Failed
gprs:trx-b200+mod-bts0-egprs.ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=29002): Process ended prematurely: osmo-stp_10.42.42.5(pid=29002) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29002)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200+mod-bts0-egprs ping.py ---------------------------------------------- 23:35:46.259990 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.272868 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:35:46.412801 tst ping.py: using LAC 17531 23:35:46.569372 tst ping.py: using RAC 191 23:35:46.699070 tst ping.py: using CellId 17531 23:35:46.819777 tst ping.py: using BVCI 17532 23:35:46.844627 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.856401 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.868531 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.880272 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.892540 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.906075 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.919035 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:35:46.930645 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:35:47.212596 tst ping.py:19: start network... 23:35:47.336849 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:35:47.818979 run create_hlr_db(pid=28996): Launched 23:35:48.003166 bus /gobi_6: Setting Powered False 23:35:49.023014 run create_hlr_db(pid=28996): Terminated: ok {rc=0} 23:35:49.444858 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28998): Launched 23:35:49.761683 run osmo-hlr_10.42.42.2(pid=28999): Launched 23:35:49.880919 run osmo-stp_10.42.42.5: Starting osmo-stp 23:35:50.433921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29001): Launched 23:35:50.748274 run osmo-stp_10.42.42.5(pid=29002): Launched 23:35:50.861819 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:35:51.413859 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29004): Launched 23:35:51.526541 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:35:51.802848 run patchelf(pid=29005): Launched 23:35:51.988337 run osmo-stp_10.42.42.5(pid=29002): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29002)] 23:35:52.123963 run osmo-stp_10.42.42.5(pid=29002): stdout: | (launched: 2022-12-08_23:35:50.594629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:52.260242 run osmo-stp_10.42.42.5(pid=29002): stderr: | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233550787 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:52.391541 run osmo-stp_10.42.42.5(pid=29002): stdout: | (launched: 2022-12-08_23:35:50.594629) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:52.520837 run osmo-stp_10.42.42.5(pid=29002): stderr: | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233550786 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233550787 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233550787 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:52.671797 run patchelf(pid=29005): Terminating (SIGINT) 23:35:52.848690 run patchelf(pid=29005): Terminated: ok {rc=0} 23:35:52.881050 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=29002): Process ended prematurely: osmo-stp_10.42.42.5(pid=29002) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29002)] [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22] 23:35:52.890291 tst ping.py:22: Test FAILED (6.6 sec) 23:35:52.952153 run osmo-hlr_10.42.42.2(pid=28999): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28999)] 23:35:53.002855 run osmo-hlr_10.42.42.2(pid=28999): stdout: | (launched: 2022-12-08_23:35:49.606422) 23:35:53.053992 run osmo-hlr_10.42.42.2(pid=28999): stderr: | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233549805 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233549818 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200+mod-bts0-egprs/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233549827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233549827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233549827 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:35:53.097846 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28998): Terminating (SIGTERM) 23:35:53.138797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29001): Terminating (SIGTERM) 23:35:53.180475 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29004): Terminating (SIGTERM) 23:35:53.190168 --- ParallelTerminationStrategy: PID 28998 died... 23:35:53.245832 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28998): Terminated: ok {rc=0} 23:35:53.255831 --- ParallelTerminationStrategy: PID 29001 died... 23:35:53.311010 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29001): Terminated: ok {rc=0} 23:35:53.321121 --- ParallelTerminationStrategy: PID 29004 died... 23:35:53.376690 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29004): Terminated: ok {rc=0} 23:35:53.463101 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29002): Process ended prematurely: osmo-stp_10.42.42.5(pid=29002) [trial-2351↪gprs:trx-b200+mod-bts0-egprs↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29002)]