Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.iperf3.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29940): Process ended prematurely: osmo-stp_10.42.42.5(pid=29940) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29940)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa iperf3.py ---------------------------------------------- 23:45:08.156181 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.167677 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:45:08.333289 tst iperf3.py: using LAC 17581 23:45:08.463662 tst iperf3.py: using RAC 241 23:45:08.584485 tst iperf3.py: using CellId 17581 23:45:08.701277 tst iperf3.py: using BVCI 17582 23:45:08.724665 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.735661 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.746518 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.757752 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.768888 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.779797 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.790829 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.801682 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:45:08.812748 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:45:09.103823 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:45:09.238176 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:45:09.569886 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29932): Launched 23:45:09.845141 run iperf3-srv_10.42.42.10(pid=29933): Launched 23:45:10.042755 tst iperf3.py:8: start network... 23:45:10.176902 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:45:10.689701 run create_hlr_db(pid=29934): Launched 23:45:10.875182 bus /gobi_6: Setting Powered False 23:45:11.897157 run create_hlr_db(pid=29934): Terminated: ok {rc=0} 23:45:12.302735 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29936): Launched 23:45:12.606151 run osmo-hlr_10.42.42.2(pid=29937): Launched 23:45:12.722141 run osmo-stp_10.42.42.5: Starting osmo-stp 23:45:13.252422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29939): Launched 23:45:13.554429 run osmo-stp_10.42.42.5(pid=29940): Launched 23:45:13.665563 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:45:14.192655 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29942): Launched 23:45:14.301454 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:45:14.565552 run patchelf(pid=29943): Launched 23:45:14.743284 run osmo-stp_10.42.42.5(pid=29940): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29940)] 23:45:14.873852 run osmo-stp_10.42.42.5(pid=29940): stdout: | (launched: 2022-12-08_23:45:13.405741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:15.004683 run osmo-stp_10.42.42.5(pid=29940): stderr: | �[0;m�[38;5;43m20221208234513575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234513575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234513576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234513576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234513576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234513577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234513577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:15.130393 run osmo-stp_10.42.42.5(pid=29940): stdout: | (launched: 2022-12-08_23:45:13.405741) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:45:15.254772 run osmo-stp_10.42.42.5(pid=29940): stderr: | �[0;m�[38;5;43m20221208234513575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208234513575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208234513576 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208234513576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208234513576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208234513577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208234513577 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:45:15.399722 run patchelf(pid=29943): Terminating (SIGINT) 23:45:15.570290 run patchelf(pid=29943): Terminated: ok {rc=0} 23:45:15.601534 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29940): Process ended prematurely: osmo-stp_10.42.42.5(pid=29940) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29940)] [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8] 23:45:15.610818 tst iperf3.py:8: Test FAILED (7.5 sec) 23:45:15.671014 run osmo-hlr_10.42.42.2(pid=29937): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29937)] 23:45:15.719700 run osmo-hlr_10.42.42.2(pid=29937): stdout: | (launched: 2022-12-08_23:45:12.456273) 23:45:15.769300 run osmo-hlr_10.42.42.2(pid=29937): stderr: | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208234512629 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208234512641 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208234512649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208234512649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208234512649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:45:15.811097 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29932): Terminating (SIGTERM) 23:45:15.882209 run iperf3-srv_10.42.42.10(pid=29933): Terminating (SIGTERM) 23:45:15.934485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29936): Terminating (SIGTERM) 23:45:15.977736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29939): Terminating (SIGTERM) 23:45:16.028157 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29942): Terminating (SIGTERM) 23:45:16.040476 --- ParallelTerminationStrategy: PID 29932 died... 23:45:16.110324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29932): Terminated: ok {rc=0} 23:45:16.122658 --- ParallelTerminationStrategy: PID 29933 died... 23:45:16.189099 run iperf3-srv_10.42.42.10(pid=29933): Terminated {rc=256} 23:45:16.200867 --- ParallelTerminationStrategy: PID 29936 died... 23:45:16.267126 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29936): Terminated: ok {rc=0} 23:45:16.279653 --- ParallelTerminationStrategy: PID 29939 died... 23:45:16.346060 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29939): Terminated: ok {rc=0} 23:45:16.358781 --- ParallelTerminationStrategy: PID 29942 died... 23:45:16.426154 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29942): Terminated: ok {rc=0} 23:45:16.529664 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29940): Process ended prematurely: osmo-stp_10.42.42.5(pid=29940) [trial-2351↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29940)]