Failed
gprs:oc2g+mod-bts0-dynts-ipa.iperf3.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=18830): Process ended prematurely: osmo-stp_10.42.42.5(pid=18830) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18830)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 22:00:21.053713 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.065219 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 22:00:21.211389 tst iperf3.py: using LAC 17027 22:00:21.332111 tst iperf3.py: using RAC 197 22:00:21.458694 tst iperf3.py: using CellId 17027 22:00:21.588247 tst iperf3.py: using BVCI 17028 22:00:21.613412 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.624649 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.635782 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.646968 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.657878 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.669132 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.680251 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.691359 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 22:00:21.702626 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 22:00:21.977473 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:00:22.103290 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:00:22.413187 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18822): Launched 22:00:22.671170 run iperf3-srv_10.42.42.10(pid=18823): Launched 22:00:22.854450 tst iperf3.py:8: start network... 22:00:22.979846 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:00:23.450356 run create_hlr_db(pid=18824): Launched 22:00:23.622848 bus /gobi_6: Setting Powered False 22:00:24.644684 run create_hlr_db(pid=18824): Terminated: ok {rc=0} 22:00:25.068729 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18826): Launched 22:00:25.387419 run osmo-hlr_10.42.42.2(pid=18827): Launched 22:00:25.509519 run osmo-stp_10.42.42.5: Starting osmo-stp 22:00:26.065427 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18829): Launched 22:00:26.384734 run osmo-stp_10.42.42.5(pid=18830): Launched 22:00:26.501508 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:00:27.059283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18832): Launched 22:00:27.173647 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:00:27.452472 run patchelf(pid=18833): Launched 22:00:27.640656 run osmo-stp_10.42.42.5(pid=18830): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18830)] 22:00:27.778130 run osmo-stp_10.42.42.5(pid=18830): stdout: | (launched: 2022-12-08_22:00:26.229372) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:27.915883 run osmo-stp_10.42.42.5(pid=18830): stderr: | �[0;m�[38;5;43m20221208220026420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220026420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220026421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220026421 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220026421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220026421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220026422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:28.049388 run osmo-stp_10.42.42.5(pid=18830): stdout: | (launched: 2022-12-08_22:00:26.229372) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:00:28.182637 run osmo-stp_10.42.42.5(pid=18830): stderr: | �[0;m�[38;5;43m20221208220026420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220026420 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220026421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220026421 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220026421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220026421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220026422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:00:28.336492 run patchelf(pid=18833): Terminating (SIGINT) 22:00:28.517581 run patchelf(pid=18833): Terminated: ok {rc=0} 22:00:28.550796 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18830): Process ended prematurely: osmo-stp_10.42.42.5(pid=18830) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18830)] [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8] 22:00:28.560655 tst iperf3.py:8: Test FAILED (7.5 sec) 22:00:28.624271 run osmo-hlr_10.42.42.2(pid=18827): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18827)] 22:00:28.676520 run osmo-hlr_10.42.42.2(pid=18827): stdout: | (launched: 2022-12-08_22:00:25.231729) 22:00:28.729448 run osmo-hlr_10.42.42.2(pid=18827): stderr: | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220025429 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220025441 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220025449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220025449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220025449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:00:28.774465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18822): Terminating (SIGTERM) 22:00:28.816768 run iperf3-srv_10.42.42.10(pid=18823): Terminating (SIGTERM) 22:00:28.859363 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18826): Terminating (SIGTERM) 22:00:28.901917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18829): Terminating (SIGTERM) 22:00:28.944333 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18832): Terminating (SIGTERM) 22:00:28.954134 --- ParallelTerminationStrategy: PID 18822 died... 22:00:29.011025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18822): Terminated: ok {rc=0} 22:00:29.021260 --- ParallelTerminationStrategy: PID 18823 died... 22:00:29.077941 run iperf3-srv_10.42.42.10(pid=18823): Terminated {rc=256} 22:00:29.087906 --- ParallelTerminationStrategy: PID 18826 died... 22:00:29.144265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18826): Terminated: ok {rc=0} 22:00:29.154469 --- ParallelTerminationStrategy: PID 18829 died... 22:00:29.210743 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18829): Terminated: ok {rc=0} 22:00:29.221031 --- ParallelTerminationStrategy: PID 18832 died... 22:00:29.277437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18832): Terminated: ok {rc=0} 22:00:29.365697 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18830): Process ended prematurely: osmo-stp_10.42.42.5(pid=18830) [trial-2350↪gprs:oc2g+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18830)]