Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa.ping.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=14177): Process ended prematurely: osmo-stp_10.42.42.5(pid=14177) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14177)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 21:03:28.672027 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:28.683810 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 21:03:28.838707 tst ping.py: using LAC 16794 21:03:28.959941 tst ping.py: using RAC 219 21:03:29.082098 tst ping.py: using CellId 16794 21:03:29.203082 tst ping.py: using BVCI 16795 21:03:29.227416 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.239279 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.250833 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.262294 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.273571 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.284921 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.296410 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 21:03:29.307741 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 21:03:29.580031 tst ping.py:19: start network... 21:03:29.702764 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:03:30.162936 run create_hlr_db(pid=14171): Launched 21:03:30.333320 bus /gobi_6: Setting Powered False 21:03:31.374047 run create_hlr_db(pid=14171): Terminated: ok {rc=0} 21:03:31.812026 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14173): Launched 21:03:32.203863 run osmo-hlr_10.42.42.2(pid=14174): Launched 21:03:32.318837 run osmo-stp_10.42.42.5: Starting osmo-stp 21:03:32.873369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14176): Launched 21:03:33.187307 run osmo-stp_10.42.42.5(pid=14177): Launched 21:03:33.301445 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:03:33.851916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14179): Launched 21:03:33.964081 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:03:34.238482 run patchelf(pid=14180): Launched 21:03:34.423794 run osmo-stp_10.42.42.5(pid=14177): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14177)] 21:03:34.558881 run osmo-stp_10.42.42.5(pid=14177): stdout: | (launched: 2022-12-08_21:03:33.033734) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:03:34.694406 run osmo-stp_10.42.42.5(pid=14177): stderr: | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210333224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:03:34.824604 run osmo-stp_10.42.42.5(pid=14177): stdout: | (launched: 2022-12-08_21:03:33.033734) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:03:34.953924 run osmo-stp_10.42.42.5(pid=14177): stderr: | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210333224 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210333224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210333227 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:03:35.105301 run patchelf(pid=14180): Terminating (SIGINT) 21:03:35.282101 run patchelf(pid=14180): Terminated: ok {rc=0} 21:03:35.314413 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=14177): Process ended prematurely: osmo-stp_10.42.42.5(pid=14177) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14177)] [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22] 21:03:35.323519 tst ping.py:22: Test FAILED (6.6 sec) 21:03:35.385962 run osmo-hlr_10.42.42.2(pid=14174): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14174)] 21:03:35.437141 run osmo-hlr_10.42.42.2(pid=14174): stdout: | (launched: 2022-12-08_21:03:31.975045) 21:03:35.488746 run osmo-hlr_10.42.42.2(pid=14174): stderr: | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210332234 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210332247 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210332258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210332258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210332258 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:03:35.533036 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14173): Terminating (SIGTERM) 21:03:35.575045 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14176): Terminating (SIGTERM) 21:03:35.616802 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14179): Terminating (SIGTERM) 21:03:35.626891 --- ParallelTerminationStrategy: PID 14173 died... 21:03:35.682652 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14173): Terminated: ok {rc=0} 21:03:35.692686 --- ParallelTerminationStrategy: PID 14176 died... 21:03:35.749213 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14176): Terminated: ok {rc=0} 21:03:35.759203 --- ParallelTerminationStrategy: PID 14179 died... 21:03:35.814437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14179): Terminated: ok {rc=0} 21:03:35.900649 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14177): Process ended prematurely: osmo-stp_10.42.42.5(pid=14177) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14177)]