Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:nanobts+band-900.ping.py (from gprs_nanobts+band-900)

Failing for the past 26 builds (Since #2326 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=647): Process ended prematurely: osmo-stp_10.42.42.5(pid=647) [trial-2351↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=647)]

Standard Output

----------------------------------------------
trial-2351 gprs:nanobts+band-900 ping.py
----------------------------------------------
00:21:55.652630 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:55.663779 tst            gprs:nanobts+band-900: Using 1 x bts (candidates: 1)
00:21:55.799099 tst                          ping.py: using LAC 17777
00:21:55.918714 tst                          ping.py: using RAC 182
00:21:56.036540 tst                          ping.py: using CellId 17777
00:21:56.154363 tst                          ping.py: using BVCI 17778
00:21:56.177325 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.187843 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.198270 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.208699 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.219125 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.229411 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.239854 tst            gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9)
00:21:56.250189 tst            gprs:nanobts+band-900: Using 1 x modem (candidates: 4)
00:21:56.522240 tst                       ping.py:19: start network...
00:21:56.646342 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
00:21:57.124406 run           create_hlr_db(pid=641): Launched
00:21:57.296875 bus                          /gobi_6: Setting Powered False
00:21:58.317238 run           create_hlr_db(pid=641): Terminated: ok {rc=0}
00:21:58.740271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=643): Launched
00:21:59.038137 run     osmo-hlr_10.42.42.2(pid=644): Launched
00:21:59.146954 run              osmo-stp_10.42.42.5: Starting osmo-stp
00:21:59.670983 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=646): Launched
00:21:59.969285 run     osmo-stp_10.42.42.5(pid=647): Launched
00:22:00.077106 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
00:22:00.599943 run pcap-recorder_any(filters='host 10.42.42.6')(pid=649): Launched
00:22:00.706262 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
00:22:00.999312 run                patchelf(pid=650): Launched
00:22:01.177670 run     osmo-stp_10.42.42.5(pid=647): ERR: Terminated: ERROR {rc=1}  [trial-2351↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=647)]
00:22:01.308544 run     osmo-stp_10.42.42.5(pid=647): stdout: 
| (launched: 2022-12-09_00:21:59.822939)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:22:01.439880 run     osmo-stp_10.42.42.5(pid=647): stderr: 
| �[0;m�[38;5;43m20221209002159993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209002159993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209002159994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209002159994 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:22:01.567794 run     osmo-stp_10.42.42.5(pid=647): stdout: 
| (launched: 2022-12-09_00:21:59.822939)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
00:22:01.693583 run     osmo-stp_10.42.42.5(pid=647): stderr: 
| �[0;m�[38;5;43m20221209002159993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209002159993 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209002159994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209002159994 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209002159995 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
00:22:01.839036 run                patchelf(pid=650): Terminating (SIGINT)
00:22:02.010518 run                patchelf(pid=650): Terminated: ok {rc=0}
00:22:02.041858 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=647): Process ended prematurely: osmo-stp_10.42.42.5(pid=647) [trial-2351↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=647)]  [trial-2351↪gprs:nanobts+band-900↪ping.py:22]
00:22:02.051525 tst                       ping.py:22: Test FAILED (6.4 sec)
00:22:02.111419 run     osmo-hlr_10.42.42.2(pid=644): ERR: Terminated: ERROR {rc=237}  [trial-2351↪gprs:nanobts+band-900↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=644)]
00:22:02.160115 run     osmo-hlr_10.42.42.2(pid=644): stdout: 
| (launched: 2022-12-09_00:21:58.892328) 
00:22:02.209438 run     osmo-hlr_10.42.42.2(pid=644): stderr: 
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209002159067 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209002159083 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:nanobts+band-900/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209002159092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209002159093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209002159093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
00:22:02.250803 run pcap-recorder_any(filters='host 10.42.42.2')(pid=643): Terminating (SIGTERM)
00:22:02.289762 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=646): Terminating (SIGTERM)
00:22:02.328827 run pcap-recorder_any(filters='host 10.42.42.6')(pid=649): Terminating (SIGTERM)
00:22:02.338082 ---      ParallelTerminationStrategy: PID 643 died...
00:22:02.390592 run pcap-recorder_any(filters='host 10.42.42.2')(pid=643): Terminated: ok {rc=0}
00:22:02.400229 ---      ParallelTerminationStrategy: PID 646 died...
00:22:02.452651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=646): Terminated: ok {rc=0}
00:22:02.462279 ---      ParallelTerminationStrategy: PID 649 died...
00:22:02.514784 run pcap-recorder_any(filters='host 10.42.42.6')(pid=649): Terminated: ok {rc=0}
00:22:02.597906 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=647): Process ended prematurely: osmo-stp_10.42.42.5(pid=647) [trial-2351↪gprs:nanobts+band-900↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=647)]