Skip to content

Failed

gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)

Failing for the past 213 builds (Since #2139 )
Took 8 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=29455): Process ended prematurely: osmo-stp_10.42.42.5(pid=29455) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29455)]

Standard Output

----------------------------------------------
trial-2351 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py
----------------------------------------------
23:38:17.525044 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:17.537888 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1)
23:38:17.688873 tst                        iperf3.py: using LAC 17544
23:38:17.812023 tst                        iperf3.py: using RAC 204
23:38:17.936323 tst                        iperf3.py: using CellId 17544
23:38:18.061391 tst                        iperf3.py: using BVCI 17545
23:38:18.085777 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.098312 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.111140 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.124565 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.136568 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.149640 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.164237 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.176116 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9)
23:38:18.190218 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4)
23:38:18.479967 tst                      iperf3.py:8: start iperfv3 server 10.42.42.10:5003...
23:38:18.613095 run           iperf3-srv_10.42.42.10: Starting iperf3-srv
23:38:18.959992 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29447): Launched
23:38:19.250400 run iperf3-srv_10.42.42.10(pid=29448): Launched
23:38:19.443487 tst                      iperf3.py:8: start network...
23:38:19.575851 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
23:38:20.119779 run         create_hlr_db(pid=29449): Launched
23:38:20.301491 bus                          /gobi_6: Setting Powered False
23:38:21.322013 run         create_hlr_db(pid=29449): Terminated: ok {rc=0}
23:38:21.770847 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29451): Launched
23:38:22.205618 run   osmo-hlr_10.42.42.2(pid=29452): Launched
23:38:22.367503 run              osmo-stp_10.42.42.5: Starting osmo-stp
23:38:22.993124 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29454): Launched
23:38:23.388623 run   osmo-stp_10.42.42.5(pid=29455): Launched
23:38:23.506255 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
23:38:24.039738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29458): Launched
23:38:24.147801 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
23:38:24.411424 run              patchelf(pid=29459): Launched
23:38:24.588350 run   osmo-stp_10.42.42.5(pid=29455): ERR: Terminated: ERROR {rc=1}  [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29455)]
23:38:24.718316 run   osmo-stp_10.42.42.5(pid=29455): stdout: 
| (launched: 2022-12-08_23:38:23.152365)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:24.849106 run   osmo-stp_10.42.42.5(pid=29455): stderr: 
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208233823422 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:24.974625 run   osmo-stp_10.42.42.5(pid=29455): stdout: 
| (launched: 2022-12-08_23:38:23.152365)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
23:38:25.098819 run   osmo-stp_10.42.42.5(pid=29455): stderr: 
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221208233823421 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221208233823422 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221208233823422 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
23:38:25.243358 run              patchelf(pid=29459): Terminating (SIGINT)
23:38:25.412868 run              patchelf(pid=29459): Terminated: ok {rc=0}
23:38:25.444160 tst                      iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29455): Process ended prematurely: osmo-stp_10.42.42.5(pid=29455) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29455)]  [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8]
23:38:25.453419 tst                      iperf3.py:8: Test FAILED (8.0 sec)
23:38:25.513604 run   osmo-hlr_10.42.42.2(pid=29452): ERR: Terminated: ERROR {rc=237}  [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29452)]
23:38:25.562307 run   osmo-hlr_10.42.42.2(pid=29452): stdout: 
| (launched: 2022-12-08_23:38:21.938052) 
23:38:25.611674 run   osmo-hlr_10.42.42.2(pid=29452): stderr: 
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221208233822251 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221208233822268 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221208233822284 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221208233822285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221208233822285 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
23:38:25.653332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29447): Terminating (SIGTERM)
23:38:25.692942 run iperf3-srv_10.42.42.10(pid=29448): Terminating (SIGTERM)
23:38:25.733085 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29451): Terminating (SIGTERM)
23:38:25.773198 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29454): Terminating (SIGTERM)
23:38:25.812849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29458): Terminating (SIGTERM)
23:38:25.822434 ---      ParallelTerminationStrategy: PID 29447 died...
23:38:25.875306 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29447): Terminated: ok {rc=0}
23:38:25.885312 ---      ParallelTerminationStrategy: PID 29448 died...
23:38:25.938207 run iperf3-srv_10.42.42.10(pid=29448): Terminated {rc=256}
23:38:25.948100 ---      ParallelTerminationStrategy: PID 29451 died...
23:38:26.001207 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29451): Terminated: ok {rc=0}
23:38:26.010837 ---      ParallelTerminationStrategy: PID 29454 died...
23:38:26.063288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29454): Terminated: ok {rc=0}
23:38:26.073207 ---      ParallelTerminationStrategy: PID 29458 died...
23:38:26.125634 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29458): Terminated: ok {rc=0}
23:38:26.207946 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module>
    setup_run_iperf3_test_parallel(1)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29455): Process ended prematurely: osmo-stp_10.42.42.5(pid=29455) [trial-2351↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29455)]