Failed
gprs:trx-b200.ping_idle_ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28406): Process ended prematurely: osmo-stp_10.42.42.5(pid=28406) [trial-2351↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28406)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200 ping_idle_ping.py ---------------------------------------------- 23:34:54.869309 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:54.880912 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 23:34:55.024563 tst ping_idle_ping.py: using LAC 17527 23:34:55.151899 tst ping_idle_ping.py: using RAC 187 23:34:55.277448 tst ping_idle_ping.py: using CellId 17527 23:34:55.403228 tst ping_idle_ping.py: using BVCI 17528 23:34:55.427655 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.439006 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.450114 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.461453 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.472667 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.483795 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.495212 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:55.506556 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:55.780529 tst ping_idle_ping.py:24: start network... 23:34:55.904319 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:34:56.373693 run create_hlr_db(pid=28400): Launched 23:34:56.545543 bus /gobi_6: Setting Powered False 23:34:57.566382 run create_hlr_db(pid=28400): Terminated: ok {rc=0} 23:34:57.987228 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28402): Launched 23:34:58.302551 run osmo-hlr_10.42.42.2(pid=28403): Launched 23:34:58.419321 run osmo-stp_10.42.42.5: Starting osmo-stp 23:34:58.968270 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28405): Launched 23:34:59.284261 run osmo-stp_10.42.42.5(pid=28406): Launched 23:34:59.399409 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:34:59.950479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28408): Launched 23:35:00.063537 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:35:00.338997 run patchelf(pid=28409): Launched 23:35:00.524445 run osmo-stp_10.42.42.5(pid=28406): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28406)] 23:35:00.660932 run osmo-stp_10.42.42.5(pid=28406): stdout: | (launched: 2022-12-08_23:34:59.129014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:00.797182 run osmo-stp_10.42.42.5(pid=28406): stderr: | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233459321 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:00.939038 run osmo-stp_10.42.42.5(pid=28406): stdout: | (launched: 2022-12-08_23:34:59.129014) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:35:01.066322 run osmo-stp_10.42.42.5(pid=28406): stderr: | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233459320 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233459321 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233459323 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:35:01.213828 run patchelf(pid=28409): Terminating (SIGINT) 23:35:01.404819 run patchelf(pid=28409): Terminated: ok {rc=0} 23:35:01.438634 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=28406): Process ended prematurely: osmo-stp_10.42.42.5(pid=28406) [trial-2351↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28406)] [trial-2351↪gprs:trx-b200↪ping_idle_ping.py:27] 23:35:01.448725 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 23:35:01.512457 run osmo-hlr_10.42.42.2(pid=28403): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28403)] 23:35:01.563874 run osmo-hlr_10.42.42.2(pid=28403): stdout: | (launched: 2022-12-08_23:34:58.147879) 23:35:01.616780 run osmo-hlr_10.42.42.2(pid=28403): stderr: | �[0;m�[1;31m20221208233458346 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233458347 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233458347 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233458347 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233458347 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233458347 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233458359 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233458370 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233458370 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233458370 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:35:01.660905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28402): Terminating (SIGTERM) 23:35:01.705819 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28405): Terminating (SIGTERM) 23:35:01.750032 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28408): Terminating (SIGTERM) 23:35:01.760378 --- ParallelTerminationStrategy: PID 28402 died... 23:35:01.819780 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28402): Terminated: ok {rc=0} 23:35:01.830457 --- ParallelTerminationStrategy: PID 28405 died... 23:35:01.887156 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28405): Terminated: ok {rc=0} 23:35:01.897777 --- ParallelTerminationStrategy: PID 28408 died... 23:35:01.954393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28408): Terminated: ok {rc=0} 23:35:02.050592 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28406): Process ended prematurely: osmo-stp_10.42.42.5(pid=28406) [trial-2351↪gprs:trx-b200↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28406)]