Failed
gprs:oc2g+mod-bts0-dynts-osmo.iperf3.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27975): Process ended prematurely: osmo-stp_10.42.42.5(pid=27975) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27975)]
Standard Output
---------------------------------------------- trial-2351 gprs:oc2g+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 23:28:45.186526 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.199437 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:28:45.351157 tst iperf3.py: using LAC 17493 23:28:45.467164 tst iperf3.py: using RAC 153 23:28:45.585383 tst iperf3.py: using CellId 17493 23:28:45.714207 tst iperf3.py: using BVCI 17494 23:28:45.738794 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.750215 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.761301 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.773060 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.784550 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.795649 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.807648 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.819140 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:28:45.831141 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:28:46.153396 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:28:46.285943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:28:46.620940 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27967): Launched 23:28:46.905873 run iperf3-srv_10.42.42.10(pid=27968): Launched 23:28:47.094834 tst iperf3.py:8: start network... 23:28:47.226316 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:28:47.703976 run create_hlr_db(pid=27969): Launched 23:28:47.878185 bus /gobi_6: Setting Powered False 23:28:48.898698 run create_hlr_db(pid=27969): Terminated: ok {rc=0} 23:28:49.325039 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27971): Launched 23:28:49.645836 run osmo-hlr_10.42.42.2(pid=27972): Launched 23:28:49.763307 run osmo-stp_10.42.42.5: Starting osmo-stp 23:28:50.320392 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27974): Launched 23:28:50.640491 run osmo-stp_10.42.42.5(pid=27975): Launched 23:28:50.757021 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:28:51.316573 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27977): Launched 23:28:51.430883 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:28:51.709257 run patchelf(pid=27978): Launched 23:28:51.896805 run osmo-stp_10.42.42.5(pid=27975): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27975)] 23:28:52.034896 run osmo-stp_10.42.42.5(pid=27975): stdout: | (launched: 2022-12-08_23:28:50.482851) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:52.173126 run osmo-stp_10.42.42.5(pid=27975): stderr: | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232850676 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:52.306390 run osmo-stp_10.42.42.5(pid=27975): stdout: | (launched: 2022-12-08_23:28:50.482851) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:28:52.437571 run osmo-stp_10.42.42.5(pid=27975): stderr: | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232850675 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232850676 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232850676 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:28:52.590593 run patchelf(pid=27978): Terminating (SIGINT) 23:28:52.770546 run patchelf(pid=27978): Terminated: ok {rc=0} 23:28:52.805174 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=27975): Process ended prematurely: osmo-stp_10.42.42.5(pid=27975) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27975)] [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8] 23:28:52.815040 tst iperf3.py:8: Test FAILED (7.7 sec) 23:28:52.876421 run osmo-hlr_10.42.42.2(pid=27972): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27972)] 23:28:52.926840 run osmo-hlr_10.42.42.2(pid=27972): stdout: | (launched: 2022-12-08_23:28:49.488667) 23:28:52.978026 run osmo-hlr_10.42.42.2(pid=27972): stderr: | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208232849687 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208232849700 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:oc2g+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208232849708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208232849708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208232849708 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:28:53.022049 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27967): Terminating (SIGTERM) 23:28:53.063112 run iperf3-srv_10.42.42.10(pid=27968): Terminating (SIGTERM) 23:28:53.104382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27971): Terminating (SIGTERM) 23:28:53.145554 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27974): Terminating (SIGTERM) 23:28:53.186700 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27977): Terminating (SIGTERM) 23:28:53.196152 --- ParallelTerminationStrategy: PID 27967 died... 23:28:53.251032 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27967): Terminated: ok {rc=0} 23:28:53.260990 --- ParallelTerminationStrategy: PID 27968 died... 23:28:53.315149 run iperf3-srv_10.42.42.10(pid=27968): Terminated {rc=256} 23:28:53.325051 --- ParallelTerminationStrategy: PID 27971 died... 23:28:53.379790 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27971): Terminated: ok {rc=0} 23:28:53.389865 --- ParallelTerminationStrategy: PID 27974 died... 23:28:53.444532 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27974): Terminated: ok {rc=0} 23:28:53.454584 --- ParallelTerminationStrategy: PID 27977 died... 23:28:53.509037 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27977): Terminated: ok {rc=0} 23:28:53.593611 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27975): Process ended prematurely: osmo-stp_10.42.42.5(pid=27975) [trial-2351↪gprs:oc2g+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27975)]