n"); break; case MAX8925_IRQ_VCHG_DONE: __set_charger(info, 0); dev_dbg(chip->dev, "Charging is done\n"); break; case MAX8925_IRQ_VCHG_TOPOFF: dev_dbg(chip->dev, "Charging in top-off mode\n"); break; case MAX8925_IRQ_VCHG_TMR_FAULT: __set_charger(info, 0); dev_dbg(chip->dev, "Safe timer is expired\n"); break; case MAX8925_IRQ_VCHG_RST: __set_charger(info, 0); dev_dbg(chip->dev, "Charger is reset\n"); break; } return IRQ_HANDLED; } static int start_measure(struct max8925_power_info *info, int type) { unsigned char buf[2] = {0, 0}; int meas_cmd; int meas_reg = 0, ret; switch (type) { case MEASURE_VCHG: meas_cmd = MAX8925_CMD_VCHG; meas_reg = MAX8925_ADC_VCHG; break; case MEASURE_VBBATT: meas_cmd = MAX8925_CMD_VBBATT; meas_reg = MAX8925_ADC_VBBATT; break; case MEASURE_VMBATT: meas_cmd = MAX8925_CMD_VMBATT; meas_reg = MAX8925_ADC_VMBATT; break; case MEASURE_ISNS: meas_cmd = MAX8925_CMD_ISNS; meas_reg = MAX8925_ADC_ISNS; break; default: return -EINVAL; } max8925_reg_write(info->adc, meas_cmd, 0); max8925_bulk_read(info->adc, meas_reg, 2, buf); ret = ((buf[0]<<8) | buf[1]) >> 4; return ret; } static int max8925_ac_get_prop(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); int ret = 0; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: val->intval = info->ac_online; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: if (info->ac_online) { ret = start_measure(info, MEASURE_VCHG); if (ret >= 0) { val->intval = ret * 2000; /* unit is uV */ goto out; } } ret = -ENODATA; break; default: ret = -ENODEV; break; } out: return ret; } static enum power_supply_property max8925_ac_props[] = { POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_VOLTAGE_NOW, }; static int max8925_usb_get_prop(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); int ret = 0; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: val->intval = info->usb_online; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: if (info->usb_online) { ret = start_measure(info, MEASURE_VCHG); if (ret >= 0) { val->intval = ret * 2000; /* unit is uV */ goto out; } } ret = -ENODATA; break; default: ret = -ENODEV; break; } out: return ret; } static enum power_supply_property max8925_usb_props[] = { POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_VOLTAGE_NOW, }; static int max8925_bat_get_prop(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); int ret = 0; switch (psp) { case POWER_SUPPLY_PROP_ONLINE: val->intval = info->bat_online; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: if (info->bat_online) { ret = start_measure(info, MEASURE_VMBATT); if (ret >= 0) { val->intval = ret * 2000; /* unit is uV */ ret = 0; break; } } ret = -ENODATA; break; case POWER_SUPPLY_PROP_CURRENT_NOW: if (info->bat_online) { ret = start_measure(info, MEASURE_ISNS); if (ret >= 0) { /* assume r_sns is 0.02 */ ret = ((ret * 6250) - 3125) /* uA */; val->intval = 0; if (ret > 0) val->intval = ret; /* unit is mA */ ret = 0; break; } } ret = -ENODATA; break; case POWER_SUPPLY_PROP_CHARGE_TYPE: if (!info->bat_online) { ret = -ENODATA; break; } ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2; switch (ret) { case 1: val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; break; case 0: case 2: val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; break; case 3: val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; break; } ret = 0; break; case POWER_SUPPLY_PROP_STATUS: if (!info->bat_online) { ret = -ENODATA; break; } ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); if (info->usb_online || info->ac_online) { val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; if (ret & MAX8925_CHG_STAT_EN_MASK) val->intval = POWER_SUPPLY_STATUS_CHARGING; } else val->intval = POWER_SUPPLY_STATUS_DISCHARGING; ret = 0; break; default: ret = -ENODEV; break; } return ret; } static enum power_supply_property max8925_battery_props[] = { POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_VOLTAGE_NOW, POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_STATUS, }; static const struct power_supply_desc ac_desc = { .name = "max8925-ac", .type = POWER_SUPPLY_TYPE_MAINS, .properties = max8925_ac_props, .num_properties = ARRAY_SIZE(max8925_ac_props), .get_property = max8925_ac_get_prop, }; static const struct power_supply_desc usb_desc = { .name = "max8925-usb", .type = POWER_SUPPLY_TYPE_USB, .properties = max8925_usb_props, .num_properties = ARRAY_SIZE(max8925_usb_props), .get_property = max8925_usb_get_prop, }; static const struct power_supply_desc battery_desc = { .name = "max8925-battery", .type = POWER_SUPPLY_TYPE_BATTERY, .properties = max8925_battery_props, .num_properties = ARRAY_SIZE(max8925_battery_props), .get_property = max8925_bat_get_prop, }; #define REQUEST_IRQ(_irq, _name) \ do { \ ret = request_threaded_irq(chip->irq_base + _irq, NULL, \ max8925_charger_handler, \ IRQF_ONESHOT, _name, info); \ if (ret) \ dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \ _irq, ret); \ } while (0) static int max8925_init_charger(struct max8925_chip *chip, struct max8925_power_info *info) { int ret; REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp"); if (!info->no_insert_detect) { REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove"); REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert"); } if (!info->no_temp_support) { REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range"); REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range"); } REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high"); REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low"); REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset"); REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done"); REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff"); REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire"); info->usb_online = 0; info->bat_online = 0; /* check for power - can miss interrupt at boot time */ if (start_measure(info, MEASURE_VCHG) * 2000 > 500000) info->ac_online = 1; else info->ac_online = 0; ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); if (ret >= 0) { /* * If battery detection is enabled, ID pin of battery is * connected to MBDET pin of MAX8925. It could be used to * detect battery presence. * Otherwise, we have to assume that battery is always on. */ if (info->batt_detect) info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1; else info->bat_online = 1; if (ret & MAX8925_CHG_AC_RANGE_MASK) info->ac_online = 1; else info->ac_online = 0; } /* disable charge */ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); /* set charging current in charge topoff mode */ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5, info->topoff_threshold << 5); /* set charing current in fast charge mode */ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge); return 0; } static int max8925_deinit_charger(struct max8925_power_info *info) { struct max8925_chip *chip = info->chip; int irq; irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP; for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++) free_irq(irq, info); return 0; } #ifdef CONFIG_OF static struct max8925_power_pdata * max8925_power_dt_init(struct platform_device *pdev) { struct device_node *nproot = pdev->dev.parent->of_node; struct device_node *np; int batt_detect; int topoff_threshold; int fast_charge; int no_temp_support; int no_insert_detect; struct max8925_power_pdata *pdata; if (!nproot) return pdev->dev.platform_data; np = of_get_child_by_name(nproot, "charger"); if (!np) { dev_err(&pdev->dev, "failed to find charger node\n"); return NULL; } pdata = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_pdata), GFP_KERNEL); if (!pdata) goto ret; of_property_read_u32(np, "topoff-threshold", &topoff_threshold); of_property_read_u32(np, "batt-detect", &batt_detect); of_property_read_u32(np, "fast-charge", &fast_charge); of_property_read_u32(np, "no-insert-detect", &no_insert_detect); of_property_read_u32(np, "no-temp-support", &no_temp_support); pdata->batt_detect = batt_detect; pdata->fast_charge = fast_charge; pdata->topoff_threshold = topoff_threshold; pdata->no_insert_detect = no_insert_detect; pdata->no_temp_support = no_temp_support; ret: of_node_put(np); return pdata; } #else static struct max8925_power_pdata * max8925_power_dt_init(struct platform_device *pdev) { return pdev->dev.platform_data; } #endif static int max8925_power_probe(struct platform_device *pdev) { struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); struct power_supply_config psy_cfg = {}; /* Only for ac and usb */ struct max8925_power_pdata *pdata = NULL; struct max8925_power_info *info; pdata = max8925_power_dt_init(pdev); if (!pdata) { dev_err(&pdev->dev, "platform data isn't assigned to " "power supply\n"); return -EINVAL; } info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info), GFP_KERNEL); if (!info) return -ENOMEM; info->chip = chip; info->gpm = chip->i2c; info->adc = chip->adc; platform_set_drvdata(pdev, info); psy_cfg.supplied_to = pdata->supplied_to; psy_cfg.num_supplicants = pdata->num_supplicants; info->ac = devm_power_supply_register(&pdev->dev, &ac_desc, &psy_cfg); if (IS_ERR(info->ac)) return PTR_ERR(info->ac); info->ac->dev.parent = &pdev->dev; info->usb = devm_power_supply_register(&pdev->dev, &usb_desc, &psy_cfg); if (IS_ERR(info->usb)) return PTR_ERR(info->usb); info->usb->dev.parent = &pdev->dev; info->battery = devm_power_supply_register(&pdev->dev, &battery_desc, NULL); if (IS_ERR(info->battery)) return PTR_ERR(info->battery); info->battery->dev.parent = &pdev->dev; info->batt_detect = pdata->batt_detect; info->topoff_threshold = pdata->topoff_threshold; info->fast_charge = pdata->fast_charge; info->set_charger = pdata->set_charger; info->no_temp_support = pdata->no_temp_support; info->no_insert_detect = pdata->no_insert_detect; max8925_init_charger(chip, info); return 0; } static void max8925_power_remove(struct platform_device *pdev) { struct max8925_power_info *info = platform_get_drvdata(pdev); if (info) max8925_deinit_charger(info); } static struct platform_driver max8925_power_driver = { .probe = max8925_power_probe, .remove = max8925_power_remove, .driver = { .name = "max8925-power", }, }; module_platform_driver(max8925_power_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Power supply driver for MAX8925"); MODULE_ALIAS("platform:max8925-power");