Source: openbsc
Maintainer: Osmocom team <openbsc@lists.osmocom.org>
Section: net
Priority: optional
Build-Depends: debhelper (>= 10),
               autotools-dev,
               autoconf-archive,
               pkg-config,
               libdbi0-dev,
               dh-autoreconf,
               libsmpp34-dev (>= 1.13.0),
               libosmocore-dev (>= 1.0.1),
               libosmo-abis-dev (>= 0.6.0),
               libosmo-netif-dev (>= 0.4.0),
               libosmo-sccp-dev (>= 1.0.0),
               libdbd-sqlite3,
               libpcap-dev
Standards-Version: 3.9.8
Vcs-Git: https://gitea.osmocom.org/cellular-infrastructure/openbsc
Vcs-Browser: https://gitea.osmocom.org/cellular-infrastructure/openbsc
Homepage: https://projects.osmocom.org/projects/openbsc

Package: osmocom-bsc-sccplite
Architecture: any
Depends: ${shlibs:Depends},
         ${misc:Depends}
Description: GSM Base Station Controller
 This is the BSC-only version of OpenBSC. It requires a Mobile Switching Center
 (MSC) to operate.
 .
 You might rather prefer to use osmocom-nitb which is considered a
 "GSM Network-in-a-Box" and does not depend on a MSC.

Package: osmocom-nitb
Architecture: any
Depends: ${shlibs:Depends},
         ${misc:Depends},
         libdbd-sqlite3
Description: GSM Network-in-a-Box, implements BSC, MSC, SMSC, HLR, VLR
 This is the Network-in-a-Box version of OpenBSC. It has all the GSM network
 components bundled together. When using osmocom-nitb, there is no need for a
 Mobile Switching Center (MSC) which is needed when using osmocom-bsc-sccplite.

Package: osmocom-bs11-utils
Architecture: any
Depends: ${shlibs:Depends},
         ${misc:Depends}
Description: Command line utilities for Siemens BS-11 BTS
 There is a tool in this package for configuring the Siemens BS-11 BTS.
 Additionally, it contains one tool for making use of an ISDN-card and the
 public telephone network as frequency standard for the E1 line.

Package: osmocom-bsc-nat
Architecture: any
Depends: ${shlibs:Depends},
         ${misc:Depends}
Recommends: osmocom-bsc-sccplite
Description: Osmocom Base Station Controller Network Address Translation
 This NAT is useful for masquerading multiple BSCs behind one. It listens
 for incoming BSCs on port 5000 and connects to a specified Mobile Switching
 Center (MSC).
 .
 This package is part of OpenBSC and closely related to osmocom-bsc-sccplite.

Package: osmo-bsc-mgcp
Architecture: any
Depends: ${shlibs:Depends},
         ${misc:Depends}
Description: OsmoBSC-MGCP: Osmocom's Legacy Media Gateway.

Package: osmocom-bsc-sccplite-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bsc-sccplite (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC BSC
 Make debugging possible

Package: osmocom-nitb-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-nitb (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC NITB
 Make debugging possible

Package: osmocom-bs11-utils-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bs11-utils (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC BS11 utils
 Make debugging possible

Package: osmocom-bsc-nat-dbg
Architecture: any
Section: debug
Priority: extra
Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC Network Address Translation
 Make debugging possible

Package: osmo-bsc-mgcp-dbg
Architecture: any
Section: debug
Priority: extra
Depends: ${misc:Depends}, ${shlibs:Depends}
Description: Debug symbols for the  Osmocom's Legacy Media Gateway.