Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24886): Process ended prematurely: osmo-stp_10.42.42.5(pid=24886) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24886)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 22:56:14.528883 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:14.540843 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:56:14.707015 tst iperf3.py: using LAC 17324 22:56:14.836536 tst iperf3.py: using RAC 239 22:56:14.960239 tst iperf3.py: using CellId 17324 22:56:15.088515 tst iperf3.py: using BVCI 17325 22:56:15.112092 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.123072 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.133897 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.144871 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.155981 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.167072 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.178187 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.188933 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:15.200205 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:56:15.491112 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:56:15.627712 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:56:16.003075 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24878): Launched 22:56:16.303704 run iperf3-srv_10.42.42.10(pid=24879): Launched 22:56:16.507967 tst iperf3.py:8: start network... 22:56:16.646882 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:56:17.207261 run create_hlr_db(pid=24880): Launched 22:56:17.395953 bus /gobi_6: Setting Powered False 22:56:18.408272 run create_hlr_db(pid=24880): Terminated: ok {rc=0} 22:56:18.848038 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24882): Launched 22:56:19.174901 run osmo-hlr_10.42.42.2(pid=24883): Launched 22:56:19.296390 run osmo-stp_10.42.42.5: Starting osmo-stp 22:56:19.864484 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24885): Launched 22:56:20.191031 run osmo-stp_10.42.42.5(pid=24886): Launched 22:56:20.309816 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:56:20.878720 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24888): Launched 22:56:20.995070 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:56:21.279674 run patchelf(pid=24889): Launched 22:56:21.470631 run osmo-stp_10.42.42.5(pid=24886): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24886)] 22:56:21.609998 run osmo-stp_10.42.42.5(pid=24886): stdout: | (launched: 2022-12-08_22:56:20.030839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:21.749528 run osmo-stp_10.42.42.5(pid=24886): stderr: | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225620224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:21.884719 run osmo-stp_10.42.42.5(pid=24886): stdout: | (launched: 2022-12-08_22:56:20.030839) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:22.018978 run osmo-stp_10.42.42.5(pid=24886): stderr: | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225620223 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225620224 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225620224 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:22.175375 run patchelf(pid=24889): Terminating (SIGINT) 22:56:22.358895 run patchelf(pid=24889): Terminated: ok {rc=0} 22:56:22.392370 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=24886): Process ended prematurely: osmo-stp_10.42.42.5(pid=24886) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24886)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8] 22:56:22.402374 tst iperf3.py:8: Test FAILED (7.9 sec) 22:56:22.466610 run osmo-hlr_10.42.42.2(pid=24883): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24883)] 22:56:22.519044 run osmo-hlr_10.42.42.2(pid=24883): stdout: | (launched: 2022-12-08_22:56:19.014874) 22:56:22.572184 run osmo-hlr_10.42.42.2(pid=24883): stderr: | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225619212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225619225 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225619233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225619233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225619233 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:56:22.617246 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24878): Terminating (SIGTERM) 22:56:22.659678 run iperf3-srv_10.42.42.10(pid=24879): Terminating (SIGTERM) 22:56:22.702175 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24882): Terminating (SIGTERM) 22:56:22.744675 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24885): Terminating (SIGTERM) 22:56:22.787937 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24888): Terminating (SIGTERM) 22:56:22.797897 --- ParallelTerminationStrategy: PID 24878 died... 22:56:22.854827 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=24878): Terminated: ok {rc=0} 22:56:22.865113 --- ParallelTerminationStrategy: PID 24879 died... 22:56:22.921666 run iperf3-srv_10.42.42.10(pid=24879): Terminated {rc=256} 22:56:22.931923 --- ParallelTerminationStrategy: PID 24882 died... 22:56:22.989085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24882): Terminated: ok {rc=0} 22:56:22.999352 --- ParallelTerminationStrategy: PID 24885 died... 22:56:23.056000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24885): Terminated: ok {rc=0} 22:56:23.066291 --- ParallelTerminationStrategy: PID 24888 died... 22:56:23.123360 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24888): Terminated: ok {rc=0} 22:56:23.211208 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24886): Process ended prematurely: osmo-stp_10.42.42.5(pid=24886) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24886)]