Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14217): Process ended prematurely: osmo-stp_10.42.42.5(pid=14217) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14217)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 21:03:59.382731 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:03:59.394920 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 21:03:59.556655 tst iperf3.py: using LAC 16797 21:03:59.684758 tst iperf3.py: using RAC 222 21:03:59.813151 tst iperf3.py: using CellId 16797 21:03:59.940357 tst iperf3.py: using BVCI 16798 21:03:59.965094 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:03:59.976679 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:03:59.988157 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:03:59.999523 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:04:00.010957 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:04:00.022336 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:04:00.033959 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:04:00.045336 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 21:04:00.056825 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 21:04:00.349708 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:04:00.483406 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:04:00.816245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14209): Launched 21:04:01.111765 run iperf3-srv_10.42.42.10(pid=14210): Launched 21:04:01.300481 tst iperf3.py:8: start network... 21:04:01.429861 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:04:01.964713 run create_hlr_db(pid=14211): Launched 21:04:02.148549 bus /gobi_6: Setting Powered False 21:04:03.165540 run create_hlr_db(pid=14211): Terminated: ok {rc=0} 21:04:03.594735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14213): Launched 21:04:03.916658 run osmo-hlr_10.42.42.2(pid=14214): Launched 21:04:04.032611 run osmo-stp_10.42.42.5: Starting osmo-stp 21:04:04.593138 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14216): Launched 21:04:04.915559 run osmo-stp_10.42.42.5(pid=14217): Launched 21:04:05.032228 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:04:05.595142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14219): Launched 21:04:05.710584 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:04:05.991550 run patchelf(pid=14220): Launched 21:04:06.180262 run osmo-stp_10.42.42.5(pid=14217): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14217)] 21:04:06.318164 run osmo-stp_10.42.42.5(pid=14217): stdout: | (launched: 2022-12-08_21:04:04.757615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:04:06.456279 run osmo-stp_10.42.42.5(pid=14217): stderr: | �[0;m�[38;5;43m20221208210404950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210404950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210404951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210404951 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210404951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210404952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210404952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:04:06.589588 run osmo-stp_10.42.42.5(pid=14217): stdout: | (launched: 2022-12-08_21:04:04.757615) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:04:06.722822 run osmo-stp_10.42.42.5(pid=14217): stderr: | �[0;m�[38;5;43m20221208210404950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210404950 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210404951 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210404951 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210404951 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210404952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210404952 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:04:06.877208 run patchelf(pid=14220): Terminating (SIGINT) 21:04:07.057861 run patchelf(pid=14220): Terminated: ok {rc=0} 21:04:07.091036 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14217): Process ended prematurely: osmo-stp_10.42.42.5(pid=14217) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14217)] [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8] 21:04:07.100905 tst iperf3.py:8: Test FAILED (7.8 sec) 21:04:07.163369 run osmo-hlr_10.42.42.2(pid=14214): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14214)] 21:04:07.214472 run osmo-hlr_10.42.42.2(pid=14214): stdout: | (launched: 2022-12-08_21:04:03.758689) 21:04:07.266155 run osmo-hlr_10.42.42.2(pid=14214): stderr: | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210403957 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210403969 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210403977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210403977 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210403978 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:04:07.310548 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14209): Terminating (SIGTERM) 21:04:07.352353 run iperf3-srv_10.42.42.10(pid=14210): Terminating (SIGTERM) 21:04:07.393979 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14213): Terminating (SIGTERM) 21:04:07.435582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14216): Terminating (SIGTERM) 21:04:07.477118 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14219): Terminating (SIGTERM) 21:04:07.486706 --- ParallelTerminationStrategy: PID 14209 died... 21:04:07.542394 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14209): Terminated: ok {rc=0} 21:04:07.552380 --- ParallelTerminationStrategy: PID 14210 died... 21:04:07.607592 run iperf3-srv_10.42.42.10(pid=14210): Terminated {rc=256} 21:04:07.617906 --- ParallelTerminationStrategy: PID 14213 died... 21:04:07.673340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14213): Terminated: ok {rc=0} 21:04:07.683300 --- ParallelTerminationStrategy: PID 14216 died... 21:04:07.738788 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14216): Terminated: ok {rc=0} 21:04:07.748812 --- ParallelTerminationStrategy: PID 14219 died... 21:04:07.804179 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14219): Terminated: ok {rc=0} 21:04:07.890272 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14217): Process ended prematurely: osmo-stp_10.42.42.5(pid=14217) [trial-2349↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14217)]