Failed
gprs:nanobts+band-1900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14919): Process ended prematurely: osmo-stp_10.42.42.5(pid=14919) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14919)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-1900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 21:10:10.751457 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:10.763561 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:10:10.920651 tst iperf3.py: using LAC 16830 21:10:11.047258 tst iperf3.py: using RAC 255 21:10:11.174686 tst iperf3.py: using CellId 16830 21:10:11.298466 tst iperf3.py: using BVCI 16831 21:10:11.321775 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.332636 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.343852 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.355351 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.366539 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.377745 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.388746 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.399771 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:10:11.410966 tst gprs:nanobts+band-1900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:10:11.705319 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:10:11.841145 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:10:12.176633 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14911): Launched 21:10:12.458041 run iperf3-srv_10.42.42.10(pid=14912): Launched 21:10:12.656245 tst iperf3.py:8: start network... 21:10:12.791255 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:10:13.310902 run create_hlr_db(pid=14913): Launched 21:10:13.497708 bus /gobi_6: Setting Powered False 21:10:14.519244 run create_hlr_db(pid=14913): Terminated: ok {rc=0} 21:10:14.950637 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14915): Launched 21:10:15.275905 run osmo-hlr_10.42.42.2(pid=14916): Launched 21:10:15.396542 run osmo-stp_10.42.42.5: Starting osmo-stp 21:10:16.016662 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14918): Launched 21:10:16.457879 run osmo-stp_10.42.42.5(pid=14919): Launched 21:10:16.609508 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:10:17.264417 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14921): Launched 21:10:17.372613 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:10:17.638284 run patchelf(pid=14922): Launched 21:10:17.815590 run osmo-stp_10.42.42.5(pid=14919): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14919)] 21:10:17.944892 run osmo-stp_10.42.42.5(pid=14919): stdout: | (launched: 2022-12-08_21:10:16.184653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:10:18.074469 run osmo-stp_10.42.42.5(pid=14919): stderr: | �[0;m�[38;5;43m20221208211016483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211016483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211016484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211016484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211016490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211016490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211016491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:10:18.199969 run osmo-stp_10.42.42.5(pid=14919): stdout: | (launched: 2022-12-08_21:10:16.184653) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:10:18.324311 run osmo-stp_10.42.42.5(pid=14919): stderr: | �[0;m�[38;5;43m20221208211016483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208211016483 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208211016484 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208211016484 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208211016490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208211016490 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208211016491 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:10:18.469576 run patchelf(pid=14922): Terminating (SIGINT) 21:10:18.639964 run patchelf(pid=14922): Terminated: ok {rc=0} 21:10:18.671370 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14919): Process ended prematurely: osmo-stp_10.42.42.5(pid=14919) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14919)] [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8] 21:10:18.680534 tst iperf3.py:8: Test FAILED (8.0 sec) 21:10:18.740856 run osmo-hlr_10.42.42.2(pid=14916): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14916)] 21:10:18.789935 run osmo-hlr_10.42.42.2(pid=14916): stdout: | (launched: 2022-12-08_21:10:15.115569) 21:10:18.839141 run osmo-hlr_10.42.42.2(pid=14916): stderr: | �[0;m�[1;31m20221208211015317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208211015317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208211015317 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208211015318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208211015318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208211015318 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208211015330 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-1900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208211015338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208211015338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208211015338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:10:18.881620 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14911): Terminating (SIGTERM) 21:10:18.921558 run iperf3-srv_10.42.42.10(pid=14912): Terminating (SIGTERM) 21:10:18.961142 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14915): Terminating (SIGTERM) 21:10:19.000748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14918): Terminating (SIGTERM) 21:10:19.040440 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14921): Terminating (SIGTERM) 21:10:19.049975 --- ParallelTerminationStrategy: PID 14911 died... 21:10:19.103769 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14911): Terminated: ok {rc=0} 21:10:19.113821 --- ParallelTerminationStrategy: PID 14912 died... 21:10:19.166682 run iperf3-srv_10.42.42.10(pid=14912): Terminated {rc=256} 21:10:19.176508 --- ParallelTerminationStrategy: PID 14915 died... 21:10:19.229265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14915): Terminated: ok {rc=0} 21:10:19.239115 --- ParallelTerminationStrategy: PID 14918 died... 21:10:19.292233 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14918): Terminated: ok {rc=0} 21:10:19.301800 --- ParallelTerminationStrategy: PID 14921 died... 21:10:19.354829 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14921): Terminated: ok {rc=0} 21:10:19.443228 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14919): Process ended prematurely: osmo-stp_10.42.42.5(pid=14919) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14919)]