Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping_idle_ping.py (from gprs_trx-lms)

Failing for the past 30 builds (Since #2320 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=13456): Process ended prematurely: osmo-stp_10.42.42.5(pid=13456) [trial-2349↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13456)]

Standard Output

----------------------------------------------
trial-2349 gprs:trx-lms ping_idle_ping.py
----------------------------------------------
20:53:44.826584 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:44.837906 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
20:53:44.972335 tst                ping_idle_ping.py: using LAC 16743
20:53:45.090067 tst                ping_idle_ping.py: using RAC 168
20:53:45.206644 tst                ping_idle_ping.py: using CellId 16743
20:53:45.323895 tst                ping_idle_ping.py: using BVCI 16744
20:53:45.346560 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.357145 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.367592 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.378363 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.389067 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.399693 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.410511 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
20:53:45.421276 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
20:53:45.708159 tst             ping_idle_ping.py:24: start network...
20:53:45.846386 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
20:53:46.386981 run         create_hlr_db(pid=13450): Launched
20:53:46.604831 bus                          /gobi_6: Setting Powered False
20:53:47.588559 run         create_hlr_db(pid=13450): Terminated: ok {rc=0}
20:53:48.045443 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13452): Launched
20:53:48.363571 run   osmo-hlr_10.42.42.2(pid=13453): Launched
20:53:48.480266 run              osmo-stp_10.42.42.5: Starting osmo-stp
20:53:49.033967 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13455): Launched
20:53:49.352564 run   osmo-stp_10.42.42.5(pid=13456): Launched
20:53:49.467157 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
20:53:50.022337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13458): Launched
20:53:50.136020 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
20:53:50.414495 run              patchelf(pid=13459): Launched
20:53:50.601820 run   osmo-stp_10.42.42.5(pid=13456): ERR: Terminated: ERROR {rc=1}  [trial-2349↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13456)]
20:53:50.738272 run   osmo-stp_10.42.42.5(pid=13456): stdout: 
| (launched: 2022-12-08_20:53:49.195299)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:53:50.874745 run   osmo-stp_10.42.42.5(pid=13456): stderr: 
| �[0;m�[38;5;43m20221208205349387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208205349388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208205349388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208205349388 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:53:51.006433 run   osmo-stp_10.42.42.5(pid=13456): stdout: 
| (launched: 2022-12-08_20:53:49.195299)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
20:53:51.136751 run   osmo-stp_10.42.42.5(pid=13456): stderr: 
| �[0;m�[38;5;43m20221208205349387 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208205349388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208205349388 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208205349388 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208205349389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
20:53:51.289195 run              patchelf(pid=13459): Terminating (SIGINT)
20:53:51.468306 run              patchelf(pid=13459): Terminated: ok {rc=0}
20:53:51.501004 tst             ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=13456): Process ended prematurely: osmo-stp_10.42.42.5(pid=13456) [trial-2349↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13456)]  [trial-2349↪gprs:trx-lms↪ping_idle_ping.py:27]
20:53:51.510606 tst             ping_idle_ping.py:27: Test FAILED (6.7 sec)
20:53:51.573795 run   osmo-hlr_10.42.42.2(pid=13453): ERR: Terminated: ERROR {rc=237}  [trial-2349↪gprs:trx-lms↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13453)]
20:53:51.625280 run   osmo-hlr_10.42.42.2(pid=13453): stdout: 
| (launched: 2022-12-08_20:53:48.207500) 
20:53:51.677328 run   osmo-hlr_10.42.42.2(pid=13453): stderr: 
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221208205348404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221208205348416 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221208205348424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208205348425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208205348425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
20:53:51.721868 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13452): Terminating (SIGTERM)
20:53:51.763689 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13455): Terminating (SIGTERM)
20:53:51.806027 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13458): Terminating (SIGTERM)
20:53:51.815807 ---      ParallelTerminationStrategy: PID 13452 died...
20:53:51.871383 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13452): Terminated: ok {rc=0}
20:53:51.882052 ---      ParallelTerminationStrategy: PID 13455 died...
20:53:51.937403 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13455): Terminated: ok {rc=0}
20:53:51.947318 ---      ParallelTerminationStrategy: PID 13458 died...
20:53:52.002821 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13458): Terminated: ok {rc=0}
20:53:52.089087 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13456): Process ended prematurely: osmo-stp_10.42.42.5(pid=13456) [trial-2349↪gprs:trx-lms↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13456)]