Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10393): Process ended prematurely: osmo-stp_10.42.42.5(pid=10393) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10393)]
Standard Output
---------------------------------------------- trial-2349 gprs:oc2g+mod-bts0-dynts-osmo ping.py ---------------------------------------------- 20:22:00.170560 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.182112 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:22:00.328282 tst ping.py: using LAC 16573 20:22:00.446957 tst ping.py: using RAC 253 20:22:00.565808 tst ping.py: using CellId 16573 20:22:00.690895 tst ping.py: using BVCI 16574 20:22:00.715549 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.727179 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.738582 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.750547 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.762269 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.774289 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.786372 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:22:00.798268 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:22:01.138937 tst ping.py:19: start network... 20:22:01.274130 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:22:01.791341 run create_hlr_db(pid=10387): Launched 20:22:01.971091 bus /gobi_6: Setting Powered False 20:22:02.987352 run create_hlr_db(pid=10387): Terminated: ok {rc=0} 20:22:03.415540 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10389): Launched 20:22:03.735547 run osmo-hlr_10.42.42.2(pid=10390): Launched 20:22:03.854199 run osmo-stp_10.42.42.5: Starting osmo-stp 20:22:04.411249 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10392): Launched 20:22:04.728595 run osmo-stp_10.42.42.5(pid=10393): Launched 20:22:04.842897 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:22:05.401121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10395): Launched 20:22:05.515188 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:22:05.794825 run patchelf(pid=10396): Launched 20:22:05.982553 run osmo-stp_10.42.42.5(pid=10393): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10393)] 20:22:06.119292 run osmo-stp_10.42.42.5(pid=10393): stdout: | (launched: 2022-12-08_20:22:04.573683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:06.256504 run osmo-stp_10.42.42.5(pid=10393): stderr: | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202204764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:06.389335 run osmo-stp_10.42.42.5(pid=10393): stdout: | (launched: 2022-12-08_20:22:04.573683) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:06.520531 run osmo-stp_10.42.42.5(pid=10393): stderr: | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208202204763 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208202204764 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208202204764 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:06.673531 run patchelf(pid=10396): Terminating (SIGINT) 20:22:06.852886 run patchelf(pid=10396): Terminated: ok {rc=0} 20:22:06.885411 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=10393): Process ended prematurely: osmo-stp_10.42.42.5(pid=10393) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10393)] [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22] 20:22:06.894697 tst ping.py:22: Test FAILED (6.7 sec) 20:22:06.957989 run osmo-hlr_10.42.42.2(pid=10390): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10390)] 20:22:07.010170 run osmo-hlr_10.42.42.2(pid=10390): stdout: | (launched: 2022-12-08_20:22:03.578630) 20:22:07.063080 run osmo-hlr_10.42.42.2(pid=10390): stderr: | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208202203773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208202203786 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:oc2g+mod-bts0-dynts-osmo/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208202203795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208202203795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208202203795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:22:07.108083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10389): Terminating (SIGTERM) 20:22:07.150897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10392): Terminating (SIGTERM) 20:22:07.193330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10395): Terminating (SIGTERM) 20:22:07.203136 --- ParallelTerminationStrategy: PID 10389 died... 20:22:07.260027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10389): Terminated: ok {rc=0} 20:22:07.270400 --- ParallelTerminationStrategy: PID 10392 died... 20:22:07.327476 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10392): Terminated: ok {rc=0} 20:22:07.337854 --- ParallelTerminationStrategy: PID 10395 died... 20:22:07.394890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10395): Terminated: ok {rc=0} 20:22:07.482716 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10393): Process ended prematurely: osmo-stp_10.42.42.5(pid=10393) [trial-2349↪gprs:oc2g+mod-bts0-dynts-osmo↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10393)]