Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13625): Process ended prematurely: osmo-stp_10.42.42.5(pid=13625) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13625)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 20:56:06.469297 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:06.480797 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:56:06.647279 tst iperf3.py: using LAC 16755 20:56:06.776826 tst iperf3.py: using RAC 180 20:56:06.904287 tst iperf3.py: using CellId 16755 20:56:07.028118 tst iperf3.py: using BVCI 16756 20:56:07.051349 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.062482 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.073349 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.084524 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.095602 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.106627 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.117772 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.128533 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:07.139681 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:56:07.418536 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 20:56:07.544357 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:56:07.857144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13617): Launched 20:56:08.118388 run iperf3-srv_10.42.42.10(pid=13618): Launched 20:56:08.302032 tst iperf3.py:8: start network... 20:56:08.427300 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:56:08.902723 run create_hlr_db(pid=13619): Launched 20:56:09.076232 bus /gobi_6: Setting Powered False 20:56:10.098188 run create_hlr_db(pid=13619): Terminated: ok {rc=0} 20:56:10.531713 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13621): Launched 20:56:10.856220 run osmo-hlr_10.42.42.2(pid=13622): Launched 20:56:10.974458 run osmo-stp_10.42.42.5: Starting osmo-stp 20:56:11.540484 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13624): Launched 20:56:11.865754 run osmo-stp_10.42.42.5(pid=13625): Launched 20:56:11.984268 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:56:12.551483 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13627): Launched 20:56:12.667458 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:56:12.951137 run patchelf(pid=13628): Launched 20:56:13.141923 run osmo-stp_10.42.42.5(pid=13625): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13625)] 20:56:13.280793 run osmo-stp_10.42.42.5(pid=13625): stdout: | (launched: 2022-12-08_20:56:11.706277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:13.420242 run osmo-stp_10.42.42.5(pid=13625): stderr: | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205611899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:13.555402 run osmo-stp_10.42.42.5(pid=13625): stdout: | (launched: 2022-12-08_20:56:11.706277) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:56:13.689209 run osmo-stp_10.42.42.5(pid=13625): stderr: | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208205611899 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208205611899 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208205611900 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:56:13.844676 run patchelf(pid=13628): Terminating (SIGINT) 20:56:14.026792 run patchelf(pid=13628): Terminated: ok {rc=0} 20:56:14.060124 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13625): Process ended prematurely: osmo-stp_10.42.42.5(pid=13625) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13625)] [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 20:56:14.070293 tst iperf3.py:8: Test FAILED (7.6 sec) 20:56:14.133608 run osmo-hlr_10.42.42.2(pid=13622): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13622)] 20:56:14.185131 run osmo-hlr_10.42.42.2(pid=13622): stdout: | (launched: 2022-12-08_20:56:10.697426) 20:56:14.237274 run osmo-hlr_10.42.42.2(pid=13622): stderr: | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208205610900 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208205610913 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208205610921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208205610921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208205610921 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:56:14.281770 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13617): Terminating (SIGTERM) 20:56:14.323704 run iperf3-srv_10.42.42.10(pid=13618): Terminating (SIGTERM) 20:56:14.365756 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13621): Terminating (SIGTERM) 20:56:14.408324 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13624): Terminating (SIGTERM) 20:56:14.450303 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13627): Terminating (SIGTERM) 20:56:14.460247 --- ParallelTerminationStrategy: PID 13617 died... 20:56:14.516193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13617): Terminated: ok {rc=0} 20:56:14.526246 --- ParallelTerminationStrategy: PID 13618 died... 20:56:14.581832 run iperf3-srv_10.42.42.10(pid=13618): Terminated {rc=256} 20:56:14.591981 --- ParallelTerminationStrategy: PID 13621 died... 20:56:14.647645 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13621): Terminated: ok {rc=0} 20:56:14.657939 --- ParallelTerminationStrategy: PID 13624 died... 20:56:14.713845 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13624): Terminated: ok {rc=0} 20:56:14.724284 --- ParallelTerminationStrategy: PID 13627 died... 20:56:14.780135 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13627): Terminated: ok {rc=0} 20:56:14.867250 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13625): Process ended prematurely: osmo-stp_10.42.42.5(pid=13625) [trial-2349↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13625)]