Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=13997): Process ended prematurely: osmo-stp_10.42.42.5(pid=13997) [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13997)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 21:00:45.472082 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:45.483301 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:00:45.625249 tst cs_paging_gprs_active.py: using LAC 16781 21:00:45.754432 tst cs_paging_gprs_active.py: using RAC 206 21:00:45.902294 tst cs_paging_gprs_active.py: using CellId 16781 21:00:46.026695 tst cs_paging_gprs_active.py: using BVCI 16782 21:00:46.050925 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.062818 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.074556 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.089197 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.101975 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.113615 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.126459 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.140135 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:46.151904 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:00:46.273616 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:00:46.604548 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 21:00:46.734992 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:00:47.069925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13987): Launched 21:00:47.335429 run iperf3-srv_10.42.42.10(pid=13988): Launched 21:00:47.520880 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 21:00:47.647494 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:00:47.965416 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13989): Launched 21:00:48.226997 run iperf3-srv_10.42.42.10(pid=13990): Launched 21:00:48.411386 tst cs_paging_gprs_active.py:38: start network... 21:00:48.537254 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:00:49.015722 run create_hlr_db(pid=13991): Launched 21:00:49.190224 bus /sierra_2: Setting Powered False 21:00:50.212296 run create_hlr_db(pid=13991): Terminated: ok {rc=0} 21:00:50.649880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13993): Launched 21:00:50.979145 run osmo-hlr_10.42.42.2(pid=13994): Launched 21:00:51.102249 run osmo-stp_10.42.42.5: Starting osmo-stp 21:00:51.673391 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13996): Launched 21:00:52.001015 run osmo-stp_10.42.42.5(pid=13997): Launched 21:00:52.119109 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:00:52.691290 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13999): Launched 21:00:52.807711 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:00:53.094419 run patchelf(pid=14000): Launched 21:00:53.285542 run osmo-stp_10.42.42.5(pid=13997): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13997)] 21:00:53.425185 run osmo-stp_10.42.42.5(pid=13997): stdout: | (launched: 2022-12-08_21:00:51.840290) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:00:53.565447 run osmo-stp_10.42.42.5(pid=13997): stderr: | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210052034 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:00:53.700547 run osmo-stp_10.42.42.5(pid=13997): stdout: | (launched: 2022-12-08_21:00:51.840290) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:00:53.835410 run osmo-stp_10.42.42.5(pid=13997): stderr: | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210052033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210052034 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210052036 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:00:53.991070 run patchelf(pid=14000): Terminating (SIGINT) 21:00:54.174238 run patchelf(pid=14000): Terminated: ok {rc=0} 21:00:54.207820 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13997): Process ended prematurely: osmo-stp_10.42.42.5(pid=13997) [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13997)] [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 21:00:54.217652 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 21:00:54.280383 run osmo-hlr_10.42.42.2(pid=13994): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13994)] 21:00:54.331526 run osmo-hlr_10.42.42.2(pid=13994): stdout: | (launched: 2022-12-08_21:00:50.817221) 21:00:54.383505 run osmo-hlr_10.42.42.2(pid=13994): stderr: | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210051018 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210051030 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210051039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210051039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210051039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:00:54.427920 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13987): Terminating (SIGTERM) 21:00:54.469851 run iperf3-srv_10.42.42.10(pid=13988): Terminating (SIGTERM) 21:00:54.512063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13989): Terminating (SIGTERM) 21:00:54.554044 run iperf3-srv_10.42.42.10(pid=13990): Terminating (SIGTERM) 21:00:54.595915 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13993): Terminating (SIGTERM) 21:00:54.637661 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13996): Terminating (SIGTERM) 21:00:54.679556 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13999): Terminating (SIGTERM) 21:00:54.689463 --- ParallelTerminationStrategy: PID 13987 died... 21:00:54.745271 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13987): Terminated: ok {rc=0} 21:00:54.755723 --- ParallelTerminationStrategy: PID 13988 died... 21:00:54.810960 run iperf3-srv_10.42.42.10(pid=13988): Terminated {rc=256} 21:00:54.821348 --- ParallelTerminationStrategy: PID 13989 died... 21:00:54.876811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13989): Terminated: ok {rc=0} 21:00:54.886950 --- ParallelTerminationStrategy: PID 13990 died... 21:00:54.942048 run iperf3-srv_10.42.42.10(pid=13990): Terminated {rc=256} 21:00:54.952209 --- ParallelTerminationStrategy: PID 13993 died... 21:00:55.007413 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13993): Terminated: ok {rc=0} 21:00:55.017622 --- ParallelTerminationStrategy: PID 13996 died... 21:00:55.072850 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13996): Terminated: ok {rc=0} 21:00:55.083002 --- ParallelTerminationStrategy: PID 13999 died... 21:00:55.138190 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13999): Terminated: ok {rc=0} 21:00:55.224723 bus /gobi_0: Setting Powered False 21:00:56.330719 bus /gobi_0: Setting Powered False 21:00:57.438951 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13997): Process ended prematurely: osmo-stp_10.42.42.5(pid=13997) [trial-2349↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13997)]