Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=18899): Process ended prematurely: osmo-stp_10.42.42.5(pid=18899) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18899)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 22:01:20.983564 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:20.994901 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:01:21.149130 tst iperf3.py: using LAC 17032 22:01:21.275421 tst iperf3.py: using RAC 202 22:01:21.402901 tst iperf3.py: using CellId 17032 22:01:21.531107 tst iperf3.py: using BVCI 17033 22:01:21.555889 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.567308 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.578302 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.589376 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.600272 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.611328 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.622435 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.633359 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:01:21.644439 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:01:21.919800 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:01:22.045265 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:01:22.355782 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18891): Launched 22:01:22.615979 run iperf3-srv_10.42.42.10(pid=18892): Launched 22:01:22.799305 tst iperf3.py:8: start network... 22:01:22.924462 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:01:23.398868 run create_hlr_db(pid=18893): Launched 22:01:23.573488 bus /gobi_6: Setting Powered False 22:01:24.595827 run create_hlr_db(pid=18893): Terminated: ok {rc=0} 22:01:24.996805 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18895): Launched 22:01:25.298371 run osmo-hlr_10.42.42.2(pid=18896): Launched 22:01:25.413399 run osmo-stp_10.42.42.5: Starting osmo-stp 22:01:25.935597 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18898): Launched 22:01:26.234043 run osmo-stp_10.42.42.5(pid=18899): Launched 22:01:26.343212 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:01:26.866869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18901): Launched 22:01:26.974483 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:01:27.237114 run patchelf(pid=18902): Launched 22:01:27.413861 run osmo-stp_10.42.42.5(pid=18899): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18899)] 22:01:27.543600 run osmo-stp_10.42.42.5(pid=18899): stdout: | (launched: 2022-12-08_22:01:26.088043) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:27.673491 run osmo-stp_10.42.42.5(pid=18899): stderr: | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220126259 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:27.799607 run osmo-stp_10.42.42.5(pid=18899): stdout: | (launched: 2022-12-08_22:01:26.088043) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:01:27.924443 run osmo-stp_10.42.42.5(pid=18899): stderr: | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208220126258 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208220126259 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208220126259 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:01:28.069532 run patchelf(pid=18902): Terminating (SIGINT) 22:01:28.239612 run patchelf(pid=18902): Terminated: ok {rc=0} 22:01:28.271003 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18899): Process ended prematurely: osmo-stp_10.42.42.5(pid=18899) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18899)] [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 22:01:28.280213 tst iperf3.py:8: Test FAILED (7.3 sec) 22:01:28.341781 run osmo-hlr_10.42.42.2(pid=18896): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18896)] 22:01:28.391982 run osmo-hlr_10.42.42.2(pid=18896): stdout: | (launched: 2022-12-08_22:01:25.150211) 22:01:28.442949 run osmo-hlr_10.42.42.2(pid=18896): stderr: | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208220125327 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208220125339 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208220125348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208220125348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208220125348 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:01:28.485891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18891): Terminating (SIGTERM) 22:01:28.526655 run iperf3-srv_10.42.42.10(pid=18892): Terminating (SIGTERM) 22:01:28.567356 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18895): Terminating (SIGTERM) 22:01:28.608025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18898): Terminating (SIGTERM) 22:01:28.648920 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18901): Terminating (SIGTERM) 22:01:28.658588 --- ParallelTerminationStrategy: PID 18891 died... 22:01:28.712897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18891): Terminated: ok {rc=0} 22:01:28.722894 --- ParallelTerminationStrategy: PID 18892 died... 22:01:28.777269 run iperf3-srv_10.42.42.10(pid=18892): Terminated {rc=256} 22:01:28.787126 --- ParallelTerminationStrategy: PID 18895 died... 22:01:28.841096 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18895): Terminated: ok {rc=0} 22:01:28.850911 --- ParallelTerminationStrategy: PID 18898 died... 22:01:28.904749 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18898): Terminated: ok {rc=0} 22:01:28.914617 --- ParallelTerminationStrategy: PID 18901 died... 22:01:28.968706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18901): Terminated: ok {rc=0} 22:01:29.056835 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18899): Process ended prematurely: osmo-stp_10.42.42.5(pid=18899) [trial-2350↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18899)]