Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10365): Process ended prematurely: osmo-stp_10.42.42.5(pid=10365) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10365)]
Standard Output
---------------------------------------------- trial-2349 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 20:21:30.998231 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.012102 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:21:31.167161 tst iperf3.py: using LAC 16571 20:21:31.298645 tst iperf3.py: using RAC 251 20:21:31.429933 tst iperf3.py: using CellId 16571 20:21:31.573824 tst iperf3.py: using BVCI 16572 20:21:31.598532 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.610107 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.621462 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.634247 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.647972 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.660937 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.673266 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.684870 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:21:31.696838 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:21:32.010914 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:21:32.146035 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:21:32.463873 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10357): Launched 20:21:32.725625 run iperf3-srv_10.42.42.10(pid=10358): Launched 20:21:32.910572 tst iperf3.py:8: start network... 20:21:33.037570 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:21:33.519082 run create_hlr_db(pid=10359): Launched 20:21:33.694042 bus /gobi_6: Setting Powered False 20:21:34.714664 run create_hlr_db(pid=10359): Terminated: ok {rc=0} 20:21:35.118752 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10361): Launched 20:21:35.422331 run osmo-hlr_10.42.42.2(pid=10362): Launched 20:21:35.537704 run osmo-stp_10.42.42.5: Starting osmo-stp 20:21:36.064844 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10364): Launched 20:21:36.366440 run osmo-stp_10.42.42.5(pid=10365): Launched 20:21:36.475367 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:21:37.002857 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10367): Launched 20:21:37.111547 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:21:37.377709 run patchelf(pid=10368): Launched 20:21:37.556138 run osmo-stp_10.42.42.5(pid=10365): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10365)] 20:21:37.686403 run osmo-stp_10.42.42.5(pid=10365): stdout: | (launched: 2022-12-08_20:21:36.218608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:37.816501 run osmo-stp_10.42.42.5(pid=10365): stderr: | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202136386 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:37.942371 run osmo-stp_10.42.42.5(pid=10365): stdout: | (launched: 2022-12-08_20:21:36.218608) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:21:38.066822 run osmo-stp_10.42.42.5(pid=10365): stderr: | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202136386 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202136386 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202136387 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:21:38.212069 run patchelf(pid=10368): Terminating (SIGINT) 20:21:38.382807 run patchelf(pid=10368): Terminated: ok {rc=0} 20:21:38.414291 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=10365): Process ended prematurely: osmo-stp_10.42.42.5(pid=10365) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10365)] [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 20:21:38.423549 tst iperf3.py:8: Test FAILED (7.5 sec) 20:21:38.484050 run osmo-hlr_10.42.42.2(pid=10362): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10362)] 20:21:38.533237 run osmo-hlr_10.42.42.2(pid=10362): stdout: | (launched: 2022-12-08_20:21:35.272702) 20:21:38.583245 run osmo-hlr_10.42.42.2(pid=10362): stderr: | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202135447 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202135459 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202135468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202135468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202135468 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:21:38.625478 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10357): Terminating (SIGTERM) 20:21:38.665550 run iperf3-srv_10.42.42.10(pid=10358): Terminating (SIGTERM) 20:21:38.705804 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10361): Terminating (SIGTERM) 20:21:38.745772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10364): Terminating (SIGTERM) 20:21:38.785623 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10367): Terminating (SIGTERM) 20:21:38.794964 --- ParallelTerminationStrategy: PID 10357 died... 20:21:38.848313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10357): Terminated: ok {rc=0} 20:21:38.858319 --- ParallelTerminationStrategy: PID 10358 died... 20:21:38.911076 run iperf3-srv_10.42.42.10(pid=10358): Terminated {rc=256} 20:21:38.920714 --- ParallelTerminationStrategy: PID 10361 died... 20:21:38.973904 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10361): Terminated: ok {rc=0} 20:21:38.983594 --- ParallelTerminationStrategy: PID 10364 died... 20:21:39.037044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10364): Terminated: ok {rc=0} 20:21:39.046593 --- ParallelTerminationStrategy: PID 10367 died... 20:21:39.100941 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10367): Terminated: ok {rc=0} 20:21:39.189266 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10365): Process ended prematurely: osmo-stp_10.42.42.5(pid=10365) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10365)]