Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=19821): Process ended prematurely: osmo-stp_10.42.42.5(pid=19821) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19821)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-b200+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 22:10:34.709620 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:34.722052 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 22:10:34.895785 tst ping_idle_ping.py: using LAC 17081 22:10:35.024144 tst ping_idle_ping.py: using RAC 251 22:10:35.153966 tst ping_idle_ping.py: using CellId 17081 22:10:35.277151 tst ping_idle_ping.py: using BVCI 17082 22:10:35.301731 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.313144 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.324200 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.336013 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.347289 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.358612 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.369810 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 22:10:35.380768 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 22:10:35.653890 tst ping_idle_ping.py:24: start network... 22:10:35.778107 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:10:36.250727 run create_hlr_db(pid=19815): Launched 22:10:36.424070 bus /gobi_6: Setting Powered False 22:10:37.445016 run create_hlr_db(pid=19815): Terminated: ok {rc=0} 22:10:37.868899 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19817): Launched 22:10:38.185902 run osmo-hlr_10.42.42.2(pid=19818): Launched 22:10:38.302851 run osmo-stp_10.42.42.5: Starting osmo-stp 22:10:38.855405 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19820): Launched 22:10:39.174228 run osmo-stp_10.42.42.5(pid=19821): Launched 22:10:39.289662 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:10:39.846138 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19823): Launched 22:10:39.959988 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:10:40.237089 run patchelf(pid=19824): Launched 22:10:40.424763 run osmo-stp_10.42.42.5(pid=19821): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19821)] 22:10:40.561791 run osmo-stp_10.42.42.5(pid=19821): stdout: | (launched: 2022-12-08_22:10:39.018362) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:40.699495 run osmo-stp_10.42.42.5(pid=19821): stderr: | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221039213 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:40.832478 run osmo-stp_10.42.42.5(pid=19821): stdout: | (launched: 2022-12-08_22:10:39.018362) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:10:40.963880 run osmo-stp_10.42.42.5(pid=19821): stderr: | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208221039212 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208221039213 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208221039213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:10:41.117859 run patchelf(pid=19824): Terminating (SIGINT) 22:10:41.296884 run patchelf(pid=19824): Terminated: ok {rc=0} 22:10:41.329792 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=19821): Process ended prematurely: osmo-stp_10.42.42.5(pid=19821) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19821)] [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 22:10:41.339054 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 22:10:41.402599 run osmo-hlr_10.42.42.2(pid=19818): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19818)] 22:10:41.454446 run osmo-hlr_10.42.42.2(pid=19818): stdout: | (launched: 2022-12-08_22:10:38.030970) 22:10:41.506961 run osmo-hlr_10.42.42.2(pid=19818): stderr: | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208221038231 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208221038244 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-b200+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208221038254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208221038254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208221038254 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:10:41.551822 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19817): Terminating (SIGTERM) 22:10:41.594251 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19820): Terminating (SIGTERM) 22:10:41.636619 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19823): Terminating (SIGTERM) 22:10:41.646424 --- ParallelTerminationStrategy: PID 19817 died... 22:10:41.703396 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19817): Terminated: ok {rc=0} 22:10:41.713757 --- ParallelTerminationStrategy: PID 19820 died... 22:10:41.770396 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19820): Terminated: ok {rc=0} 22:10:41.780571 --- ParallelTerminationStrategy: PID 19823 died... 22:10:41.837185 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19823): Terminated: ok {rc=0} 22:10:41.952029 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19821): Process ended prematurely: osmo-stp_10.42.42.5(pid=19821) [trial-2350↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19821)]