Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.ping.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=24915): Process ended prematurely: osmo-stp_10.42.42.5(pid=24915) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24915)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-dynts-ipa ping.py ---------------------------------------------- 22:56:44.322858 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.334852 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:56:44.495329 tst ping.py: using LAC 17326 22:56:44.622921 tst ping.py: using RAC 241 22:56:44.746106 tst ping.py: using CellId 17326 22:56:44.866620 tst ping.py: using BVCI 17327 22:56:44.889709 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.900636 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.911617 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.922702 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.933434 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.945393 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.956993 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:56:44.968197 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:56:45.245469 tst ping.py:19: start network... 22:56:45.370747 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:56:45.843013 run create_hlr_db(pid=24909): Launched 22:56:46.019069 bus /gobi_6: Setting Powered False 22:56:47.052750 run create_hlr_db(pid=24909): Terminated: ok {rc=0} 22:56:47.485809 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24911): Launched 22:56:47.806802 run osmo-hlr_10.42.42.2(pid=24912): Launched 22:56:47.924456 run osmo-stp_10.42.42.5: Starting osmo-stp 22:56:48.482772 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24914): Launched 22:56:48.802080 run osmo-stp_10.42.42.5(pid=24915): Launched 22:56:48.918752 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:56:49.480870 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24917): Launched 22:56:49.595919 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:56:49.875813 run patchelf(pid=24918): Launched 22:56:50.064390 run osmo-stp_10.42.42.5(pid=24915): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24915)] 22:56:50.202264 run osmo-stp_10.42.42.5(pid=24915): stdout: | (launched: 2022-12-08_22:56:48.645424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:50.339756 run osmo-stp_10.42.42.5(pid=24915): stderr: | �[0;m�[38;5;43m20221208225648837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225648837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225648838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225648838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:50.472615 run osmo-stp_10.42.42.5(pid=24915): stdout: | (launched: 2022-12-08_22:56:48.645424) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:56:50.604374 run osmo-stp_10.42.42.5(pid=24915): stderr: | �[0;m�[38;5;43m20221208225648837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225648837 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225648838 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225648838 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225648839 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:56:50.758022 run patchelf(pid=24918): Terminating (SIGINT) 22:56:50.938406 run patchelf(pid=24918): Terminated: ok {rc=0} 22:56:50.971102 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24915): Process ended prematurely: osmo-stp_10.42.42.5(pid=24915) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24915)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22] 22:56:50.980206 tst ping.py:22: Test FAILED (6.6 sec) 22:56:51.044781 run osmo-hlr_10.42.42.2(pid=24912): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24912)] 22:56:51.097507 run osmo-hlr_10.42.42.2(pid=24912): stdout: | (launched: 2022-12-08_22:56:47.650252) 22:56:51.150507 run osmo-hlr_10.42.42.2(pid=24912): stderr: | �[0;m�[1;31m20221208225647850 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225647850 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225647850 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225647850 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225647850 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225647851 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225647864 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-dynts-ipa/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225647872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225647872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225647872 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:56:51.195399 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24911): Terminating (SIGTERM) 22:56:51.237929 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24914): Terminating (SIGTERM) 22:56:51.280366 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24917): Terminating (SIGTERM) 22:56:51.290314 --- ParallelTerminationStrategy: PID 24911 died... 22:56:51.347341 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24911): Terminated: ok {rc=0} 22:56:51.357756 --- ParallelTerminationStrategy: PID 24914 died... 22:56:51.414456 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24914): Terminated: ok {rc=0} 22:56:51.424807 --- ParallelTerminationStrategy: PID 24917 died... 22:56:51.481314 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24917): Terminated: ok {rc=0} 22:56:51.569357 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24915): Process ended prematurely: osmo-stp_10.42.42.5(pid=24915) [trial-2350↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24915)]