Failed
gprs:trx-lms+mod-bts0-dynts-osmo.iperf3.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31528): Process ended prematurely: osmo-stp_10.42.42.5(pid=31528) [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31528)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-lms+mod-bts0-dynts-osmo iperf3.py ---------------------------------------------- 00:03:13.188639 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.199970 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:03:13.357666 tst iperf3.py: using LAC 17677 00:03:13.476311 tst iperf3.py: using RAC 82 00:03:13.595105 tst iperf3.py: using CellId 17677 00:03:13.721409 tst iperf3.py: using BVCI 17678 00:03:13.744629 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.755498 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.766128 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.776455 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.786839 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.797445 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.808250 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.818746 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:03:13.829328 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:03:14.122454 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 00:03:14.257487 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:03:14.589608 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31520): Launched 00:03:14.867521 run iperf3-srv_10.42.42.10(pid=31521): Launched 00:03:15.066468 tst iperf3.py:8: start network... 00:03:15.201818 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:03:15.711270 run create_hlr_db(pid=31522): Launched 00:03:15.902411 bus /gobi_6: Setting Powered False 00:03:16.921429 run create_hlr_db(pid=31522): Terminated: ok {rc=0} 00:03:17.364449 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31524): Launched 00:03:17.688626 run osmo-hlr_10.42.42.2(pid=31525): Launched 00:03:17.810050 run osmo-stp_10.42.42.5: Starting osmo-stp 00:03:18.371875 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31527): Launched 00:03:18.694918 run osmo-stp_10.42.42.5(pid=31528): Launched 00:03:18.812649 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:03:19.377396 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31530): Launched 00:03:19.492660 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:03:19.773855 run patchelf(pid=31531): Launched 00:03:19.963280 run osmo-stp_10.42.42.5(pid=31528): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31528)] 00:03:20.102596 run osmo-stp_10.42.42.5(pid=31528): stdout: | (launched: 2022-12-09_00:03:18.536128) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:03:20.241621 run osmo-stp_10.42.42.5(pid=31528): stderr: | �[0;m�[38;5;43m20221209000318729 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000318730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000318730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000318730 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:03:20.375219 run osmo-stp_10.42.42.5(pid=31528): stdout: | (launched: 2022-12-09_00:03:18.536128) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:03:20.507716 run osmo-stp_10.42.42.5(pid=31528): stderr: | �[0;m�[38;5;43m20221209000318729 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000318730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000318730 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000318730 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000318731 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:03:20.662127 run patchelf(pid=31531): Terminating (SIGINT) 00:03:20.843235 run patchelf(pid=31531): Terminated: ok {rc=0} 00:03:20.876282 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=31528): Process ended prematurely: osmo-stp_10.42.42.5(pid=31528) [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31528)] [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8] 00:03:20.886258 tst iperf3.py:8: Test FAILED (7.7 sec) 00:03:20.949049 run osmo-hlr_10.42.42.2(pid=31525): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31525)] 00:03:21.000381 run osmo-hlr_10.42.42.2(pid=31525): stdout: | (launched: 2022-12-09_00:03:17.529470) 00:03:21.052300 run osmo-hlr_10.42.42.2(pid=31525): stderr: | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209000317726 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209000317742 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-lms+mod-bts0-dynts-osmo/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209000317753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209000317753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209000317753 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:03:21.096691 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31520): Terminating (SIGTERM) 00:03:21.138419 run iperf3-srv_10.42.42.10(pid=31521): Terminating (SIGTERM) 00:03:21.180122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31524): Terminating (SIGTERM) 00:03:21.222196 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31527): Terminating (SIGTERM) 00:03:21.263713 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31530): Terminating (SIGTERM) 00:03:21.273420 --- ParallelTerminationStrategy: PID 31520 died... 00:03:21.329145 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31520): Terminated: ok {rc=0} 00:03:21.339171 --- ParallelTerminationStrategy: PID 31521 died... 00:03:21.394282 run iperf3-srv_10.42.42.10(pid=31521): Terminated {rc=256} 00:03:21.404474 --- ParallelTerminationStrategy: PID 31524 died... 00:03:21.460021 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31524): Terminated: ok {rc=0} 00:03:21.470653 --- ParallelTerminationStrategy: PID 31527 died... 00:03:21.525964 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31527): Terminated: ok {rc=0} 00:03:21.536330 --- ParallelTerminationStrategy: PID 31530 died... 00:03:21.591659 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31530): Terminated: ok {rc=0} 00:03:21.677550 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31528): Process ended prematurely: osmo-stp_10.42.42.5(pid=31528) [trial-2351↪gprs:trx-lms+mod-bts0-dynts-osmo↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31528)]