Failed
gprs:nanobts+band-900+mod-bts0-dynts-ipa.iperf3.py (from gprs_nanobts+band-900+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=1057): Process ended prematurely: osmo-stp_10.42.42.5(pid=1057) [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1057)]
Standard Output
---------------------------------------------- trial-2351 gprs:nanobts+band-900+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 00:23:28.530114 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:28.541506 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:23:28.696407 tst iperf3.py: using LAC 17785 00:23:28.828324 tst iperf3.py: using RAC 190 00:23:28.968793 tst iperf3.py: using CellId 17785 00:23:29.095994 tst iperf3.py: using BVCI 17786 00:23:29.121179 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.132714 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.144072 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.155989 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.168024 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.179980 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.191702 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.203488 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:23:29.215413 tst gprs:nanobts+band-900+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:23:29.494975 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:23:29.621724 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:23:29.939578 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1049): Launched 00:23:30.203938 run iperf3-srv_10.42.42.10(pid=1050): Launched 00:23:30.391218 tst iperf3.py:8: start network... 00:23:30.518004 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:23:31.031171 run create_hlr_db(pid=1051): Launched 00:23:31.231920 bus /gobi_6: Setting Powered False 00:23:32.279233 run create_hlr_db(pid=1051): Terminated: ok {rc=0} 00:23:32.690293 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1053): Launched 00:23:32.995694 run osmo-hlr_10.42.42.2(pid=1054): Launched 00:23:33.113419 run osmo-stp_10.42.42.5: Starting osmo-stp 00:23:33.642875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1056): Launched 00:23:33.947175 run osmo-stp_10.42.42.5(pid=1057): Launched 00:23:34.057953 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:23:34.589675 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1059): Launched 00:23:34.698131 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:23:34.963818 run patchelf(pid=1060): Launched 00:23:35.141892 run osmo-stp_10.42.42.5(pid=1057): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1057)] 00:23:35.272147 run osmo-stp_10.42.42.5(pid=1057): stdout: | (launched: 2022-12-09_00:23:33.797441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:23:35.403050 run osmo-stp_10.42.42.5(pid=1057): stderr: | �[0;m�[38;5;43m20221209002333967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002333967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002333968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002333968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:23:35.528869 run osmo-stp_10.42.42.5(pid=1057): stdout: | (launched: 2022-12-09_00:23:33.797441) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:23:35.653686 run osmo-stp_10.42.42.5(pid=1057): stderr: | �[0;m�[38;5;43m20221209002333967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209002333967 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209002333968 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209002333968 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209002333970 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:23:35.798483 run patchelf(pid=1060): Terminating (SIGINT) 00:23:35.969229 run patchelf(pid=1060): Terminated: ok {rc=0} 00:23:36.000432 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=1057): Process ended prematurely: osmo-stp_10.42.42.5(pid=1057) [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1057)] [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8] 00:23:36.009622 tst iperf3.py:8: Test FAILED (7.5 sec) 00:23:36.068343 run osmo-hlr_10.42.42.2(pid=1054): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1054)] 00:23:36.116263 run osmo-hlr_10.42.42.2(pid=1054): stdout: | (launched: 2022-12-09_00:23:32.845765) 00:23:36.164905 run osmo-hlr_10.42.42.2(pid=1054): stderr: | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209002333025 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209002333037 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-900+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209002333046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209002333046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209002333046 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:23:36.206375 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1049): Terminating (SIGTERM) 00:23:36.245161 run iperf3-srv_10.42.42.10(pid=1050): Terminating (SIGTERM) 00:23:36.283886 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1053): Terminating (SIGTERM) 00:23:36.323171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1056): Terminating (SIGTERM) 00:23:36.361772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1059): Terminating (SIGTERM) 00:23:36.370807 --- ParallelTerminationStrategy: PID 1049 died... 00:23:36.423104 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1049): Terminated: ok {rc=0} 00:23:36.432622 --- ParallelTerminationStrategy: PID 1050 died... 00:23:36.484657 run iperf3-srv_10.42.42.10(pid=1050): Terminated {rc=256} 00:23:36.494023 --- ParallelTerminationStrategy: PID 1053 died... 00:23:36.545698 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1053): Terminated: ok {rc=0} 00:23:36.555071 --- ParallelTerminationStrategy: PID 1056 died... 00:23:36.606524 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1056): Terminated: ok {rc=0} 00:23:36.615909 --- ParallelTerminationStrategy: PID 1059 died... 00:23:36.667789 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1059): Terminated: ok {rc=0} 00:23:36.755413 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1057): Process ended prematurely: osmo-stp_10.42.42.5(pid=1057) [trial-2351↪gprs:nanobts+band-900+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1057)]