Failed
gprs:nanobts+band-900+mod-bts0-egprs.ping.py (from gprs_nanobts+band-900+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=24847): Process ended prematurely: osmo-stp_10.42.42.5(pid=24847) [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24847)]
Standard Output
---------------------------------------------- trial-2350 gprs:nanobts+band-900+mod-bts0-egprs ping.py ---------------------------------------------- 22:55:43.409590 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:43.422115 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x bts (candidates: 1) 22:55:43.568361 tst ping.py: using LAC 17321 22:55:43.693329 tst ping.py: using RAC 236 22:55:43.817419 tst ping.py: using CellId 17321 22:55:43.941762 tst ping.py: using BVCI 17322 22:55:43.966471 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:43.977910 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:43.989334 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:44.000674 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:44.012023 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:44.023374 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:44.034984 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 22:55:44.046229 tst gprs:nanobts+band-900+mod-bts0-egprs: Using 1 x modem (candidates: 4) 22:55:44.335838 tst ping.py:19: start network... 22:55:44.469266 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:55:44.979446 run create_hlr_db(pid=24841): Launched 22:55:45.166594 bus /gobi_6: Setting Powered False 22:55:46.188780 run create_hlr_db(pid=24841): Terminated: ok {rc=0} 22:55:46.631173 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24843): Launched 22:55:47.062064 run osmo-hlr_10.42.42.2(pid=24844): Launched 22:55:47.217138 run osmo-stp_10.42.42.5: Starting osmo-stp 22:55:47.773059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24846): Launched 22:55:48.091508 run osmo-stp_10.42.42.5(pid=24847): Launched 22:55:48.207471 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:55:48.767099 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24849): Launched 22:55:48.881548 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:55:49.161054 run patchelf(pid=24850): Launched 22:55:49.349418 run osmo-stp_10.42.42.5(pid=24847): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24847)] 22:55:49.486690 run osmo-stp_10.42.42.5(pid=24847): stdout: | (launched: 2022-12-08_22:55:47.934986) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:55:49.624017 run osmo-stp_10.42.42.5(pid=24847): stderr: | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225548126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:55:49.756788 run osmo-stp_10.42.42.5(pid=24847): stdout: | (launched: 2022-12-08_22:55:47.934986) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:55:49.888326 run osmo-stp_10.42.42.5(pid=24847): stderr: | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208225548125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208225548126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208225548128 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:55:50.041638 run patchelf(pid=24850): Terminating (SIGINT) 22:55:50.222946 run patchelf(pid=24850): Terminated: ok {rc=0} 22:55:50.255553 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=24847): Process ended prematurely: osmo-stp_10.42.42.5(pid=24847) [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24847)] [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22] 22:55:50.264863 tst ping.py:22: Test FAILED (6.8 sec) 22:55:50.328393 run osmo-hlr_10.42.42.2(pid=24844): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=24844)] 22:55:50.380317 run osmo-hlr_10.42.42.2(pid=24844): stdout: | (launched: 2022-12-08_22:55:46.795905) 22:55:50.432623 run osmo-hlr_10.42.42.2(pid=24844): stderr: | �[0;m�[1;31m20221208225547009 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208225547010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208225547010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208225547010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208225547010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208225547010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208225547023 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:nanobts+band-900+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208225547038 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208225547042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208225547042 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:55:50.477691 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24843): Terminating (SIGTERM) 22:55:50.520351 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24846): Terminating (SIGTERM) 22:55:50.562866 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24849): Terminating (SIGTERM) 22:55:50.572768 --- ParallelTerminationStrategy: PID 24843 died... 22:55:50.629762 run pcap-recorder_any(filters='host 10.42.42.2')(pid=24843): Terminated: ok {rc=0} 22:55:50.640148 --- ParallelTerminationStrategy: PID 24846 died... 22:55:50.696678 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=24846): Terminated: ok {rc=0} 22:55:50.707112 --- ParallelTerminationStrategy: PID 24849 died... 22:55:50.764113 run pcap-recorder_any(filters='host 10.42.42.6')(pid=24849): Terminated: ok {rc=0} 22:55:50.851320 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=24847): Process ended prematurely: osmo-stp_10.42.42.5(pid=24847) [trial-2350↪gprs:nanobts+band-900+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=24847)]