OsmoSGSN> enable OsmoSGSN# show timer T3312 = 600 s Periodic RA Update timer (s) (default: 600 s) T3313 = 30 s Waiting for paging response timer (s) (default: 30 s) T3314 = 44 s READY timer. Force to STANDBY on expiry timer (s) (default: 44 s) T3316 = 44 s AA-Ready timer (s) (default: 44 s) T3322 = 6 s Detach request -> accept timer (s) (default: 6 s) T3350 = 6 s Waiting for ATT/RAU/TMSI_COMPL timer (s) (default: 6 s) T3360 = 6 s Waiting for AUTH/CIPH response timer (s) (default: 6 s) T3370 = 6 s Waiting for IDENTITY response timer (s) (default: 6 s) T3385 = 8 s Wait for ACT PDP CTX REQ timer (s) (default: 8 s) T3386 = 8 s Wait for MODIFY PDP CTX ACK timer (s) (default: 8 s) T3395 = 8 s Wait for DEACT PDP CTX ACK timer (s) (default: 8 s) T3397 = 8 s Wait for DEACT AA PDP CTX ACK timer (s) (default: 8 s) X1001 = 5 s RANAP Release timeout. Wait for RANAP Release Complete.On expiry release Iu connection (s) (default: 5 s) OsmoSGSN# configure terminal OsmoSGSN(config)# list ... sgsn ctrl ... ns bssgp ... OsmoSGSN(config)# sgsn OsmoSGSN(config-sgsn)# list ... gtp state-dir PATH gtp local-ip A.B.C.D ggsn <0-255> remote-ip A.B.C.D ggsn <0-255> gtp-version (0|1) ggsn <0-255> echo-interval <1-36000> ggsn <0-255> no echo-interval imsi-acl (add|del) IMSI auth-policy (accept-all|closed|acl-only|remote) authentication (optional|required) encryption gea <0-4> [<0-4>] [<0-4>] [<0-4>] [<0-4>] encryption uea <0-2> [<0-2>] [<0-2>] encryption cipher-plugin-path PATH no encryption cipher-plugin-path PATH gsup ipa-name NAME gsup remote-ip A.B.C.D gsup remote-port <0-65535> gsup oap-id <0-65535> gsup oap-k K gsup oap-opc OPC apn APNAME ggsn <0-255> apn APNAME imsi-prefix IMSIPRE ggsn <0-255> access-point-name NAME no access-point-name NAME cdr filename NAME no cdr filename cdr trap no cdr trap cdr interval <1-2147483647> ggsn dynamic grx-dns-add A.B.C.D timer [TNNNN] [(<0-2147483647>|default)] timer gtp [TNNNN] [(<0-2147483647>|default)] no compression rfc1144 compression rfc1144 active slots <1-256> compression rfc1144 passive no compression v42bis compression v42bis active direction (ms|sgsn|both) codewords <512-65535> strlen <6-250> compression v42bis passive ... OsmoSGSN(config-sgsn)# mme test0 OsmoSGSN(config-sgsn-mme)# gtp remote-ip 1.2.3.4 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 907 10 567 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 202 12 51 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay 907 10 567 OsmoSGSN(config-sgsn-mme)# exit OsmoSGSN(config-sgsn)# mme test1 OsmoSGSN(config-sgsn-mme)# gtp remote-ip 5.6.7.8 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default OsmoSGSN(config-sgsn-mme)# exit OsmoSGSN(config-sgsn)# show running-config ... sgsn ... mme test0 gtp remote-ip 1.2.3.4 gtp ran-info-relay 907 10 567 gtp ran-info-relay 202 12 51 mme test1 gtp remote-ip 5.6.7.8 gtp ran-info-relay default ... OsmoSGSN(config-sgsn)# mme test0 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default % Another MME test1 is already set as default route, remove it before setting it here. OsmoSGSN(config-sgsn-mme)# exit OsmoSGSN(config-sgsn)# mme test1 OsmoSGSN(config-sgsn-mme)# no gtp ran-info-relay default OsmoSGSN(config-sgsn-mme)# exit OsmoSGSN(config-sgsn)# mme test0 OsmoSGSN(config-sgsn-mme)# gtp ran-info-relay default OsmoSGSN(config-sgsn-mme)# exit OsmoSGSN(config-sgsn)# show running-config ... sgsn ... mme test0 gtp remote-ip 1.2.3.4 gtp ran-info-relay default gtp ran-info-relay 907 10 567 gtp ran-info-relay 202 12 51 mme test1 gtp remote-ip 5.6.7.8 ... OsmoSGSN(config-sgsn)# no mme test0 OsmoSGSN(config-sgsn)# show running-config ... sgsn ... no compression v42bis mme test1 gtp remote-ip 5.6.7.8 ... OsmoSGSN(config-sgsn)# no mme test1 OsmoSGSN(config-sgsn)# encryption gea 0 3 OsmoSGSN(config-sgsn)# encryption uea 1 2 OsmoSGSN(config-sgsn)# encryption cipher-plugin-path /foo/bar OsmoSGSN(config-sgsn)# show running-config ... sgsn ... encryption gea 0 3 encryption uea 1 2 encryption cipher-plugin-path /foo/bar ...