Failed
gprs:nanobts+band-1900+mod-bts0-egprs.iperf3.py (from gprs_nanobts+band-1900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14847): Process ended prematurely: osmo-stp_10.42.42.5(pid=14847) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14847)]
Standard Output
---------------------------------------------- trial-2349 gprs:nanobts+band-1900+mod-bts0-egprs iperf3.py ---------------------------------------------- 21:09:10.759792 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:10.771936 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 21:09:10.910711 tst iperf3.py: using LAC 16825 21:09:11.032643 tst iperf3.py: using RAC 250 21:09:11.150871 tst iperf3.py: using CellId 16825 21:09:11.269150 tst iperf3.py: using BVCI 16826 21:09:11.292269 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.303448 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.314523 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.325666 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.336862 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.347996 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.359111 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.369764 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 21:09:11.381428 tst gprs:nanobts+band-1900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 21:09:11.660352 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:09:11.787565 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:09:12.099695 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14839): Launched 21:09:12.359904 run iperf3-srv_10.42.42.10(pid=14840): Launched 21:09:12.544685 tst iperf3.py:8: start network... 21:09:12.670350 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:09:13.143794 run create_hlr_db(pid=14841): Launched 21:09:13.317099 bus /gobi_6: Setting Powered False 21:09:14.339456 run create_hlr_db(pid=14841): Terminated: ok {rc=0} 21:09:14.771079 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14843): Launched 21:09:15.097170 run osmo-hlr_10.42.42.2(pid=14844): Launched 21:09:15.215708 run osmo-stp_10.42.42.5: Starting osmo-stp 21:09:15.782039 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14846): Launched 21:09:16.265402 run osmo-stp_10.42.42.5(pid=14847): Launched 21:09:16.408568 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:09:16.991253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14849): Launched 21:09:17.109932 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:09:17.406435 run patchelf(pid=14850): Launched 21:09:17.596531 run osmo-stp_10.42.42.5(pid=14847): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14847)] 21:09:17.735039 run osmo-stp_10.42.42.5(pid=14847): stdout: | (launched: 2022-12-08_21:09:15.952437) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:17.874787 run osmo-stp_10.42.42.5(pid=14847): stderr: | �[0;m�[38;5;43m20221208210916193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210916193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210916194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210916194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210916194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210916195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210916195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:18.008855 run osmo-stp_10.42.42.5(pid=14847): stdout: | (launched: 2022-12-08_21:09:15.952437) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:09:18.141922 run osmo-stp_10.42.42.5(pid=14847): stderr: | �[0;m�[38;5;43m20221208210916193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210916193 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210916194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210916194 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210916194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210916195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210916195 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:09:18.297294 run patchelf(pid=14850): Terminating (SIGINT) 21:09:18.479682 run patchelf(pid=14850): Terminated: ok {rc=0} 21:09:18.513026 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14847): Process ended prematurely: osmo-stp_10.42.42.5(pid=14847) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14847)] [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8] 21:09:18.522939 tst iperf3.py:8: Test FAILED (7.8 sec) 21:09:18.585244 run osmo-hlr_10.42.42.2(pid=14844): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14844)] 21:09:18.635815 run osmo-hlr_10.42.42.2(pid=14844): stdout: | (launched: 2022-12-08_21:09:14.936324) 21:09:18.687433 run osmo-hlr_10.42.42.2(pid=14844): stderr: | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210915136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210915148 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:nanobts+band-1900+mod-bts0-egprs/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210915157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210915157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210915157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:09:18.731490 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14839): Terminating (SIGTERM) 21:09:18.773398 run iperf3-srv_10.42.42.10(pid=14840): Terminating (SIGTERM) 21:09:18.815274 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14843): Terminating (SIGTERM) 21:09:18.856851 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14846): Terminating (SIGTERM) 21:09:18.898541 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14849): Terminating (SIGTERM) 21:09:18.908296 --- ParallelTerminationStrategy: PID 14839 died... 21:09:18.963651 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14839): Terminated: ok {rc=0} 21:09:18.973887 --- ParallelTerminationStrategy: PID 14840 died... 21:09:19.029232 run iperf3-srv_10.42.42.10(pid=14840): Terminated {rc=256} 21:09:19.039245 --- ParallelTerminationStrategy: PID 14843 died... 21:09:19.094493 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14843): Terminated: ok {rc=0} 21:09:19.104853 --- ParallelTerminationStrategy: PID 14846 died... 21:09:19.160069 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14846): Terminated: ok {rc=0} 21:09:19.170186 --- ParallelTerminationStrategy: PID 14849 died... 21:09:19.225323 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14849): Terminated: ok {rc=0} 21:09:19.310991 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14847): Process ended prematurely: osmo-stp_10.42.42.5(pid=14847) [trial-2349↪gprs:nanobts+band-1900+mod-bts0-egprs↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14847)]